EPever MPPT charge controller PC connection parameter settings and low temp disconnect

Sorry about the audio. I didn't plug in my external mic.
Affiliate links:
Amazon
EPever 20a charge controller
👉amzn.to/37BRW5i
Temperature Sensor RTS & Monitoring Adapter
👉amzn.to/3K6V8mU
➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖
Recommended Online Store For Solar Equipment.
Signature Solar
👉signaturesolar.com/?ref=Roll2
Practical Preppers Store
👉bit.ly/PracticalPreppersStore
➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖
Contact info: 📧 [e-mail] 📧
I'm not available for consultation or personal project advice.
➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖
🛑I (Roll2Videos) want to clarify that this channel's content is created for entertainment and informational purposes. Some activities featured in our videos may be performed by trained professionals and should not be attempted without proper expertise, supervision, and safety precautions.
By watching my content, you agree that you understand the risks associated with any actions demonstrated in the videos. I strongly discourage attempting to replicate any activities or actions you see on this channel without seeking professional guidance and ensuring your safety.
Please note that I cannot be held responsible for any injuries, damages, or adverse consequences that may occur if you decide to replicate, imitate, or participate in activities demonstrated in my videos.
Your safety is paramount to me, and I encourage responsible decision-making when engaging in any activities inspired by our content. If you have any safety concerns, always seek expert advice and take appropriate precautions🛑 #lifepo4 #solar #solar #battery

[@Roll2Videos]

Recommended Online Stores For Solar Equipment. Practical Preppers Store 👉bit.ly/PracticalPreppersStore Watts247 👉watts247.com/?wpam_id=102 Current Connected 👉currentconnected.com/?ref=roll2videos

[@JeffSkymaster]

Thanks for the rundown on the charge controller. Enjoy your videos!

[@Roll2Videos]

You're welcome

[@dumindacooray]

Saved my day!

[@Roll2Videos]

Have a great day 👍

[@northerncaptain855]

Thanks for the helpful video.

[@Roll2Videos]

My pleasure

[@adelgc]

Hi I have tracer Bpl 2606 and 3906 How can I set the charging current from PV or DC input.

[@Roll2Videos]

I'm not sure that you can set that. Next time I'm playing with my EPever I'll check it out. 👍

[@kletusbobby7029]

That was helpful thank you. I have 2 epever solar charge controllers. How do monitor both at the same time?

[@Roll2Videos]

Your welcome. You'd have to have 2 computers for each

[@rollinronin8125]

I have 3 controllers and wonder if the software is set up for multi controller monitoring. Adam Welch on youtube does a lot of epeveri stuff. Fyi.

[@Roll2Videos]

@@rollinronin8125 if you find away let me know. The only way I can think of is if you had multiple ethernet ports for each controller or plug in a single unit at a time to monitor.

[@Roll2Videos]

@@rollinronin8125 Adam is great, One of the first channels I watched when I was starting out.

[@BobBob-il2ku]

If I select lifepo4 8s can I modify the low temp cutoff with the mt-50 screen or do I have to hook it up to a computer with the usb cable?

[@Roll2Videos]

Pretty sure you'd have to hook up the USB.

[@Zack-es3eb]

Great tutorial, I am going to order a cable too, but it will take 2 weeks to come, can you please let me know if it can be set the maximum amp/volt or watt limit for PV ? I want to connect the mppt to my car when I am on the road, but I do not want to get more then 300-400w instead of the 520w for the 12v setup .... Can those parameters for PV input to be changed ? Thank you in advance ......

[@Roll2Videos]

I would not recommend connecting the PV port to your alternator. They do not reference this in the manual.

[@Roll2Videos]

Also I don't think the alternator would make the minimum voltage required. 20% above your battery voltage is ideal for a MPPT charge controller. Look for a DC to DC charger. Renagy and victron sell them.

[@alicegroser4310]

hi what does peak power mean on the station information screen? What's the difference between that and total peak power? Thanks!

[@Roll2Videos]

Peak power is just an estimate of the total amount you will be producing from solar. Really these numbers mean nothing to the charge controller. Just stay within the maximum parameters of the unit and you'll be good 👍

[@chuksfrank4975]

Nice video. Can I use the windows software on a laptop to programme up to 5 different units of EPEVER Tracer 10415AN charge controller for Lithium ion battery (LiFePO4)?

[@Roll2Videos]

Yes you can. You'd have to program them one by one. Who is the manufacturer of your batteries?

[@chuksfrank4975]

Thanks so much for your reply. I plan to try programming the charge controllers with an MT50 by this weekend. I have tried to programme them with the windows software but the solar station software can not dictate/read any of the charge controller. I don't know if it's an aftermarket cable problem like you mentioned in the video. The Battery brand is Felicity Solar (A Chinese brand).

[@Roll2Videos]

@@chuksfrank4975 I'm sure it's the cable. Also don't forget to check that the RS-485 is selected. Thank you for the battery name I'll see if they can send me a batter for review 👍😁 good luck let me know if it works

[@chuksfrank4975]

@@Roll2Videos Alright......thanks.

[@Roll2Videos]

@@chuksfrank4975 Anytime 😁

[@pierrewendyluxama3682]

So I can use this program on my pc or buying a MT 50?

[@Roll2Videos]

You can use the program just with the usb

[@user-cq7lt4lq6x]

Sir, How come power output to battery is bigger than input power from solar?

[@Roll2Videos]

I'm guessing your looking at the amps? For energy you always want to look at the watts. Forget about amps and amp hours watts and watt hours is how to understand power. There is low amps on the PV side because the voltage is higher. The amps are higher on the battery side because the charge controller converted it.

[@boscodog4358]

I have Epever 6415an can you tell me which port to plug the RTS into . I have 4 0ptions on mine

[@Roll2Videos]

I do not know, Check the manual.

[@boscodog4358]

Hey Roll2 The manual does not say. Thanks man 👨.

[@Roll2Videos]

@@boscodog4358 Sorry I can't help you

[@BobBob-il2ku]

Does the BN series have low temp cutoff specifically the 4215BN ?

[@Roll2Videos]

I'm not sure, I don't have one.

[@David-kd7vl]

Can you fit more than one temp sensor to a epever control

[@Roll2Videos]

No unfortunately you can not.

[@David-kd7vl]

@@Roll2Videos thank you sir.

[@BobBob-il2ku]

What would my settings be for two 12v 100ah lifepo4 wired in series for 24v ?

[@Roll2Videos]

If you are using LiFePO4 batteries, Chick and write down the settings for the 12V LiFePO4 battery, then go to the user setting and double all the values.

[@joeo8396]

Where can I buy the CC-USB-RS485-150U PC Communication Cable? I live in the USA.

[@Roll2Videos]

Have you tried Amazon or AliExpress?

[@joeo8396]

I see them on amazon, do they work correctly? I see reviews that they are having problems with pc software.

[@01581Cody]

Can I hook up 24 volt panels and set controller for 12 volt output for my battery?

[@Roll2Videos]

There is no such thing as a 24V panel. You can hook up to 92 VOC. To charge a 12 or 24-volt battery

[@01581Cody]

Thank you so much for taking the time to help me!

[@Roll2Videos]

@@01581Cody I should make more videos in this area to try and help people out

[@01581Cody]

So pretty much the VOC is what I have to keep an eye on when purchasing solar panels for my 100 V controller, correct?

[@Roll2Videos]

@@01581Cody yes if you run your panels in series. Amps if you run them in parallel

[@BobBob-il2ku]

Do I have to have a 12v or 24v battery hooked up to program the controller?

[@Roll2Videos]

Yes, The charge controller will need power.

[@JournalForex]

get me using the software reset the total generated energy ?

[@Roll2Videos]

I'm not sure what your question is?

[@life_in_the_holler5703]

Could you possibly go over the generator/utility relay connection stuff?

[@Roll2Videos]

In my mobile power station video I cover it

[@mickeybrumfield764]

Do you know how well the Bluetooth connection on Android works. The reviews on Amazon for the Bluetooth adapter are terrible. They say the software doesn't work well. Just wondering what your experience was? I have a Epever Tracer 20 Amp model and there are no settings for Lifepo4 batteries on the controller. It has to be set externally with an adapter or cable. Would like to go with Bluetooth if it works properly.

[@Roll2Videos]

I've used the bluetooth but only while I was right in front of it. Can't say about the distance

[@mickeybrumfield764]

@Roll2Videos People seem to be complaining about the android app not working on Amazon and the Google Play Store.

[@Roll2Videos]

@@mickeybrumfield764 It has been a year since I've used it but when I did I never had an issue. Maybe they ordered the wifi one and not the Bluetooth one 🤷

[@razorsharpbt124]

I've tried the WiFi box and the USB cord with no luck. The cord will sometimes work for a minute or two but then it stops working saying it's timed out. EPEVER will not respond to my pleas for assistance. It's frustrating to say the least.

[@Roll2Videos]

Have you tried following my video maybe on a different PC?

[@razorsharpbt124]

@@Roll2Videos Yes, I tried a different PC with the same results. It's hit or miss.

[@Roll2Videos]

@@razorsharpbt124 Man that sucks. I'm sorry my vid didn't help you

[@razorsharpbt124]

@@Roll2Videos It's ok. Thanks!

[@lukasoffen2420]

if it doesnt work: May need to install additional driver in Windows Updates

[@carolinecrona2481]

Is online configuation available for all epever tracer charge controllers?

[@Roll2Videos]

No not all, Youll have to look at the details of what you want to buy.

[@googeliswiththegreys]

Video is good, some parts were blurry, some moved too quick but compared to the chinese one, I could at least understand this. The charge controller is not the best due to the complexity of getting it to work. You need to buy all the cords, extra stuff and more extra stuff, you need to have internet, you need to download apps and all this makes it very complicated. I don't have wifi out at the end of my driveway so I had to hot spot my phone, my computer battery, made in china, also did not last long enough to watch both whole videos. This has been the worst purchase I have made and I definitely regret it. Almost every video is 12V and none are 48V which is all I would get as I am using appliances and need power for tools, fridge and the like. I also am using Li-NCM due to high humidity in FL. I need to have high heat settings not low temp settings. This was not explained so the video is not going to cut it for everyone just northerners using 12 volt.

[@Roll2Videos]

I hear ya buddy. All the 12v settings you can scale up by x4. The high heat settings are in the same page as the low temp settings easy to find. Good luck with your projects 👍 The wife wants to move to FL if things continue on the same path in Canada. 🍻

[@herbertvonsauerkrautunterh2513]

This shit doesn't work in windows 11. I'm over it

[@Roll2Videos]

Did you enable RS484 in the device manager?

[@herbertvonsauerkrautunterh2513]

There's no check box for that unfortunately.

[@Roll2Videos]

@@herbertvonsauerkrautunterh2513 That is strange

[@herbertvonsauerkrautunterh2513]

@@Roll2Videos I'm not liking win 11