Ep.3 - 2024 HARLEY DAVIDSON CVO ST Ready for the Road!

[@carminecalucciCVO]

I own the same CVO ST at first I was unsure about these mods especially on CVO but I have to say you nailed it. It’s beautiful. It’s clean and it’s still a CVO! What an amazing build and in keeping the originality of a CVOST well done, fellas!!!

[@Me.MyMachinist.and.l]

Couldn't agree more!

[@davidwhittaker5587]

I love bikes like these…you give it a glance and notice something different and the more you look the more you notice….. great bike 👍🏻

[@robertrodriguez2412]

Great idear on the handle bars!

[@Me.MyMachinist.and.l]

Thanks!

[@JimCunningham-m1b]

I really like that back rotor replacement That will deffinetly be added to my black 2024 CVO ST I replaced the mufflers with a TAB performane 5" black chrome exhaust and a Bad Boyze extended seat. Also epoxy painted the front embossed Brembo rotors. Why that wasn't done from the factory, don't know. Your transforming a cool bike to the next level! Looks great! Ride safe brother!

[@Me.MyMachinist.and.l]

Thank you!!

[@keganadcock8253]

Belts are for pants, keep up the great work!

[@Me.MyMachinist.and.l]

Yes they are!

[@raynavarra]

New sub here. Watched this video because I love the new road glide st. I think what you guys have done really bring the bike to that next level. I especially love the rear fender and bars. I’ll be catching up on the videos I missed. Kudos to you both for stepping outside the box with original stuff Justin certainly knows his way around a bike. Love the CNC stuff. I would love to see some type of mod for the rear lights. They just look to bulky back there with the new fender.

[@Me.MyMachinist.and.l]

Welcome!!! And yeah, typically on these subframes, we incorporate a different set of small lights that are almost not noticeable when the lights are off. These make for a real clean look. We wanted to try something different with this one but trying to stick with as much genuine H-D parts as we could. They are big though for sure

[@raynavarra]

Cool. I definitely get it. Appreciate the response. Maybe in person they look better. Thx

[@travisstarun2342]

I want one of those air cleaners

[@Me.MyMachinist.and.l]

Alloy Art is coming out for one for the 2024 and up. May already be out so no need to create adapters like we did

[@travisstarun2342]

Awesome. Thanks. I’ll call them.

[@bigjohn2323]

Nice Job !!!!

[@kmeades43]

Awesome, classy build guys. NEW SUBSCRIBER from Sydney Australia. Love the bars and air cleaner 🤘🤘

[@Me.MyMachinist.and.l]

Welcome aboard!

[@davidmedeiros6579]

i want a set of those rear peg brackets love that look

[@Me.MyMachinist.and.l]

Message Justin on IG, @mymachinist. He might be willing to make up a couple of sets

[@christophermoon1291]

Very cool

[@angelsierra1988]

Very Nice !!

[@wardamberson2535]

Can the air cleaner be purchased with mounts everthing? I have the same bike love the air cleaner and design look If so please let me know and cost

[@Me.MyMachinist.and.l]

Message Justin Via the Mymachinist website or on Instagram. I’m sure he will be willing to sell the bite and pieces to install this setup on your bike

[@custommotorsaudio]

Love how you build it up, whenever you have the adapter for the aircleaner ready I am interested

[@Me.MyMachinist.and.l]

Message @mymachinist on Instagram. I’m sure he can have a few kits made. No idea on cost since its includes the adapter and spacers as well

[@leftymike8730]

Looks great, I don’t love the bar/riser setup bit with that big TFT display it makes sense not to block it

[@Me.MyMachinist.and.l]

Def looks better in person

[@dannysonier8282]

Very nice, wish is could buy risers to mate with the stock bars. Awesome bike

[@Me.MyMachinist.and.l]

Justin is able to produce risers to accept the 1 1/8” factory bar. As well as a few other companies out there.

[@dannysonier8282]

@@Me.MyMachinist.and.l I haven’t found anything yet, I love the OEM look however not much available in Canada to adjust ergonomics. Nice work!

[@Me.MyMachinist.and.l]

Mymachinist, Boosted Brad, Forbidden Moto, I know can make and ship you a set of risers. You just have to make sure the clamping surface is 1 and 1/8” diameter and it will work

[@dannysonier8282]

Thanks for the info, I tough the CVO ST bars were 1-1/4 dia?

[@Me.MyMachinist.and.l]

You’re correct. The shim he made is a 1/8” which is 1/4” when you add the two halves. My bad!

[@WolfRacing-ol3wc]

The content is excellent.. would you pls provide info on the Ohlins stabilizer installed on this build, perhaps a video ?

[@Me.MyMachinist.and.l]

He is still working on making a mount for the stabilizer. We will try to film the best we can. It’s been hard lately with crazy schedules and just the summer overall but should be able to get some footage out to y’all hopefully. If not on here, at least on Instagram

[@Bikerbug2020]

Honestly not digging the shorty pipe, but to each their own. The mirrors look really nice, the red accents look good too.

[@Me.MyMachinist.and.l]

I can respect that. I personally have never owned a HPI pipe, but they do sound great and make really good power. I personally like more of a mid to almost full length exhaust on a bagger.

[@Jeebs-ml6qj]

Where is the rear subframe from? And how are the bags mounted to hold weight in them? Thanks love the build

[@Me.MyMachinist.and.l]

The subframe is made here by us, Mymachinist. It uses a brace system on the back side of the bag to hold the weight, retaining the factory two bags attachment bolts and adding two more on each bag. Bags stay sturdy and tight against the bike

[@Jeebs-ml6qj]

@@Me.MyMachinist.and.l thanks for getting back to me. Will you have those and the swing arm available for purchase? And I am waiting for the next episode for you raising the bike up. I’m 6’4” and need the lower seat like you and want the bike higher. I know seat and bars are one off built but love the configuration

[@Me.MyMachinist.and.l]

Hopefully we will be getting started on it soon. Bike just returned from its trip. And if you’re on Instagram, message Mymachinist directly to inquire on products and prices. I know Justin just cut some swingarms, not sure how many are still available.

[@Jeebs-ml6qj]

@@Me.MyMachinist.and.l thanks and I have subscribed and sent a message.

[@OnyxCVO]

Looks good. How about the license plate mount? Are you going saddlebag?

[@Me.MyMachinist.and.l]

Yes, we used one of the removable plate mounts that slides on the bag and can be removed if needed

[@OnyxCVO]

@@Me.MyMachinist.and.l Just did my rear forged carbon fender on my 24 CVO ST, I did the hoffman seat bolt license plate and custom dynamics LED frame, turned out amazing. Love forged carbon fiber, the contrast in the sun is out of this world...

[@Cgny]

Fuckin badass. I didn’t like that bars at first bc I’m a true dyna bro lol but after he described why he designed them that way I was totally sold! Lol

[@Me.MyMachinist.and.l]

They def work for the look and vibe on this bike!

[@sleepingpanda8927]

Please, how can I get my hands on your passenger foot peg mod. I have the same white ST CVO and agree on your stock mod design keeping with the stock theme. The thrashin I have on there now looks a little out of place.

[@Me.MyMachinist.and.l]

Message @mymachinst on IG. Since the program is written, he should be able to create a few sets for those interested. We would also have to buy the pads from HD and drill and tap one extra screw hole for them to work properly

[@JCMaxi]

apologies if I missed it in video, but is the engine/cam stock? I'm wanting these pipes on this bike, but been waiting for a tuner and cam upgrade.

[@Me.MyMachinist.and.l]

Yes, it is. Motor is completely untouched. And Thundermax just introduced a tuner for the 2024 in Sturgis the other day

[@manueltruthjaime]

how can I get those bars?

[@Me.MyMachinist.and.l]

Sickbaggercompany.com It’s the 7” bar kit they offer. Collab with mymachinist

[@alessandrobecagli1780]

Please the name of the brand for the mirrors thanks 🙏🏼

[@Me.MyMachinist.and.l]

They are the Moto Gadget mo. View glassless mirrors.

[@alessandrobecagli1780]

@@Me.MyMachinist.and.l thank you 🙏🏼

[@travisfinlayson4137]

no chaindrive conversation??

[@Me.MyMachinist.and.l]

No, Jetty has a crazy fast and built Harley, he wanted to keep this one very tame and enjoyable. Just something to get on and ride.

[@alpinestar1123]

Do you say makida carb

[@Me.MyMachinist.and.l]

Yeah 😂😂. I get things mixed up, basically it’s a new style carb with a rechargeable battery 🤣🤣

[@alpinestar1123]

@@Me.MyMachinist.and.l LMAFO its all good love the videos man

[@robertnorris1882]

Which air cleaner is that?

[@johnprice8625]

Can you give me a set of those new bars you got for that ST

[@Me.MyMachinist.and.l]

If you’re on Instagram, message Rob at SBC Performance and let him know you’re interested in the same set, I’m sure he will make you a set for sure!

[@crestophergonzales8659]

First

[@buckbuck2974]

y'all just ruined the CVO/ST good grief!!

[@Me.MyMachinist.and.l]

Ruined? How so? Everything done to this bike can be undone easily, not to mention the bike still looks much like it does from the factory 🤷🏻‍♂️🤷🏻‍♂️🤷🏻‍♂️