You have done an amazing job at breaking this down for a Newby to the ar platform. Thank you so much, definitely subscribing
@At3tactical27 күн бұрын
Welcome to the channel! 😎
@mikelasa5173 Жыл бұрын
This is perfect timing! I am looking to change my Handrail right now! Very informative and clear explanation! Thanks!
@At3tactical Жыл бұрын
Great to hear! Glad we could help. We've got a bunch more on the way, so thanks for watching!
@GoCards5122 ай бұрын
what did you end up getting? i just ordered Midwest Industries AR-15/M16 M-Series Two Piece Drop-In M-LOK Handguard 7"
@daynapper7337 Жыл бұрын
I thought i recognized Randy, I used to watch him on BRS. Cool to see him in another hobby of mine
@At3tactical Жыл бұрын
Heyyy! Good to see you over here too. :)
@zx-39482 жыл бұрын
It just looks so much better when the handguard covers the entire barrel, all the way to the muzzle
@At3tactical2 жыл бұрын
100% .... sexy factor is really what handguards are all about! 😆
@bonganimtshali1505 Жыл бұрын
Does that vibration I noticed don't have bad impact??
@therealandrewcano Жыл бұрын
I agree
@veandreyahuda5333 Жыл бұрын
I’ve been searching for this tirelessly how do I find an upper like that or do I just get a hand guard the same length as the barrel
@KiLLJOY1056 Жыл бұрын
i think the opposite lol i like when the barrel sticks out 2-3" inches!
@chrissewell1608 Жыл бұрын
I have really been enjoying this series. For the new AR builder, getting into this hobby, this is a wealth of great information!
@capt.martin51692 ай бұрын
Great info! Thanks, you do a great job at simplifying and explaining the differences and pros and cons, much appreciated!
@At3tactical2 ай бұрын
Glad it was helpful!
@Viperjjr2 жыл бұрын
Another great and informative video in the series. 🙏👍🏼👍🏼
@willie00019 ай бұрын
Good content, I pretty much guessed as much but great to hear it confirmed 👍
@At3tactical8 ай бұрын
Glad you liked it!
@JamieR20779 ай бұрын
Hmm was hoping you'd go over specific makes and models
@brian_b_music2 жыл бұрын
In my humble opinion, you just can’t beat a good quad rail!! I’ll gladly bear the extra weight, to have all of the rails I’ll ever need………And then some!!
@Matt_justlikethat7 ай бұрын
Just put in a Midwest industry aluminum picatinny rail. The cost was $149 drop in. Removed the polymer no-connect handgard
@Matt_justlikethat7 ай бұрын
Quad rail
@Whatisright Жыл бұрын
I still go with the quad rail. All accessories come slotted so there's no extra step, no extra pieces that could fail somehow.
@KiLLJOY1056 Жыл бұрын
I gotta say I think the #1 reason Mlok is used is because its so slim and weightless. its basically like cutting weight holes, that can also be used for mounting.
@charlesd8760 Жыл бұрын
Totally win-win
@walterrising4276 Жыл бұрын
Guess that explains why mlokers always complain about weight
@brycemorgan670810 ай бұрын
I head mlok free floats heat up real fast though; and that’s with gloves on.
@jeffheyer77837 ай бұрын
Not really…
@jeffheyer77837 ай бұрын
I have free float mlok and never feel any heat while shooting.
@DesertTactical2 жыл бұрын
Awesome video, guys!! Good explanation on the difference. Aaah. The delta ring… good stuff!
@InvestWithFFIАй бұрын
This was a phenomenal breakdown! Thank you.
@At3tacticalАй бұрын
Glad it was helpful!
@sharedpollard4407 Жыл бұрын
I love Aero Precision Atlas S and Quantum, but you do need their BAR barrel nut for the latter.
@jeffmurphy998710 ай бұрын
I’ve been running a pic rail drop in for over 30 years on my Bushmaster. I’ve never had a issue with it and since I run heavy barrels no shift in point of impact. Plus I can remove it without tools for cleaning oiling the barrel. But if you run a bunch of lights lasers or kitchen sink then the free float is probably for you.
@duelsporthonda90032 ай бұрын
Pros and cons. One isn't necessarily better or worse.
@denlaugal Жыл бұрын
WTF….Hey ,, Randy I’m a BRS fan…. Nice to see you here too.
@At3tactical Жыл бұрын
Glad you found me!
@joey42438 ай бұрын
I love my m lok slim free floating hand guard on my ruger ar556 no fixed front sight just a slimmer profile all around
@s.o.f.fpatriotsforlife414 Жыл бұрын
I love quad rails
@reniegustilo9525 Жыл бұрын
Nice comparison & explaination.
@At3tactical Жыл бұрын
Glad it was helpful!
@buddy82 Жыл бұрын
Great video. Deserves more views
@At3tactical Жыл бұрын
Glad you think so!
@v.german11b Жыл бұрын
Excellent presentation! 👏🏼
@At3tactical Жыл бұрын
Thank you! Cheers!
@abcha0s2 жыл бұрын
Looks like a gyre to me. 🙂
@mohammedcohen Жыл бұрын
...good series, my friend...
@At3tactical Жыл бұрын
Glad you enjoy it!
@JasonGarcia-t3yАй бұрын
Don’t forget about U-LOK from Brigade Manufacture Firearms or Brigade Firearms
@bradisaacson4656 Жыл бұрын
i have owned multiple AR's for years. All of them with continuous Picatinny at top and MLOK sides and bottom. I have struggled with MLOK and basically don't like them. From spinning Mlok nuts that refuse to bite the tabs to the barrel heat 'fixing' the Blue LOK-TIGHT to the handguard. Given that, I am leaning towards quad-rails. I know that weight can be an issue but simply, I don't care. Ease of attachment without fighting those pesky mlok pieces makes my change over a no-brainer.
@bigmacfullerton7870 Жыл бұрын
I have keymod handguards on a few older rifles and I like it better than MLOK for attaching stuff. But supposedly keymod rails aren’t as strong in drop tests and didn’t get the military contract so it’s been phased out.
@terekv4785 Жыл бұрын
Awesome video.
@At3tactical Жыл бұрын
Thanks!
@Goyahkla100Ай бұрын
You only mentioned size configurations at the very end and nothing to do with AR Pistols. What size would you recommend on an 11.5 barrel? Just ordered a PSA... Great video, and Thanks!
@At3tacticalАй бұрын
I would recommend a 9 or 10 inch handguard. The AT3 SPEAR M-LOK Handguard or the STNGR M-LOK Free Float AR-15 Handguards are great options.
@JeromeBrownell2 жыл бұрын
Great show. Thank you
@At3tactical2 жыл бұрын
Thanks for checking it out!
@mrshort23792 жыл бұрын
I would love to have a new handguard especially a 15.5" to but up to or over the muzzle device closing that horrible little 1/2" gap left from a 16" barrel and a 15" handguard plus I miss the older version with the larger inner diameter such as 1.5" or 1.75 I.D. with a split top. now those were nice and felt as if you were holding a gun. these newer style slim Handguard 1.35" I.d. just feel, out don't know not right or uncomfortable a little lighter yeah but not worth giving that wider I.D. plus you had the option of if you wanted, to go over a muzzle device or suppressor.
@ForceRecon112 Жыл бұрын
I still prefer a hearty, well made quad rail over m-lok since i've seen plenty bend or disfigure when put under heavy use especially with some form of heavier light or IR device. A Larue, Ris II, or BCM QRF quad rail is my gold standard
@At3tactical Жыл бұрын
Hear! Hear!
@ole_smokey_south4 ай бұрын
I like the quad rail. It looks cool and I can put more optics on them too.
@geektarded Жыл бұрын
After you have the mlok on the angled sides (6 sides with mlok), it’s hard to go back to just having mlok on the sides and bottom. Midwest Industries, BCM MCMR and Geissele are a few good ones with that.
@locophoto6881 Жыл бұрын
Great video, very helpful sincerely so thank you. :) And..mind if ask what that OD green looking swiss army tool is? Looks to be the perfect do it all device with great grip?
@At3tactical Жыл бұрын
Thanks, glad to help! That little field tool is the Real Avid Gun Tool Pro for AR15. (YT won't let me post a link, but we've got all the Real Avid gear on our site).
@lobbyrobby5 ай бұрын
Great stuff. Thank you
@cruisey9857 Жыл бұрын
Great video, my only confusion is who makes a hand guard that can go around my gas block. I have a M&P Sport II and I don't really want to change the gas block but I can't seem to find a guard that goes around the gas block (I do not have iron sights) other than the one made for models WITH the iron sight up front.
@bigmacfullerton7870 Жыл бұрын
You have to get a low profile gas block if you want a free float hand guard. it’s part of the deal
@steventaylor702 Жыл бұрын
Used to watch you on brs now i get to see you here cool i didnt know you left brs till just now
@At3tactical Жыл бұрын
Hey good to see another salty shooter over here! Yeah, about a year ago now I swapped over...If you ask me, I sorta like guns more. 😅
@DualSenseless7 ай бұрын
there are drop in handhguards that are longer than the gas block, it just ignores the fixed front sight.
@chaos-jp7nt Жыл бұрын
Thank you for this video
@At3tactical Жыл бұрын
Thanks for watching!
@eastwood40062 жыл бұрын
Love my Daniel defense RIS II. Ultra strong quad rail. Yes it's a cheese grader, but I have extremely large hands/long fingers and like to use thin gloves. Even without gloves heat is not an issue. It's currently on a 10.3" MK18. But I might be switching to a 12.5 soon with adjustable gas block when the ATF quits dragging their dicks around letting me pick up my supressor I've already paid for and own 😠
@At3tactical2 жыл бұрын
We definitely feel you on that one! 🙄
@chozen_juan Жыл бұрын
I can get my handguard off no problem. Its the typical plastic 2 piece guard. I measured it and its 6inches. Directly in front of it is that giant front site piece. The issue is most of the aftermarket guards im seeing are 10.5in or longer. How can I make it fit?
@At3tactical Жыл бұрын
There are a couple options here that most folks take when they have that Delta Ring style "drop-in" handguard. First.... Pickup something like the UTG Super Slim Carbine Drop-In Handguard (sorry, YT hates when I drop links, but we carry it on AT3). Here's a video Travis did about that specific handguard that might help: kzbin.info/www/bejne/jIvWf62ba6xopsk Secondly, you could do a little bit of easy "gunsmithing" and knock your front sight post off; replace it with a low profile gas block; and now choose any free float handguard your heart desires. Good thing is... We did a video on that process also. Here's the link - kzbin.info/www/bejne/onipq56CZrySqbs ***Hope that helps!*** -Randy
@some_cool_random_guy Жыл бұрын
1:50 the m16a1/sp1 is so beautiful
@At3tactical Жыл бұрын
Absolutely!
@mrshort23792 жыл бұрын
There needs to be allot more outer shapes to appeal to the aesthetics the handguard. such as other then round, hexagon, add maybe oval, rectangular even diamond and there are rarely some other shapes such as square and pyramid and then really most lightening cuts are all bland repetitive and lack imagination. some of us aren't in the military and look for aesthetics, when it comes to designing our AR's but we still want it tacticool heck even do a handguard that at least looks futuristic what ever happens to the Blast-AR handguard that needs updated to M-lok it was a 2 piece that was free float I mean come on somebody surely can do something different that doesn't look the same as all the other handguard on the market at least add some new outer shapes like previously mentioned
@At3tactical2 жыл бұрын
100% agree. This is 2022...let's explore some shapes and ergonomics! Well, said. Thanks for watching!
@gussandoval33 Жыл бұрын
Can anyone tell me what setup this is in minute 2:30 and again in min 5:30? I'm looking to get that same look on my AR
@At3tactical Жыл бұрын
Here's the breakdown of the little 5.56 AR Pistol... 1) Handguard & Upper Receiver - AT3 Tactical Spear MLok & AT3 Slick Side Upper (Gray) 2) Muzzle Device - KAK Slimline Flash Can 3) UTG 45degree Offset Pic Rail 4) AT3 ARO Mini Red Dot (on 45degree mount) 5) AT3 3xP Prism Scope (Top rail) 6) Hexmag 30rd Mag (Gray) 7) Magpul MS4 Sling (Gray) 8) SB Tactical SBA4 Pistol Brace (Gray, but...wobbler with new impending regulations.😡)
@gussandoval33 Жыл бұрын
@AT3 Tactical you are awesome! That's more info than what I was expecting. I want that handguard and the muzzle can. Thanks got the info.
@billbeam80692 жыл бұрын
Good video brother
@At3tactical2 жыл бұрын
Thank you, thank you.
@michaeltaylor78437 ай бұрын
Try a bushmaster xm15 swat model 90831
@kristing2182 Жыл бұрын
Great explanations for a newb like me
@At3tactical Жыл бұрын
Glad to help!
@reiniergarcia Жыл бұрын
UTG rocks.
@MF-Rell2 жыл бұрын
Question does the warranty cover the upper receiver chipping? I love mine just hate the cosmetic issues I'm dealing with atm.
@At3tactical2 жыл бұрын
We can definitely help out! Give us a call or shoot an email and let Kevin or Vin know we chatted here on YT. -Randy
@MF-Rell2 жыл бұрын
@@At3tactical Thank you 🤝🏾
@Allyourbase1990Ай бұрын
I miss the hand guards on my M-16 😂😂
@infected72589 ай бұрын
I need a drop in hand guard that has picatinny rails but goes further than the gas block, looking for something around 10 inches long, any suggestions, I don’t like hand guards that go most of the way of the barrel, I quite like seeing the barrel
@At3tactical9 ай бұрын
Check Out the UTG Pro 12″ AR-15 Drop-in Quad Rail, We have them in stock.
@mazrimtaim12649 ай бұрын
If I have a wedge lock system handrail that came installed on my AR can I install a new wedge lock handrail by a different manufacturer without changing the barrel nut?
@At3tactical9 ай бұрын
It could possibly work. Check the outside diameter of the barrel nuts, if they are the same then you should be good to go.
@dwanealton4414 Жыл бұрын
Hey Randy you do reefing videos also for bulk reef supply?
@At3tactical Жыл бұрын
Hey hey! You found me. I left BRS a bit over a year ago now, but I have to admit... I'm a bit more partial to guns.
@BFPLBigGeorgeCEO Жыл бұрын
This is some great information as I'm trying to decide on which hand graud should I got with and length with my M&P Sport II AR-15 ..... I'm thinking 13.5 in length but not so sure if I should get a free float or Quad Rail. And what's a great website? I've been looking at Primary Arms.
@762cat7 ай бұрын
Is it normal for a drop in mid length hand-guard to have some wiggle ?
@At3tactical7 ай бұрын
There is alway some wiggle with a drop in.
@762cat7 ай бұрын
@@At3tactical Okay thank you for your time sir
@afixedmindset43110 ай бұрын
Pick-uh-tin-ee ... killing me.
@At3tactical10 ай бұрын
😂
@Jackmanis10 ай бұрын
I tried to put a handgrab on my Handguard on my AR, but the mlok nuts where to small for the holes in my guard. So I need to replace the guard. Any recommendations?
@At3tactical9 ай бұрын
So M-lok is an industry standard size. If you are using products from reputable brands you should be fine. If you have any issues with AT3 products contact our customer service team.
@Jackmanis9 ай бұрын
Thank you for the reply. It looks like the original hand guard isn't made from mounting Anything. the holes are just there for aerating so I'm going to replace the hand guard@@At3tactical
@scotchancestry910320 күн бұрын
Hmmm fixed stock on a bolt gun, maybe it's just me
@Gospeed777 Жыл бұрын
What do you Rec for a sig m400?
@billsudduth63722 жыл бұрын
When you have a free float quad rail do you need to change the barrel nut out or can you keep the barrel nut you have for the quad rail
@At3tactical Жыл бұрын
Some manufacturers use proprietary barrel nuts for their free floats (Aero), which many times are not interchangeable with other brands. Our AT3 free float MLok and Quad Rails use the same barrel nut for both, which is most likely the same barrel nut for 80% or so of other brands.
@jmdelira872 жыл бұрын
So can you control these with the new Neptune apex;)
@sappysiggy23512 жыл бұрын
been looking to swap mine out, show me how, also want to remove the front sight post
@At3tactical2 жыл бұрын
We're working on that video in the near future! Got some M&P15 Upgrades coming first. ;)
@17_jager37 Жыл бұрын
Iam in a country where lasers etc. are not allowed Doesn't it make more sense for me to pick a shorter handguard - just for my grip and sling mount and leave it at that or is it a big difference for the handguard to cover the barrel from impacts?
@At3tactical Жыл бұрын
Most commonly folks install free float handguards that at least cover or come close to covering the gas block. I'd say even more commonly is to have the handguard nearly up to the muzzle device or a few inches back. I wouldn't worry too much about weight difference between shorter or longer, but there's a lot more you can do with that extra handguard space, even if you can't add lasers/lights. :)
@17_jager37 Жыл бұрын
@@At3tactical do you think it is important to cover the gas block?
@At3tactical Жыл бұрын
@@17_jager37 There's a right answer for both. Most who are using adjustable gas blocks are more likely to keep the gas block as close to the end of the handguard as possible, if not fully exposed. (Most commonly the first option.) As for the 80% of the rest of us, using non adjustable gas blocks...and not planning on throwing a suppressor on anytime soon...You'll find that the handguard covers the gas block completely, but not so far that you bury the gassy ports of your muzzle device. Just remember that if you do ever want to swap out your muzzle device, which is more likely to happen than anything else, you can choose to cover the wrench flats or not...if you do, you'll always have to take that handguard (and everything on it) OFF.
@thomasalamar82418 ай бұрын
New to guns. Owned firearms since April of 2022. However, I have lots of theory and not enough practice. I can easily sell being an expert on firearms, but I still consider myself a noob. I'm watching this video to learn more, especially since the ar15 I bought (model M15A4 by Armalite) has a free float smooth surface handguard. It's just for grabbing it with your hand and nothing more. Plus a super heavy 20-inch barrel I wanna get rid of. Over sized stock like the one on the M16 and a scope that I think is 3x magnification. It's horrible for indoor use if it ever comes down to it. So I am going to replace all of that.
@cleverhonky7186 Жыл бұрын
I need that closet
@charlescote83919 ай бұрын
My AR weighs over 10lbs with no magazine. No matter what...should it ?
@At3tactical9 ай бұрын
Well it depends on what you are looking to do with it. You will have very little felt recoil but it will be hard to carry for long distances. Travis built a 5lb AR in this video kzbin.info/www/bejne/hafCoaRno6-Sbs0
@some_cool_random_guy Жыл бұрын
thanks
@tomforeman49766 күн бұрын
The reall reason drop ins are so cheap there are many numbers of people going long range either hunting or competition target so free float only
@garylewis9762 жыл бұрын
Longer drop in rails are available on the market, I have one.
@At3tactical2 жыл бұрын
Definitely some awesome drop-ins out there, like that UTG Super Slim Drop-in! Such a great concept to get more room, but still keep the front sight post.
@garylewis9762 жыл бұрын
@@At3tactical I really like your companies products.
@At3tactical2 жыл бұрын
Thanks Gary. That means a lot.
@DirtyDirtbath8 ай бұрын
"At the end of the day they're just handguards" okay but what all companies make it without a full top rail? I've been using a BCA upper and prefer it over any other upper I've shot because it doesn't have a full rail on top and is easier for my infant hands to wrap around. What other companies making that style of upper?
@At3tactical8 ай бұрын
That is a great option. We like the STNGR VLCN® M-LOK Free Float AR-15 Handguard
@DirtyDirtbath8 ай бұрын
@At3tactical ill look into that, thank you for the recommendation!
@WhimsikАй бұрын
I lean toward quad rail for no reason other than that I refuse to give Magpul my money
@At3tacticalАй бұрын
Understandable, The M-Loc system is open source.
@specialk507011 ай бұрын
Geissele MK 4
@thebnbaldwin2 жыл бұрын
No mention of Key-Lok.
@At3tactical2 жыл бұрын
Thank! Yeah, we missed that. Ehh...oh well. PLENTY more videos coming down the road! We're just getting started.
@danielescobar7618 Жыл бұрын
You can't outspend your ability. If you can't hit targets with a drop in, a freefloat isn't changing that. I do so many changes for guys that hit the range less than once per quarter
@jacksonmarshallkramer5087 Жыл бұрын
Mlok and keymod rails are for 🌈 gucci fad guns. Combat guns, M4s, are issued with carbine length quad rails.
@bigmacfullerton7870 Жыл бұрын
I would guess you don’t use 🌈 civilian ammo either??? Just the much weaker military grade ammo since that’s what combat guns are issued with
@The_Real_JimmyG Жыл бұрын
Randy from BRS?
@specialk507010 ай бұрын
M-lok geissele MK 4 👍
@kariloveish4 ай бұрын
Why not talk about key mods, when you were mentioning it a lot?
@recoiler45452 жыл бұрын
Kinda glossed over keymod.
@At3tactical2 жыл бұрын
Yeah, saw that too. It's fine, TONS more videos coming in the future. I'm certain we'll cover all of them WAY more in-depth after the "Beginner Series". :)
@ingram07749 ай бұрын
Pickateenie lol
@At3tactical9 ай бұрын
😅 Dang northern midwestern accent.... LOL!
@brianfischer5609 Жыл бұрын
Free float really doesn't matter unless you're using your sling pulled tightly against your shoulders for stability.
@bigmacfullerton7870 Жыл бұрын
Free float makes your rifle more accurate no matter how you are shooting. Sling or no sling
@CompanyHaze3 ай бұрын
😂fucking too much deferentials
@Merrillizer Жыл бұрын
Lots of freemason shit here, huh?
@At3tactical Жыл бұрын
Not entirely sure what you mean, but...thanks for watching! 🙂
@Merrillizer Жыл бұрын
@@At3tactical lol, nah, you know what I'm talkin about
@Dirty2Clean19805 ай бұрын
Check.out bg deffence I prefer both the rails i usually get, have m lock in the middle and picatinny full bottom and top but two inch on the front and one inch pic on the back Best of both worlds, and they feel great when shooting.