In this video I roll paint the topside of the Cruise Craft with Norglass Northane 2 pack paint and achieve a near perfect finish.
Пікірлер: 62
@artyspostАй бұрын
NICE... a Land Rover Discovery and a Peugeot. Both my favs. I have a 96 D1 300tdi. Used to have a Peugeot 505. I'm also about to paint, but on aluminium.
@cheapthrillsgarageАй бұрын
The 205 will be my next project!
@GrooveyTuesday2 жыл бұрын
I’m about to paint my boat too. I’ve got white primer, but going to switch to grey for the exact same reason you mentioned. By the way, I recently replaced my transom using your tutorial as my main guide and very happy with the outcome! Cheers mate 👍🏼
@bruce.chloereid6090 Жыл бұрын
Thank you for taking the time to video this, I've learnt so much :)
@crawfordconnell43342 жыл бұрын
Nice job... looks awesome. Great detail as always ! 👌
@andrewwastney92282 жыл бұрын
hey looks awesome im really enjoying all of your posts! thanks for taking the time to share !
@garymcneil2216 Жыл бұрын
Great 👌 job on the boat. Came out quite nice. 👍
@thomasjones6852 жыл бұрын
love your work
@leepatton11802 жыл бұрын
Nice job
@AnarchyEnsues2 жыл бұрын
Dude, I know I've posted this comment before. Your tutorials are top notch. 👌
@cheapthrillsgarage2 жыл бұрын
Thanks mate!
@aquious9534 күн бұрын
I like the vertical then horizontal then another light vertical roll.
@imanenigma3348 Жыл бұрын
Thanks for the video mate. I have an old Mariner Pacer 780 sedan (26ft) 1976 model project boat. I would like to have a crack at painting her hull sides (dark blue)with brush/roller. Not looking for showroom but just a change of colour and to tidy her up. Appreciate your effort to give us all some clues and dare I say it, hope, that it can be done. Cheers mate.
@ezeebop8 ай бұрын
I did the first coat (same brand, same white), with foam rollers, around two months ago, on a day when Adelaide (noticed your plates) was unseasonably warm. Then it got cold and never quite got up to 23 again, at least not on a day when I didn't have something else on. Just preparing to do the second coat. Wish I saw this before I did the first coat. Anyway, better late than never.
@mariuslouw782 жыл бұрын
Possibly the rounded edges on the foam roller that’s creating a softer edge. I’m actually thinking of rolling on army paint on my disco so watching lots of roller painting videos. Initially thought that paint with hardner is a no go for rolling but doesn’t seem to be the case. Will be going matte or satin so the texture from a roller shouldn’t be a deal breaker. Sweet D1. 🤘🏻
@bonggoblin2473 Жыл бұрын
Legend
@dancoope2562 жыл бұрын
Great video, just about to paint bathroom tiles with it!! What size foam nap did you use? Have bought mohair naps like they recommend but will try foam ones out first!!
@aquious9534 күн бұрын
I've read its a good idea to change the foam roller every 5 min.
@PeteGags15 ай бұрын
Hi mate, good work. Where did you purchase the Pro Roller co high density foam rollers? Australia. Thanks
@gatecrasher19706 ай бұрын
am going to do this with my snapdragon 24 foot yacht seems a no brainer lol
@crispernator2 жыл бұрын
gday mate did you actually tip this paint or just roll ? im just about to paint my boat and was going to roll and tip as ive seen some pretty good results looks like a pretty good job ok never going to be perfect but your not in a booth and your not using a gun so looks good to me and ive done three restos but they were sprayed .
@tony7830Ай бұрын
For the second top coat, no light sand , just the nor-clean. Is that right ? And top job.
@cheapthrillsgarageАй бұрын
As long as you apply the additional coat in 24 hours no sand is required. I recommend 3 coats instead of 2, there was a few dark patches of primer you can see through in the light with 2 coats.
@user-hg2pi8sf5q4 ай бұрын
Hey mate great job, where did you get the paint from. Cheers
@cheapthrillsgarage4 ай бұрын
Road tech marine, or Inspirations Paints
@shepss217 Жыл бұрын
Could this possibly be wetsanded afterwards and polished out for an even more flat look?
@cheapthrillsgarage Жыл бұрын
I wouldn’t, too much risk rubbing through it.
@malcolmyoungacdc Жыл бұрын
Is that qcell you used to finish the holes good for below the waterline or would you use flowcoat for that?
@cheapthrillsgarage Жыл бұрын
I think you'd be fine with it
@geoffstein38962 жыл бұрын
Hey mate, love your work appreciate your chanel but do you ignore the comments on your videos? You never seem to reply. Would love to know where you got your boating repair knowledge from.
@allandriver20662 жыл бұрын
Microfibre works best...but you need to roll-off your final stroke.....all strokes finished in the same direction. 👍🇭🇲
@H3K7K4 ай бұрын
Gday mate, what’s the sealer you’re using in the first section?
@cheapthrillsgarage4 ай бұрын
As in the filler for the holes? Cab-o-sil and fibreglass resin.
@paulbriggs3072 Жыл бұрын
I will take note about the foam roller producing a smoother finish. I wonder if tipping off with a foam brush would make a smoother finish even still.
@cheapthrillsgarage Жыл бұрын
Haven’t tried tipping, but I now use these rollers that don’t break down with the solvents in 2k and give a better finish again. proroller.com/product/high-density-foammini-rollers/
@paulbriggs3072 Жыл бұрын
@@cheapthrillsgarage Thank-you.
@bashaz85597 ай бұрын
Mate- THANKS! I'm preparing for the same thing on an old Haines, for above and below waterline. Below waterline had 3 layers of paint used a 36grit Alu disc then stripping disc. I've got limited shelter for her and was going to do this outside but will see.. Guy at the shop -not norglass- suggested a sand between TOP COAT layers as it wouldn't stick otherwise- that's not suggested on the Datasheet. How much thinner on your second coat? Cheers this is so helpful
@cheapthrillsgarage7 ай бұрын
I didn't go any thinner on the second top coat. Just make sure you apply each successive coat within 24 hours and you won't need to sand it. I did 2 coats, doing it again I would do 3.
@bashaz85597 ай бұрын
Awesome thanks so much man
@bashaz85597 ай бұрын
Is it a forgiving primer, do scratches disappear? Also would you think I even get away without sanding after the 2nd primer coat if I continue with topcoat within 24 hours? That would be too good to be true;-)
@cheapthrillsgarage7 ай бұрын
@@bashaz8559 When the primer goes on it’s looks shit and and had heaps of orange peel. As soon as you sand the primer, all the scratches and irregularities disappear. I’d definitely sand the primer, it’ll make the top coat look good.
@bashaz85597 ай бұрын
Yep thought so thanks again this really helped so much !
@mtbsnowymountains-2702 Жыл бұрын
Hey buddy Great vid how much paint did you use?
@cheapthrillsgarage Жыл бұрын
2L of each from memory with a bit leftover which was 2 coats of primer and 2 coats of top coat. Doing it again I would done 3 of each. I once did a full boat, top and bottom hull with 4L spot on.
@craigpoodle1188 ай бұрын
where did you buy the ratio cups ?
@cheapthrillsgarage8 ай бұрын
Amazon or Ebay
@mayboi248 ай бұрын
Could you use a spray gun to apply the paint ?
@cheapthrillsgarage8 ай бұрын
Unless you are a professional with a booth, I'd bet you will end up with runs and heaps of dust blasted into the paint. I tried spraying my last boat, that is why I rolled this one.
@mesittingduck Жыл бұрын
The foam roller disintegrates with the top coat. You need to change rollers as you go.
@cheapthrillsgarage Жыл бұрын
It sure does, hard to find one that last for long at all. I went through about 12.
@gaycha6589 Жыл бұрын
Loving that 205 gti tucked away there.
@cheapthrillsgarage Жыл бұрын
It’s the next project 😎
@gaycha6589 Жыл бұрын
@@cheapthrillsgarage sweet. I had both a 1.6 and then a 1.9 back in the day. Classics now. Will sub and wait to watch project. Thanks.
@tomjulien31532 жыл бұрын
Think the paint ate up the foam roller.
@tomjulien31532 жыл бұрын
maybe bin them between refills of paint.
@adl2005 Жыл бұрын
Keep changing the foam roller because it starts to melt and break down