Me attempting to run a long reach excavator on deere controls until the mechanic came to switch them
Пікірлер: 303
@nardp966 жыл бұрын
I always have preferred Deere, probably because that's what I learned on. In my mind i consider the stick and bucket one unit, so having it on the same hand makes more sense to me. I've run cat Controls I have to apologize to the machine when I'm done lol
@grumpyscout47452 жыл бұрын
After watching a ton of your other videos. This one was freaking hilarious.
@jimmymcdonald-jones61328 жыл бұрын
hahahaha you are one of the best operators ive seen, so watching you bunny hop that bucket had me in tears. Reminded me of the first time i tried to use a backhoe. You just cant be smooth when your brain is trying to tell you its backwards.
@constructionduru51952 жыл бұрын
Watching you stumble your way through makes me feel A LOT BETTER... Joined a new company whose machines are all CAT controls. It's been extremely embarrassing/frustrating trying to convert back to CAT controls. After having to learn deere controls and running it for over 10yrs with the last company I was with! 🤬🤬🤬🤬
@leonblittle2263 жыл бұрын
Watching a decade later on this is damn funny - you have mellowed alot since this.
@boostfed86 Жыл бұрын
Ran across this today. This was the best laugh I’ve had in a long time. After watching recent years videos vs this, I was dying😂
@zacktexley9537 жыл бұрын
"I should get you some good videos..Oh hell, here we go...God almighty damn"!!! Hahahaha. Going through some of your old videos and they never get old and get more funny as I watch.
@MrTheoutdoorsman11238 жыл бұрын
this video made it on my favorites list lmfao I feel your pain dude I run the controls like u hate getting into a backwards machine
@Bigitaly578 жыл бұрын
Buffalo ny. loves watching your videos. this one had me laughing so hard!!!!
@716racingchannel6 жыл бұрын
North Tonawanda NY Loves them To Keep up the great work
@KoczkodanPL7 жыл бұрын
I can imagine the laughs they had at the standards meeting when they made SAE, ISO and X/X (jcb) control systems for the excavators... You worked 10yrs using SAE? Hey try ISO, its fun :D
@bendriscoll70403 жыл бұрын
I had the privilege of getting shown both patterns
@jpa12823 жыл бұрын
@@bendriscoll7040 doesn't mean your good at both
@bendriscoll70403 жыл бұрын
@@jpa1282 u don't have to be
@erikcourtney18342 жыл бұрын
Yeah I’m not good at all with SAE. I can do it but I’m stressed and pissed the whole time. Been running iso for 26 years or so. It just feels more natural.
@Silverhornet812 жыл бұрын
This popped up after watching your newer videos for 3-4 years.. I couldn't stop laughing!!
@devin1976019 жыл бұрын
I have a Kubota that has both types. I switched it over once for shits and giggles . it was like being totally drunk behind the stick. not a good feeling but funny as hell as long as your not trying to make production lol
@codyralston25764 жыл бұрын
The excavation company I started with ran all John Deere controls then I moved to a company ran all cat controls the most frustrating 3 hours of my God damn life
@lborate35433 жыл бұрын
This is my favorite ld18 video ever
@1483samurai10 жыл бұрын
Under the rubber foot mat there is a 3/4 in. bolt valve to turn the machine from John Deere controls to Cat controls or SAE. Almost all excavators have that switch over position.
@queenofspadz8 жыл бұрын
+1483samurai not all machines come with 2 or 4 way valves. The 324 I was in today didn't have a switching valve (and wasn't in the computer either). Had to suck it up and run ASE for the first time ever. Took a little getting used to but I finally got the hang of it.
@audreywilt56084 жыл бұрын
After watching so many of your videos... coming back to the past... OMG I'm crackin' up laughing at this video. Keep on Smilin' n cussin'
@Drew67097 жыл бұрын
I used to hate JD controls, but now I love that pattern. it makes more sense to me. I can operate CAT controls, but it takes me a while to get the reversed pattern down.
@NZDIRT13 жыл бұрын
the controlls you are use to are switched over, so boom up, boom down, bucked in and out are on the left lever and the others are on the right lever
@smart504711 жыл бұрын
"Chris, you're not supposed to put it back in the water!" Best line ever.
@green-zone363 жыл бұрын
That will make for a hard tiring day. My brain would be fried after 2 hours of that.
@OHIOPATRIOT755 жыл бұрын
Next time , let me know, I also prefer JD controls, bucket and stick on same control lever and boom and swing. I'll drive down and help...lol I look just like you trying to run friggin CAT controls
@artist45812 жыл бұрын
i was taught how to operate in the army. the army uses deer controls...
@alan.macrae3 жыл бұрын
Finally got to see you ride a bronco that gave you a little challenge!
@pjs519113 жыл бұрын
Sorry for your struggles Chris but the bright side is it made for an interesting, entertaining video.
@johnnyeburnette7 жыл бұрын
BWaahahahaha!...I love it!!....throws in a string of cuss words and never misses a beat commentating...you are multi-talented....I laughed my ass off and rewound this shit 20 times
@johntelger50455 жыл бұрын
Love your videos but man this one had me cracking up. Thanks for the laugh! 😂
@TrailTrackers5 жыл бұрын
This is like trying to wipe your ass with your left hand after you've wiped it with your right for 50 years.
@billmoran38127 жыл бұрын
It doesn't seem like a big deal, but when you run an excavator, you don't think of what control to use, you just watch the bucket and move it where you want it. I got in a cat 325 once that had the controls switched. Didn't know there was a switch to change the controls to "normal"
@Andy68gto11 жыл бұрын
For those that do not understand this......try switching the gas and brake pedal in your car.....
@TheBrushcutter6 жыл бұрын
Andy68gto yeah, or put someone who has never driven anything other than an automatic in a vehicle with 3on the tree. Not quite the same but still fun to watch. I once had a powerful Chevy Luv 4x4 that I switched the shifter and selector knobs on. I was amazed at how many people that threw off track. LMAO
@TonyGeneseo5 жыл бұрын
Occasionally I go back through the archives and watch an older video. Gooood lord u had me blowin snot bubbles I was laughing so hard at ur cussing and frustration!!! I'm a deere fan and appreciate most equipment you can change the controls but when u cant good lord it makes me feel like I hit myself in the head w my own bucket and no one to blame my own dumb self !! Lol. Love all the new pond vids and definitely appreciate you and all that you share w all of us Yahoo's:)
@P1cwh0r313 жыл бұрын
I spent more time looking at your rear view mirror at the gap between the dirt and your tracks than what you were actually doing. Keep it up, love the vids!
@anthonykovacic8005 жыл бұрын
I can run both but I prefer Deere
@kregschlautman6 жыл бұрын
I seriously laughed my ass off the whole time, but ik how aggravating it actually is that’s what makes it so hilarious!
@tomrizzo15546 жыл бұрын
I can't believe there's not a valve somewhere to switch the pattern like most machines
@letsdig1813 жыл бұрын
@freeskakel I can pull off deere controls on a standard machine but the long reach through a curve to it, I had to have them switched to cat LOL
@dacodapowell57186 жыл бұрын
Hihihihihihi lol
@dacodapowell57186 жыл бұрын
letsdig18 hi
@brettmyers47148 жыл бұрын
haha i feel your pain..a mate who i wrk with always changes the control pattern when his on it i jump on and nearly push the machine over trying to boom up :) love your videos man keep up the good work
@Ben_SC2 жыл бұрын
I run cat controls so I look the same way when I run Deere controls I feel your pain but I'm dying the video 😂
@rjvalentini2 жыл бұрын
I'm a plumber who operates backhoes for underground plumbing and when we switched to mini excavators I could not work the CAT controls at all until I found the switch. I wonder if the bigger excavators have a control switch I would love to operate a big excavator
@stevetouchdownsmith9 жыл бұрын
What you should have rented is an excavator with pontoon tracks on it
@UncleKennysPlace5 жыл бұрын
That reminds me of the first few hours running my backhoe! Now I don't even think about it, but there's no way I'd want to switch to another setup (mine's SAE.) It occurs to me that one could "cross their arms" and get better results.
@UpcomingJedi12 жыл бұрын
What a fun job! Gets to play with mud and dirt and makes money doing it.
@bondjamesbond11513 жыл бұрын
This so funny because I just had the same thing happen to me its very hard to switch from what your used to you have to think about every move you make and go slow
@generationstationdj11 жыл бұрын
Valid question. Though similar, Deere controls have the same features EXCEPT Instead of the Boom up/down being on the right side (and stick out/in on left) it's vise-versa. Some excavators offer both, some don't. I personally have learned on Deere controls (unfortunantly) and so when I hopped into the cab of a Cat 320B the other day It was quite a day. lol.
@hvy1ton13 жыл бұрын
Of course the controls are backwards on a long reach. Makes perfect sense.
@andrewbrenneman95928 жыл бұрын
We should get you a machine with Northwest control pattern. THAT WILL REALLY GET YOU GOING. LOL. If I remember right, it has a right hand swing.
@farmkid90287 жыл бұрын
Andrew Brenneman that's what they call cat controls
@andrewbrenneman95927 жыл бұрын
I know cat & jd controls. The ONLY difference is the crowd & boom. My dad ran a machine briefly that had Northwest controls. He hated it after running Cat controls for so many years.
@samcookson10296 жыл бұрын
Lmao. I know how you feel. I grew up running john deere controls. I've been running cat the last 8 years. Last time I tried jd controls it was like speaking Chinese.
@tracykluttz42973 жыл бұрын
Sorry your pissed but this is one of your funniest ones.
@samuel_towle5 жыл бұрын
Love it, best video so far. That is how I would be running that machine.
@4thgradedropout9807 жыл бұрын
I like jd controls.
@letsdig1813 жыл бұрын
@Cat314DLCR the boom control and stick controls are on different levers
@SWC447 жыл бұрын
I Fee for Ya.. I bought a Hannix,Mini and it had Chines Set Controls!!!!!! Finally found the Adjustment handle,, No factory help,unless I spoke Chinese,,Great Machine in Long Run! TY
@ebuzek36486 жыл бұрын
That Kobelco has a valve in the back hydraulic compartment that you can switch over. I ran a 210 that had it.
@MrDaniel31056 жыл бұрын
Those 2 different controls make a big difference
@fallsiedigsit6 жыл бұрын
pretty damn good for jd controls, man. really damn good.
@kissoma13 жыл бұрын
Good 3D effects, I thought one bucket was coming in the cab with us.. lol
@lastfanstanding9996 жыл бұрын
ya'll see that 4lbs Bass flippin around inside the bucket... lol :D
@HUnazifighter4 жыл бұрын
I have always run John Deere controls, so I enjoyed watching the backwards shows but I know it is the same for me when I run cat controls
@shawnjerome85996 жыл бұрын
I almost pissed myself laughing, great video
@flipper4545 жыл бұрын
That’s the funniest thing i have ever seen in my entire life. I laughed 6:39. I am crying. I know the pain. When you started going really fast that had me dead man. Holy shit that was a good one
@carol-annemartin4014 жыл бұрын
this machine needs a couple of zanex in the gaz tank lol
@brianfonsen73845 жыл бұрын
U need a rake for the grass. I can switch over to jd controlls but only on wable sticks fairly quick like minutes. Pilot controlls not so fast muscle memory takes over. I enterviewd on a jd 410 one time with a compaction wheel with pilot controls on BHL. I looked real silly. Lol
@Craneman4100w7 жыл бұрын
I know its an old video but I feel your pain brother. The damn Gradalls are even worse.
@arkansasjournal23699 жыл бұрын
I have thought about trying to find an Excavator job but don't even know where too look for one.
@emsim306 жыл бұрын
LOL! Been there...Where'd the stick go? (look way up) Oh, there it is...
@dennisleadbetter77214 жыл бұрын
It's good to see even good operators have off days. Makes me feel not so bad as a learner - getting all those moves together to look so smooth requires considerable concentration. What do you normally use, SAE or ISO? Doesn't it have the capacity to change it over? You gave us all lots of laughs.
@1toomanyhobbies13 жыл бұрын
wow, Chris is human after all and curses at the controls! :P
@LoggerWade7 жыл бұрын
Hahaha!!!! You sound like logger wade!!!
@ronc29464 жыл бұрын
Couldn't stop laughing 🤣
@copperheadmarine13 жыл бұрын
The long reach up there at the Meekins auction was ISO as well remember?
@letsdig1813 жыл бұрын
@MegaAnt111 there was not one, mechanic had to swap the hoses
@Direwolf5611 жыл бұрын
Turn the tracks from = to || so you won't be on a rocking horse. It'll take longer to change spots, but will be worth it.
@MinnesotaEric6 жыл бұрын
If you run a loader, then Deere controls make sense. Meanwhile you could just hit the pattern changer and be done with it.
@tylerburgess180511 жыл бұрын
I'm workin on a little pond now with a leibherr with cat controls, Cat controls make so much more since
@baker933043 жыл бұрын
That was hilarious!!
@drakejagminas69048 жыл бұрын
lol this is exactly how I feel running deere controls
@michaellee43897 жыл бұрын
That's how I feel when I have to run our 953 track loader
@dicin2913 жыл бұрын
if i was in the same situation with cat controlls i would be just like that
@scottsibbick5665 жыл бұрын
LOL, that's exactly how I feel when I run Cat controls :)
@robby84413 жыл бұрын
-shakes head and walks away-
@Rusty0234511 жыл бұрын
You'd think they would add a few extra weights on it for long reach duties
@Ghostwolf1000013 жыл бұрын
haha. Chris looks like you're haven so much fun lmao
@globalearthworks13 жыл бұрын
i have had to switch from excavator controls to backhoe controls before and it is ridiculously hard to change
@tylerschlichting26367 жыл бұрын
love deere controls
@bigdan4532213 жыл бұрын
Ha ha ha you made my day chris you going to dredge that pond or skim it lol
@dennisbarr52936 жыл бұрын
JD pattern only. Too old to change 👍
@TacticalMainframe4 жыл бұрын
That bouncing looks like it hurts.
@zeldakoons36864 жыл бұрын
LOL LOL LOL LOL LOL LOL, tears and coughing!!!!
@6771Randy10 жыл бұрын
LOL! Try running an old backhoe with 3 or four sticks. I learned on JD controls and can sympathies.
@billmoran38127 жыл бұрын
6771Randy I had an old Ford 555 backhoe with 4 lever controls. I remember my daughter asking how I ran it with two sticks in each hand. Had to say I never thought about it. Just became automatic. Funny to watch a guy on it who only had a two stick machine!
@6771Randy7 жыл бұрын
LOL! That funny guy was me at one time.
@thill25706 жыл бұрын
I hope that machine has a seat belt that is a rough ride
@chrisatha45959 жыл бұрын
Ive never seen a arm that long before
@romangavrilov9309 жыл бұрын
+chris atha It's a long reach for pond/ditch cleaning (light duty)
@chrisatha45959 жыл бұрын
+Roman Gavrilov yeah they must be really useful
@oBseSsIoNPC7 жыл бұрын
Would have been a better video if you had explained what is backwards here...what's the difference?
@robinyates942611 жыл бұрын
JCB is,, left stick boom and slew,,,right stick dipper and bucket, foot pedal extender in and out
@landserviceco.60567 жыл бұрын
That shit will make you tired
@dudewicket515012 жыл бұрын
lol been there only its when its not JD controls for me makes you feel like an idiot for a normally competent operator ...thanks for the vids From Canada
@Vaedon-x5o11 ай бұрын
Have u ever scooped up a snake or alligator?
@MarkRambo13 жыл бұрын
Good video..
@jimlondon16 жыл бұрын
wait until you try JCBs X Pattern backhoe levers. they take some getting used to but when you master them, they're good to use.
@pineknot19295 жыл бұрын
Been there trackhoe got to have cat control backhoe got to have deere control can run either if its on the right machine
@barmeyroberts82626 жыл бұрын
Case front-end loader rental ass backwards no switch to change.Bossman said he had a real operator coming to replace me I didnt even argue lol
@emtfireman8137 жыл бұрын
The biggest problem with having both Cat and Junk Deere on a job site....controls are backwards to each other. You learn to run one or the other, not both lol