EPI Clutch Kit Install - 2022 Polaris Sportsman 570 Ultimate Trail

How I installed the EPI clutch kit. Good results, great performance, easy install.

[@sandman25654]

I have a 2022 Polaris Sportsman 570 SP Trail with EBS and it looks similar to yours. After I take the 60 mm bolt, the PCP 25 doesn't fit, it's way too big. As you didn't show how you removed the clutch, I'm not sure what step I'm missing. Also, I also live in MN. I see you've been to Spider Lake. Have you checked out Gilbert, or Martieau? Also pretty good trails.

[@felixreyes3456]

I have the same quad bike

[@J_TRAIN]

Man I’m tempted to try it myself but I never messed with a clutch before.

[@user-rm7lw9lj6x]

hey man youre the first person who i have seen take apart this new style of clutch. I have the exact same setup and every video out there is for the old clutches. My only question is if the helix is charged meaning do you have to do a half a turn on it before you put the other side screw it down or it just spring loaded

[@GopherOffroad]

No I believe you don’t have to do that like the old style…. I did that on my older one (which I showed in the video and I know exactly what your taking about.) I just compressed it normally and had good results. Hope that helps.

[@borisbucifal5596]

Hi, I upgraded the clutch like you, with a brown damper, the only thing I'm interested in is which one has a better effect on the belt, brown or black damper. Now the belt should have a longer life.

[@GopherOffroad]

The lower engagement spring (black) would have better wear and tear results on the belt. However, i have had little to no trouble with thousands of miles on the OE Polaris belts.

[@nombr]

Good video man! I’m currently putting together my secondary and can’t get the sheave to stay centered as I tighten it down to the helix/spring. Any tips for me? I am using a compression tool from EPI

[@GopherOffroad]

Thank! Not really sure on any tips just trial and error I guess. Try to keep lined up the best you can while compressing. Good luck! You’ll get her!

[@JohnnyEspinoza-vc2do]

Is this clutch kit for mud or for trails ? I know EPI makes 3 different ones depending what your riding style is

[@GopherOffroad]

This is the trail one or I called it sport utility

[@felixreyes3456]

Where can I buy it???

[@felixreyes3456]

I can not find it

[@justinlawrence4391]

I know this video is a few months old but do you need to realign your clutch’s after pulling them

[@brandonblanchard1005]

Your clutches are balanced and putting them back together wrong would possibly unbalance it. I don’t know what bad would happen but it’s best to keep them balanced.

[@GopherOffroad]

Balancing and alignment are two different things as commented below. You should not need to align your clutches as long as you put them back as you took them off. I mentioned in the video you may have washers behind your secondary that you want to keep the exact same order for alignment purposes.

[@GopherOffroad]

He's asking about clutch aligning not balancing. @@brandonblanchard1005