A super satisfying watch, great result! The grey underseal in the cartridge looks like interesting stuff, not far off OE textured finish either. Weird the way it spits onto the panel though. I bet you were sick of the sound of your compressor by the end. 😆
@BadE3011 ай бұрын
Thanks man. You can also get it in a beige which is a close match for the colour if you don’t plan on spraying over it! That poor compressor is having a rest and an service when I get chance, it took a battering!
@PompeyMatt1711 ай бұрын
mate. That is …..stunning...… I'm currently refreshing the underside of my Z3 (which is half E30 half E36) and I was on my Z3 forum perplexed as to how you can spray sealant from a tube.... and you solved the mystery !... apparently an alternative is to brush it on and stipple with a sponge..... but that looks epic....
@BadE3011 ай бұрын
The gun application is great! A bit pricey for the gun itself.. Good luck with your z3!
@PompeyMatt1711 ай бұрын
@@BadE30 cheers mate.. I'm also using POR15 Metal Prep but with Hammerite Red oxide and Hammerite Smooth...
@osmaks151811 ай бұрын
That's some restoration porn! 😂 Great job, keep it up!
@BadE3011 ай бұрын
Haha😎😎
@fredlarimer79358 ай бұрын
Huge respect for all of the efforts you have gone to in order to protect your E30 going forward. Thankfully I live in So Cal where the majority of our cars are not subjected to the rust-inducing elements you and your friends live with in your area of the world.
@BadE308 ай бұрын
Thanks man. Yes unfortunately our UK cars take a real beating, especially during the winter months. I’m sure my car won’t be out on the road in bad weather now!
@fredlarimer79358 ай бұрын
@@BadE30 Indeed. As a comparison, my own 12/87 build E30 325iC has 177k milees on the clock with nary a sign of the rust monster. We should all be so fortunate ;)
@rinna8811 ай бұрын
So satisfying to watch this! Randomly stumbled upon your video thanks to the YT algorithm haha. Awesome job!!! 🎉
@BadE3011 ай бұрын
Thanks dude!!
@LearnToRace11 ай бұрын
Patience of a saint using that underseal gun having to spray in such a small pattern
@BadE3011 ай бұрын
To get to this stage in a car restoration you have to be quite a patient person.. Nothing on this project can be rushed!
@sicks6six11 ай бұрын
therapeutic to watch this video, looking forward to the end product, I had a lend of one of them cars years back and it was a great car, The only negative it didn't have A/C, does yours or are you retrofitting A/C, someone makes a kit for them driven by the serpentine belt as the car I had borrowed eventually had it fitted, this was back in 1980s,
@BadE3011 ай бұрын
Glad you enjoyed it! I won’t be needing A/C with the car being the the UK! Would only be needed a couple times a year. But yes I have seen that kit😎
@balinttorok78788 ай бұрын
It is amazing! What type of gun did u use, name of the gun?
@BadE308 ай бұрын
It’s the specific gun for the CE Chem sealer, you can find it on their website!
@s4ms0n1t311 ай бұрын
Was that a 2k satin paint you used or just straight base coat?
@BadE3011 ай бұрын
2k satin dude, went with a RAL colour as close as possible to laguna green
@benoconnor264911 ай бұрын
Did you make that rotisserie thing or buy it?
@BadE3011 ай бұрын
Home made dude. I wasn’t happy with the ready made ones, not sturdy enough for me!
@benoconnor264911 ай бұрын
@@BadE30 ah fair play man looks well. Any tutorial videos on how to build it coming soon? Haha
@AdrianMidgey111 ай бұрын
Amazing work - Ive been following yourself and Ants builds for a while now - I'm at a similar stage with mine. Many years stripping and repairing the underside. Just epoxy primed it and had planned to over paint in hammerite 🙈 Figured the colours only for vanity, but after watching the extra underseal (and effort) you've gone to, seems worth going that extra! What size compressor did you use? I'll need to buy one as it's all been hand paint till this point 👀
@BadE3011 ай бұрын
Great work man!! It’s not a quick process!! Mines a 100ltr and it was able to keep up with the spraying all day, I do feel quite bad for it though. Needs a service for sure now
@doom196111 ай бұрын
Dude that thing is going to be THE creme de la creme E30 when finished. I really appreciate the love u r putting in. Looking forward to the next video!
@BadE3011 ай бұрын
Big thanks man!! More to come soon, currently getting the inside of the car cleaned up ready for paint, soundproofing etc
@doom196111 ай бұрын
@@BadE30Happy to hear that man. Any ideas about cosmetics speaking of Wheels etc. ?
@BadE3011 ай бұрын
@@doom1961 going for some 15”x8/9J with a real chunky tyre setup. I’ve seen 245/40’s fit but i think that may be a bit too much.. other than that; IS front lip, SE side skirts and a very rare mtech 2 rear spoiler!
@doom196111 ай бұрын
@@BadE30keeping it tasteful i like it hahah
@selespeed311 ай бұрын
with this kind of work quality, I don;t mind to have you restore my car. I am in Malaysia.
@BadE3011 ай бұрын
Thanks!
@briangreen660211 ай бұрын
Nice job. Does the finish paint have to be applied while the undersealnis tacky, or could it be applied just as well at a later date ?
@BadE3011 ай бұрын
Thanks, yeh man it’s a wet on wet application. I’m sure it doesn’t adhere well if cured
@richardgibson134711 ай бұрын
Cracking work lads, I did my first underside laid on my back while the car was on axle stands what a ball ache that was lol
@BadE3011 ай бұрын
Cheers Richard, I couldn’t imagine doing it on the floor! Props to you for that
@jameshay46911 ай бұрын
Outstanding, looks brilliant and all these modern coatings will make it better protected than factory. These videos are always worth the wait, and thoroughly enjoyable to watch.
@BadE3011 ай бұрын
Thanks James. Very happy with how it came out!!
@dhilankerai358511 ай бұрын
Stunning work. It’s come a long way. One thing I would have added and am suggesting you do is to spray cavity wax inside all the frame rails. Just an added layer of protection for longevity of the underside. Good work nonetheless!
@BadE3011 ай бұрын
Thanks man! This is on my list, but once the interior is painted and a few other bits are done. However, a good reminder as I do have so much going on at times!
@SkidsNDonuts11 ай бұрын
Oh man that is outstanding!
@BadE3011 ай бұрын
Appreciate it!
@ceciliaremusneferu979710 ай бұрын
Nice job,artist
@BadE3010 ай бұрын
Thank you!
@karlheinz90129 ай бұрын
Macht alles einen guten Eindruck. Ich bin auf das Endergebnis gespannt.
@BadE309 ай бұрын
Thank you very much! More to come soon
@samuelgibson6158 ай бұрын
What size compressor did you use for this?
@milkini197911 ай бұрын
Very nice!
@BadE3011 ай бұрын
Thanks!
@cechemlimited4 ай бұрын
Do you mind if we share a link to your video? Thanks. Chris Ce Chem Limited
@BadE304 ай бұрын
Hi, feel free to! Thanks
@josiptadic830111 ай бұрын
Good work!
@BadE3011 ай бұрын
Thanks😎
@gilberesrepairs10 ай бұрын
Just stumbled across your channel…. Well done gents it looks excellent! Gotta binge watch all your previous vids now 😂 Nice to see another small channel like my own, as you are still relatable to the average person 👍👍
@BadE3010 ай бұрын
Haha cool as! Thanks man
@twinshobbytwinshobby386311 ай бұрын
Great JOB ! RESPEKT !
@BadE3011 ай бұрын
Thank you!
@JackkLeee11 ай бұрын
Your rollover jig is a work of art, as is the rest of this project 😂
@BadE3011 ай бұрын
I made it myself, mostly by eye until it looked right!
@JackkLeee11 ай бұрын
@@BadE30 outstanding man, never seen the bearings incorporated, makes it float by the looks of you rotating it, serious quality build 👌🏼😎
@RestorationApprentice11 ай бұрын
Huge job, and it turned out great!
@BadE3011 ай бұрын
Thanks man!
@mr_blackwolf8 ай бұрын
I just discovered the channel and I‘m thrilled. Restoration with passion and thanks for sharing.
@BadE308 ай бұрын
Great to hear man! I hope you enjoy it as much as I do
@Sorento19-7710 ай бұрын
А пуш сало когда?)
@TheNorthernmunky9 ай бұрын
Awesome job mate
@BadE309 ай бұрын
Thanks man!!
@becomematrix11 ай бұрын
future classic
@BadE3011 ай бұрын
🫡🫡
@SusiSorglos-o5e11 ай бұрын
You make a perfect job. Congratulation from austria. 🇦🇹
@BadE3011 ай бұрын
Appreciate it!
@benwalsh444011 ай бұрын
I really like how you matched your undercoat colour to your fence panels.
@BadE3011 ай бұрын
Haha! They’re my neighbours, he must of given me the idea.. hope it’s not the overspray 😂
@michaeljohn88426 ай бұрын
Hi what type of paint u use at the end
@BadE305 ай бұрын
Just simple RAL 2k paint
@АлександрФунтик-ц4з11 ай бұрын
Дружище,проделана просто отличная работа!!!!!!!!!!! Восхищаюсь тобой!!!
@BadE3011 ай бұрын
Thank you!
@pimvoortuin298 ай бұрын
awsome finish! looking forward to the rest
@BadE308 ай бұрын
Not long now, should be back on the floor by next week!