EPEVER XTRA-N G3 (10~40A) MPPT Solar Charge Controller | Unboxing & Comprehensive Setup Guide

[@FixTechStuff]

Looks very well designed, the built in bluetooth module is a great idea.

[@Epever]

Thank you for your feedback! We're glad you like it. Stay tuned for more updates and features!

[@FreeGeoable]

Do you plan to release software updates for the previous version of devices with instructions on how to do it? Can you implement remote updates, e.g. via Solar Guardian? I have xtra 4215n

[@DigitalMind.254]

App is not so good like Victron and renogy

[@Epever]

Hello there, it's possible to update the device's software, but currently, there's no remote update feature available. You'll need to connect the controller to a computer using the CC-USB-RS485-150U cable and update it with the update package. Please take a photo of the label on the controller and send it to [e-mail]. We'll check if the device's version supports updates. Thank you.

[@Epever]

Thank you for your feedback! We appreciate your input and are constantly working to improve our app. If you have any specific suggestions for improvement, we'd love to hear them. Please send them to our Software Development Department at [e-mail]. Thanks again for sharing your thoughts!@@DigitalMind.254

[@DigitalMind.254]

Only one change and that is Bluetooth connectivity. Epever should have work on to increase the capacity as well. No body will replace old xtra 40A with new 40A g3

[@Epever]

Hello there, thank you for taking the time to share your thoughts with us! We truly value your feedback, and we'll consider your suggestion as we continue to improve our products.

[@imampetrix]

Hello, I am an Epever user, can 2 Epever XTRA-N G3 series be connected in parallel to charge 1 battery?

[@Epever]

Hello there, thank you for choosing our EPEVER products. Please don't connect two XTRA-N G3 charge controllers in parallel as that may damage the controller.

[@NandoSom94772351]

Show 😁👍

[@Epever]

Thanks! Glad you like it!

[@NandoSom94772351]

@@Epever Here in Brazil, EPEVER equipment sells a lot, Brazilians like it.

[@M.Abdullah0002]

What a nice product. But 20 Amp is too minimum. Maximum12/24 volt and 60 or 100 Amp are best spec's

[@Epever]

Thank you for your feedback! We're really glad you like our product. The video features the XTRA2206N G3 BLE model. For more info on the XTRA-N G3 Series (10-40A), please visit our website: www.epever.com/product/xtra-n-g3-mppt-charge-controller/. Our Tracer AN Series (50-100A) MPPT Charge Controller may suit higher current needs: www.epever.com/product/tracer-an-50-100a-mppt-charge-controller/. Your input is valuable and we're committed to improving. Feel free to reach out with questions or suggestions. Thanks again for your interest!

[@syedaliraza5463]

mobile number kya hai