EPIC Kraken Tire Inflation System for Jeep JL/JT - Installation & Usage

[@Swhbucsfan]

I have a Kraken system and just want to thank the Epic Adventure team. Their videos and product made my Jeep life so much easier. I couldn’t do the epic stuff I get to do without them. If you haven’t got their system in your Jeep you don’t know what you are missing.

[@EPIC-4WD]

Huge thanks Steven! We are super happy to hear that your Kraken is working as designed/intended. We appreciate your feedback! Cheers from the Ginger and the EPIC Team!

[@relay7565]

I just finished installing the Kraken system on my 2019 JLUR and it works great! If you're going to do onboard air, this is the system to do it with!! Super clean once completed and the instructional video was spot on. I paired mine with ARB's Pressure Control system. I find the onboard TPMS not as responsive as I would like. Air up or down with presets and auto-off once pressure is reached. Set it and forget it. You guys at Epic should concider creating an add-on kit for people that want to option ARB's Pressure Control system. It took me a week to source the right parts. I would much rather purchase an add-on kit from a trusted source. Think about it. 🙂 Thanks again for a great system!!

[@EPIC-4WD]

Thanks Peter! We appreciate your support. Cheers from the team at EPIC!

[@brianrice6717]

I just received my Kraken and am blown away. First of all the packaging is top notch - the cardboard box, kit contents checklist, the sealed plastic bags containing the major components, and the Adventure Trail Gear custom cordura zippered pouch. Awesome. As I opened the box to check everything out it just screamed QUALITY. The laser cut brackets, fittings, hose quality, etc. I can't wait to install it. Impressed.

[@EPIC-4WD]

Thanks Brian! Super happy to hear that you are enjoying an EPIC experience so far. Let us know if you have any issues installing. Cheers!

[@thezucernoodle2345]

Installed and used today. Extremely well thought out and manufactured piece of gear. Instructions are very clear and easy to follow. Great job Epic!

[@EPIC-4WD]

Sweeeeeet! Huge thanks from the crew here at EPIC! Cheers!

[@alfa8822]

Great video and product. Installation was easier then the other two ARB compressors I've installed in our JKs. I wish you had a distributor in the US so we could save that international shipping fee.

[@EPIC-4WD]

Thanks for your support. Our whole team really appreciates you. As for the shipping - we will be working on a US distribution in the future. In the meantime, we simply cannot keep up with the demand for this product! Cheers from the team at EPIC!

[@danthomas632]

Just installed on on my 2022 JLUR. I used to use CO2 and just don’t feel like dealing with frequent tank fills. I am super impressed with this kit/ combo and how the compressor is in the cab. Install was straight forward and the finished project is super clean. We’ll done team!!

[@EPIC-4WD]

Thanks Dan! We read out your comment to the team and they cheered. I then told them to shut-it and get back to work!

[@cambishop4278]

I just installed this in my RHD Gladiator in Australia!! It is absolutely awesome, so neat and out of the way. Well done EPIC a fantastic product and thanks for shipping all the way to me down south…..👍🏼

[@dragonseggs]

Just installed on my '22 JLR and released the Kraken! Awesomeness!!! Took me by myself about 2.5 hrs. Loved following the video for instructions and tips. My only issue was the rear seat floor mat fitting interferes with the mounting plate. Took me a few cuss words to figure out what the problem was. Noticed in the video that the 4dr rear mat attachment is further aft. No big deal, I simply cut the button off flush. Thank you, Ginger and company! It arrived nicely packed and perfect condition. Not even a stray beard hair.

[@EPIC-4WD]

Thank you for your feedback! In our next install manual update, we'll specify about the rear mat for sure. We're happy to hear that your package was beard hair free. Cheers!

[@chrisperry8007]

Finally got around to install. With this video and around an hour or so wallah is installed and running. What an awesome upgrade and peace of mind. Thank you feelers.

[@EPIC-4WD]

Thanks Chris! We're super happy to hear the install went smooth. I'll pass along your comments to our guys. Merry Christmas from the team at EPIC!

[@chrisperry8007]

@Epic Adventure Outfitters merry Christmas to you and your families.

[@khook100]

The Kraken arrived last week, patiently waiting on the porch for me to get home and let it breathe. As in the other comments, it was beautiful! I didn't have time to do the full install, but immediately did all the prep work as shown in this video. With only 1 problem, the install went flawless and exactly as shown on here. Problem you ask - Our JT came with the factory mud (weather tech) style floor mats - It never occured to me that the back mat tucks up under the front seat past the seat bolts which doesn't work well with the Kraken plate and compressor. I ended up having to cut the front of the floor mat off so it would line up even with the plate. Not the end of the world (although my wife hasn't noticed yet), knowing beforehand wouldn't have stopped me from getting this system, but I might have thought about a better mat solution before I was pot committed. Unfortunately it's going to be another week before I get to try it all out, but I'm excited.

[@keniaflores8881]

I actually have the JK products brand because of one of your earlier videos. This product looks so much better!! Great job guys! Plan on getting it for our future gladiator. Hopefully y’all have plans for a 4Runner/Tacoma version. My friends are very interested. Thank you!!

[@ginettedecker9494]

The Kraken has been unleashed in New Brunswick...and looks awesome on my Gecko Rubicon!!!

[@EPIC-4WD]

Awesome Ginette! Send us some photos if you have time! Cheers from the EPIC team.

[@johnbettano6026]

Man that is a really nice system to have in place.

[@EPIC-4WD]

Thanks John! We'll have more available shortly!

[@christopherl1990]

Just received mine and installed it tonight. Can’t wait to use it!

[@theycallmejim9643]

Super cool system! Will be ordering one once I pick up my Gladiator later this summer!

[@EPIC-4WD]

That sounds like a solid plan right there.

[@apettit7]

I tried my Kraken system for the first time on the trail and it worked awesome! Several off roaders with other onboard air systems noticed my Kraken system and came over to check it out and were quite impressed. Great design and well made!

[@katherinefrost5808]

Got mine installed today at Mule Overland Outfitters in Washington. I would have pushed "like", but it would have made me #666, so here's me saying, cheers for the instructional video!!!

[@EPIC-4WD]

Awesome! Thanks Katherine! We appreciate your support!

[@Bruce2518]

I installed mine today. This is a bad a$$ system. Thank you to all you brainiacs!

[@EPIC-4WD]

Thanks for your support Bruce! Glad to hear that you love the Kraken! Cheers from the team here at EPIC!

[@bendmacmanufacturing2744]

Just purchased your setup looking forward to installing and making use of it !!! tried other inflation setups and was not happy with the leaky connections and poor compressor quality !!!

[@EPIC-4WD]

Awesome! Thanks for your support. Cheers from the team at EPIC!

[@Jeeprassic]

Our great mechanics from Moab Outfitters (Russ Bartholomew) in Springville Utah installed the Kraken on our 2016 JK Rubicon. They had to modify the under-seat mounting plate specifically manufactured for JL models. Other than that, everything fit to function. We will be testing it at the Moab Easter Jeep Safari this year. This time, I will not be the last person at the end of the trail to finish inflating our 37" tires. Stay tuned for further reviews.

[@stefanmannsbart1028]

Just installed on a ‘22 392! Very cool everything fit correctly and works…… what are the 2 red pieces for? I assume the f you have air lockers ? Great product and video

[@dragonseggs]

Got to post again... first no association with EPIC, but wannabe. Airing up after the trail is a dream. I'm sure I sold a couple to the JL's on either side of me today just doing my air up. Watching my TPMS on the dash with beer in hand is the way. I'm generally not a big fanboy guy (I'm old) but this is the deal.

[@EPIC-4WD]

Awesome! Thanks for the feedback! Glad you love your Kraken. We can't make them fast enough! Cheers!

[@cwroadking]

Hello great video !! So when are you going to release a Kraken for a 2016 JKU ? I would love to be the first one to get it and show it off to my friends!

[@EPIC-4WD]

No plans at the moment to make a JK version. We'll let folks know if we change our minds!

[@TerraFirmaX]

Just ordered mine

[@EPIC-4WD]

Awesome. Huge thank you from the team at EPIC! We appreciate you. Let us know if you have any questions with the install once you receive yours. Cheers!

[@mr.e5988]

Thanks for taking the time! The video was very helpful.

[@mannypena2276]

Was just about to order this thing and it is listed at $323. I added it to my cart and the price changed to $399. To top it off they are charging $130 shipping fee.

[@EPIC-4WD]

Hello Manny, apologies for the mix-up. Our site uses Geolocation to determine if you're in the USA or Canada and then it's supposed to display and charge in the proper currency. The USA price should be around $323 and the Canadian price is $399. We'll look into why this happened to you before we launch the next batch. As for the shipping, sending product from Canada into the USA is costly (especially with the added duties). We're working hard to solve this problem. Thanks for your feedback, we greatly appreciate it. Cheers!

[@leebennett1369]

All I can say is thank you. And that was bad ass!!😎🤘

[@EPIC-4WD]

Thanks Lee! The product has been a labor of love for our team. We're pumped to have so many out there in the wild!

[@hugovillero6894]

Do you guys know a place in Toronto where they are able to install the system to my JL diesel 2020? Great video, thank you very much

[@shawnu22]

My factory floor mat drains through that plug, do you have a work around for that?

[@lloydrage]

Exactly. Run it through the fire wall

[@Casey250]

I missed out on the experience of unpacking the Kraken :(

[@EPIC-4WD]

Sucks to be you I guess lol ;-)

[@susanhansen4453]

Sitting o’re here, waiting for the sign that the Kracken for the Bronco is available! 😂🐴💛

[@EPIC-4WD]

Hello Susan. We are currently testing the Bronco Kraken. It's looking pretty awesome and our team is pumped to release it into the wild. Please email [e-mail] with your contact information and we'll be sure notify you when we have them ready to go. Cheers from the EPIC Team!

[@Papo9015Quiles]

Y’all making anymore this year? Or just a limited run and done? I would love to purchase this and throw it in my new Mojave I just bought couple weeks ago

[@EPIC-4WD]

Hey Kenneth! We're making as many as we can, as fast as we can. Please email [e-mail] and we'll get you on the September notification email list.

[@EjNappe]

Instead of going through the drain plug hole would it be possible to go through the firewall straight into the cabin from Under the dash?

[@EPIC-4WD]

Yes, people have. We're updating our install guide to show this shortly. Cheers!

[@michaelortega9516]

@@EPIC-4WD I just ordered the kraken but curious if the wiring will be of sufficient length to accommodate the updated instructions for the install through the firewall.

[@EPIC-4WD]

@@michaelortega9516 Yep, it works.

[@michaelortega9516]

@@EPIC-4WD That’s awesome!! I just received my order and can’t wait to get it installed this weekend!! In order to go through the firewall can I use an existing opening or would I need to drill a new one? Thanks again for the info.

[@JendellOverland]

Did you just call your Jeep a car? 10:54 I am definitely ordering 2 of these tonight at 7pm. Is there a way to route the wiring through the firewall instead of the floor?

[@TheEPICBeardedGinger]

You probably could route the wiring through the firewall, probably have to remove the inner fender to gain access enough to locate a place to pass through.

[@timolheiser7874]

Could the new EGOI dual air compressor fix be made to hook up electrically to your under seat mount? Thinking to install in a 2020 Gladiator.

[@EPIC-4WD]

We designed the Kraken specifically for the gold-standard ARB Dual Air Pump (CKMTA12). The Kraken may work with other pumps, but we're only supporting the ARB ;-)

[@yairhaim4191]

Great product! How can you fit it with the Teraflex Falcon 3.5 E-adapt brain (that also goes under the passenger seat)?

[@md4curvs]

Any thoughts on airing down? My Staun deflators work ok and are quick, but it'd be awesome if all four tires were the same pressure when rock crawling.

[@EPIC-4WD]

In all our videos, you'll see us use TrailHead Deflators - way way better than Stauns. We have them on our website epic-4wd.com

[@DTOverland]

Stupid question time. Since you install the wiring through a drainplug how do you keep water from coming in when going through water crossings?

[@exoplanetnomad]

I have a Jeep Wrangler Rubicon 4Xe, will this system work on the 4Xe? Knowing that it has no alternator! Thanks in advance!

[@EPIC-4WD]

Good question. Yes, this system will work in a Jeep Wrangler 4XE no problem. For example - Brad from Trailrecon has our kit in his white 4XE.

[@fiftyshadesofurban]

@@EPIC-4WD I'm surprised Brad kept the 4XE long enough to put your system in it hah. I know he got rid of it.

[@niki3151]

Who designs these epic characters like the Kraken, or the wrap Werewolf on the Mojave, the Blue Gorilla? Is it from the same designer?

[@EPIC-4WD]

It's all us baby!

[@skdemars]

@@EPIC-4WD Excellent work on those characters! I'll be ordering a Kraken when they're back in stock :D

[@overland_explorations]

Nice setup! Question; if I need to do just one tire, would that work with this system?

[@EPIC-4WD]

Yes, you can just pop the red plug in one side and then hook up one tire from the other side and flip the kraken switch!

[@spencermorrow2899]

How would I be able to air someone else up if they don’t have this system could I just use an arb air hose kit on either side

[@EPIC-4WD]

Yes Sir! Easy Peasy! - Just plug one side with our supplied red plug and hookup one of our air hoses to the other side and go to town!

[@darkstars2050]

Do you have a kit for putting the compressor anywhere else? Not a fan of having the noisy compressor in the cab.

[@TheEPICBeardedGinger]

At this time, this is the only kit we have, sorry.

[@niki3151]

Doesn't this obstruct the Rubicon floormats, ours had a camera but through the drain plugs now the floormats don't sit flush and feel weird and loose...

[@storminmoorman7444]

Yes, this will. And perhaps let a bunch of water and mud into your jeep. Ask me how i know, lol.

[@TheEPICBeardedGinger]

Yes this would obstruct the OE rubber floor mats but if you do any kind of water crossings those floor mats will let in more water than you know what to do with.

[@niki3151]

@@TheEPICBeardedGinger Any suggestions then for aftermarket floormats (Epic branded or atleast approved of course) and how to plug them holes (maybe even with out loosing the functionality of opening the drain after a serious mudding incedent) so the water stays out in that case :)

[@TheEPICBeardedGinger]

@@niki3151 all of us at Epic are running Husky liners and have for years in many Jeeps and trucks

[@richardthomas1531]

No problem. After owning several jeeps I can fix any problem .in this case Felcro.

[@trevinated]

What do you do when you're out and only have 1 tire to inflate? This system looks like you have to have lines connected on both sides to maintain pressure. Can you connect a single line to do a single tire when needed? Is there some sort of quick connect plug you can use to close the opposite side when not needed?

[@EPIC-4WD]

Good question! You leave the red plug in one side and then just hook-up the lines to the other side. Plug a tire into one line and away you go!

[@full_metal2452]

Why don’t you make it for the JK?

[@EPIC-4WD]

Because we can barely keep up with building the JL/JT versions... The JK will come in time when we get ahead of our production schedule. Cheers from the team at EPIC!

[@wrangler70jkujeep74]

You going make one JK models ?

[@Mchkoc]

Odd request… I noticed Trailrecon had the Kraken as well but the power switch was on the drivers side. I would prefer it that way. Is it simple enough to switch sides?

[@EPIC-4WD]

The power switch on the Kraken is only on the passenger side. In TrailRecon's recent video, the switch is on the passenger side as usual. The bracket is made for the passenger side for ease of install, and wiring.

[@Mchkoc]

@@EPIC-4WD YOU RIGHT! I went back and watched his video again and it is on the passenger side.

[@strix9013]

Does the compressor get hot enough to damage anything under the seat?

[@EPIC-4WD]

Nope. Tested extensively for years and it's good.

[@lloydrage]

Why not run the wires through the fire wall?

[@scottpeters7333]

I would buy this if You made it for 2015 Ford F350 Crew Cab Long Bed!!!

[@chrisdonohue3305]

Can this system be wired up to one of the Aux switches or does that not make sense to do it that way?

[@EPIC-4WD]

It can be, but it doesn't make much sense as it would be more electrical work... and you need your 4 aux switches for lights!!! Lots and lots of lights! Cheers from the team at EPIC!

[@kengeroo]

any upgrades/thoughts to make this set and forget (specify desired PSI and walk away and the compressor will stop when the desired PSI is reached ? )

[@EPIC-4WD]

Nothing at this time. If your Jeep is equipped, you can use the selectable tire fill alert system, which honks your horn at the desired PSI. I've done it a few times, but prefer to just look at the gauge on the dash 6 minutes in ;-)

[@MichaelRodgersCh]

Is it possible ARB changed the fuse design to glue or otherwise fix them in? They do not want to come out.

[@EPIC-4WD]

The orange maxi fuses should come out. They are in there pretty hard sometimes.

[@OnwardsOffroad]

haha had this same issue. grip it and rip it

[@OverNoobin]

So … if we can’t get them out? I’m stuck because I don’t have the hand strength & these suckers won’t budge!

[@OnwardsOffroad]

@@OverNoobin I finally got mine. Using Rigid Robogrips which are just oversized vice grips. You gotta pull hard but once you feel it budge a little it’s golden!

[@OnwardsOffroad]

@@OverNoobin ARB Support was zero help. I thought mine were glued too

[@gitmac53]

So why exactly won’t work on a JKU? The space under the seat? Or is there another reason why?

[@EPIC-4WD]

The JK and the JL are vastly different inside. The plate is designed for the JL/JT as are the other components like the included electrical wiring, etc. There are many other solutions for the JK available. We might get around to designing a JK version in the future.

[@gitmac53]

@@EPIC-4WD please do, there still a lots of JKs out there, it'll be good for business 😁🤟🏻

[@the.real.hamburgler]

What about airing down? Can you make it as quick as airing up?

[@voodoo36x]

And for those of us with an ARB-Twin already mounted under the hood?

[@EPIC-4WD]

Take your expensive compressor out from under the hood and put it safely inside, under the passenger seat lol ;-)

[@voodoo36x]

@@EPIC-4WD lol....got'cha, thanx!

[@kylecochran5088]

Can you hook the power and ground wires up to the wiring harness that’s already under the dash?

[@TheEPICBeardedGinger]

Unfortunately not as the compressor pulls more amperage than the small gauge wires under the dash can handle.

[@OverNoobin]

Thanks for this question; I came here to ask the same thing. 👍

[@NorthRedWave]

I love the system but having the noisy compressor inside the cabin is a big no for me :(

[@anthonyschilt1323]

can you hook up a regular quick detach hose to it?

[@TheTrailGeek]

How would this work if I say came up on someone who needed just one tire aired up?

[@toddn.9169]

I am wondering about this too. Is there a single hose option?

[@EPIC-4WD]

Simple - You keep the red plug in one side and hook up the other side with the supplied hoses. Connect just one line to someones tire and inflate.

[@TheTrailGeek]

@@EPIC-4WD Thanks for the quick reply!!

[@TheTrailGeek]

@@EPIC-4WD Any idea when more will be in stock. I was online right at 7pm launch night, but the site was malfunctioning and charging way more because it thought I was Canada. 😎

[@EPIC-4WD]

@@TheTrailGeek Hi Dave! If you can email us your contact info to [e-mail] for a Kraken, we'll make sure that we reach out when more are available.

[@mikezanassi207]

Do you have a system for the jku?

[@davidkirschenbaum829]

When will it be back in stock

[@TheEPICBeardedGinger]

It launches tonight at 7pm PST after a video from The Story Till Now.

[@kennethmoreno9328]

Can u still use this kit if u have ur aircompressor on ur back of the car bed

[@the.real.hamburgler]

Im stuck, how do i remove the maxi fuses?

[@MichaelRodgersCh]

Did you ever figure this out? I’m wondering if newer ARB twins are glued in. I’m pulling hard and feel like I’m going to break something if I keep going.

[@johnfulater2945]

Will one be created for the JK model?

[@bizzacore]

👆 Asking the real questions!

[@fiftyshadesofurban]

This is the most frustrating thing I have ever seen. Maybe it's just mine, but these fuses will not budge.. I have literally used pliers, I've wedged a flathead under them and tried to use leverage to take them off.. it's like they are welded on or something.

[@fiftyshadesofurban]

I ended up not taking out the fuses coz it was just way too impossible to remove them. I just left the harness over top of the side of the fender not hooked to anything until everything on the other side was hooked up, and then I hooked the electrical up to the battery last. Works great. Here's praying those fuses never go bad LOL.

[@EPIC-4WD]

You just pull the Maxi Fuses out... however they are in there pretty stiff. Usually I just grip the edges and work it back and forth a little and they pop out. Anyways, glad you got the install done. Cheers from EPIC!

[@anthonyb7568]

How much for the compressor??

[@jwoo6461]

Can this be used with the ARB compressor connect app? I am guessing not since it's meant for a single tire fill up.

[@MatDockerty]

Can't see why not, the compressor just sees one really big tyre anyway.

[@KyleCarey-f6y]

What size airlines?

[@matthewkeen3527]

Anyone using this with AEV Borah wheels know if the air chucks fit on the valve stems as they are recessed?

[@mav68nrs]

What brand are the deflator valves?

[@andreygrale7556]

Ахуэнно !!!

[@up2top]

Really disappointed you wrote "unpack the Kraken" instead of "release the Kraken." lol

[@EPIC-4WD]

Ed.... Ed... good call... our sincere apologies. We've made a mistake here and will correct it in the next video. Cheers!

[@storminmoorman7444]

Not trying to be a dick, but this looks like a rip-off of Innovative AT Products. They've been selling a nearly identical system for years. If I'm wrong please correct me.

[@EPIC-4WD]

Good question. Innovative AT makes a great product. We've been installing and using air-up systems from many different manufacturers over the past 20+ years, none of which installed or operated exactly like we wanted. With this kit, we designed it from the ground-up to our specifications and have extensively tested in field. We think that people will like the benefits of our system (ease of install, no-drill, included wiring harness, top quality plates, purge function, etc).

[@NIVAD84]

Man! Jeep people and putting logos on there parts. SMH

[@xmldigitz1]

What size hose?