Off Road Lights that are ACTUALLY Worth It!

[@trevorhowell6575]

Thanks for explaining Toyota Ditch lights...😂😂 Excellent content, and my son has met you Ginger a few times out and about in the town, and has really appreciated the time and advice you have given him to help him build his Wrangler and Gladiator.

[@christopherimhoff3046]

This is my favorite channel on KZbin. You guys do amazing work.

[@EPIC-4WD]

We appreciate you. Thanks for following along! Cheers from the Ginger and the team at EPIC!

[@siqi-北美驴吉普]

Nice set up! It's really the true "day and night" difference 😊

[@brokenwrench404]

That looks killer! No more darkness

[@EPIC-4WD]

The Gravity Titan is just a monster of light. Thanks for watching and cheers from the team at EPIC!

[@RDOverland]

The light bar looks great! 🔥

[@ahmednesbitte4906]

Awesome lights. Thank you for sharing!🚥

[@EPIC-4WD]

Thanks for checking out the video. We appreciate you. Cheers from the team at EPIC!

[@ahmednesbitte4906]

@ I hope one day you’ll open East Coast location. 🙏🏽

[@BaconCruiser]

I put a KC FlexEra 1 lightbar on top of my cruiser alone, and damn it’s a heavy beast. It’s an insane amount of light and the amber backlight halos look killer! If you see me in the ditch help a brother out 😂

[@davidcooper3957]

I have had my KC rock lights and gravity pros on my JKU since 2020 with no issues very well made keep up with the excellent videos

[@EPIC-4WD]

Thanks for following along! Cheers from the team at EPIC!

[@KevinSmith-wr1sy]

The Ginger - Surrey tourism ambassador 😅

[@Gerry-K]

Great post Crew from Epic. I had 4 KC day lighters on my old 80 Toyota. When turned on they would almost stall my motor at idle. 🤣 Stay safe and all the best in 25+!

[@EPIC-4WD]

Ha ha wow! Christian went overboard on my light setup. It's crazy amount of light. Cheers from the team at EPIC!

[@krashnpa]

The overhead lighting shot was pretty sweet. I have some FE3 and FE4 covers that I am putting some L&B Design Works KC decals on tonight because the KC fades to mello yello in the sun. The Yota ditch light comment... hilarious😂

[@Earlywinters09]

Love the double Willys build.

[@brianhall8518]

"KC designed the smallest light with a structural bolt that will hold the whole jeep together!" Perfectly said. I thought the same when i mounted my ditch lights. 17MM nut for THESE? OK then.

[@larrygriffiths5039]

I'm running the Flex era 3's with amber lenses also. You will love them! Another great episode!! Thanks Epic Team

[@EPIC-4WD]

So far they're pretty fancy offroad. Cheers from the team at EPIC!

[@TheJsoco]

Man I am enjoying these builds, my 24 Willys has a front bumper, rear bumper delete, sliders and the Rusty’s fascia kit so far but your videos give me too many ideas

[@glennbrass5313]

I put the lock nuts on my KC roof lights so when I’m out in Surrey they don’t walk away 😉

[@larshamilton40]

my titan light bar blinds everyone that dares stray into its beam , great builds hombres 🤠👍

[@theofficialcarter15]

Man I can’t believe they stole the top part of the rail. Sorry you have to deal with that! Love seeing the progression of these jeeps!! Added just a few lights eh 😂

[@jeffreybetts8014]

Amazing builds as always, thanks

[@EPIC-4WD]

Thanks for following along! Cheers from the team at EPIC!

[@Colorado392family]

Constant laughs and entertainment. Hope I get to make it up there one day and meet you guys! How much to buy Paul out? 😏

[@thisballcaplife9696]

Good vlog

[@EPIC-4WD]

Thanks for watching and following along. Cheers from the team at EPIC!

[@johnomahony7364]

I’ve watched probably thousands of off road vehicle videos but it still always make me wince when brand new vehicles are getting holes drilled in them and fenders chopped. 🤣

[@EPIC-4WD]

It's no biggie. We're numb to it now lol. Cheers from the team at EPIC!

[@JeepTJ1999]

I just had to do it today on my 2024 Wrangler. I installed the Rhino Rack Backbone system with HD bars for my brand new RTT.

[@Jan-pw4po]

I am not a Jeep guy,but I love your channel and today I hung out with lots of Jeeps, at Hale Creek, and so far no Jeep has pulled my Tacoma out of a ditch

[@coltonellison5355]

That’s the fun part though 😉

[@jonathanarsenault1895]

Love your vids !!

[@EPIC-4WD]

Super thanks from the Ginger and the team at EPIC!

[@LOVE-62]

Wish this light came out sooner than it did. I bought the Pro6 for my 392. Then this titan bad boy comes out. FML😆

[@EPIC-4WD]

Yeah, this Gravity Titan is an insane amount of light. It's silly really. Cheers from the team at EPIC!

[@kicomilner5152]

That thumbnail, the Ginger's version of Cyberpunk MaxTac.

[@joem5110]

13:18 I see the Titan lights are all the way down on the mount and are straight. Did you check his wiper blade function? My 2024 Wrangler Rubicon's wiper blades hit the Titan's plugs on the back and stopped. If I raised the light high enough, the nuts on the end would be 1/3 off the bracket. I ended up curving the outer two lights which moved the center 4 lights out away from the windshield. Might want to check that.

[@Wrangzilla]

I wish KC would make a Flex 4 that fits in the factory Jeep steel bumper fog light hole like Baja Designs does.

[@EPIC-4WD]

Yeah that would be killer. I have to say tho - the fogs you see in this video are spectacular. We went with the amber lens. And when you hit the button for the "extra" "non-legal" fog light, it's just silly bright. Cheers from the team at EPIC!

[@kengeroo]

are you guys going to run the light bar straight across,, or curved ?

[@overloadOverland]

i made the same wire routing mistake installing my KC Pro6 gravity lights. hahah.

[@EPIC-4WD]

It was figured out in 2 mins and run in 5 mins down the passenger side. Looks stealth too! Cheers from the team at EPIC!

[@carsonrogers1578]

Hopefully you all have good luck with the kc fog lights. I’ve had nothing but problems with mine

[@frankbrubicon5299]

Haha 😂 yep I knew yall two fools made a rookie mistake at the start of the video because I did the same thing when it was time to add the wires 😂

[@EPIC-4WD]

We weren't communicating ha ha. No worries, stuff gets done in the end. Cheers from the Ginger and the team at EPIC!

[@frankbrubicon5299]

@ yep I was that fool too when I got my new KC lights I could not wait to install them

[@cdnjeepoverland]

My only issue with large A pillar brackets is they have to come off every time you change the windshield - which can be a lot!!! Oh, and the sheer size of the KC lights block your upper windshield view (hard to see traffic lights, etc). On my old JKU the backing nut slipped, then the rivnuts failed … was nothing but a PIA. With my JT I said never again, and just mounted it up on my Sherpa rack. A little higher up, nothing on my A pillar, and complete visibility out my windshield

[@Vik_ter]

i wanna hear more about the locker wiring bypass. I too wanna control my lockers and don't want the computer to do it for me.

[@EPIC-4WD]

Just a few days ago I took my Jeep offroad - and selecting front/rear lockers as I choose is fantastic. We'll cover more of this in our next podcast for sure. It's easy to do. Cheers from the team at EPIC!

[@Vik_ter]

@@EPIC-4WD ill be waiting. lol

[@LOLewie]

dumb question. But on the KC light bar, the light covers, Are they individual? Just wondering how much it sucks to remove the covers from the middle lights

[@EPIC-4WD]

Absolutely not a dumb question! KC gives you a little metal tool that you use to pop the covers off easily. However, yes getting the 2 middle ones requires that I stand on the side steps to reach them ;-) Cheers from the team at EPIC!

[@porkrindrob]

Would be cool to see how you are wiring these multiple lights up to a switch panel. Once you add a bunch of lights wiring can get messy.

[@WolfOverland]

Your mom will love these lights.

[@EPIC-4WD]

She most certainly does!

[@xtina818]

I see that jerry can set up on the teraflex tailgate reinforcement. Tell us more!

[@TheEPICBeardedGinger]

shhh....

[@ruskiyify91]

These are all good and all but for the price you will never beat diode dynamics lights

[@TwistedOff]

✌️

[@egosalonrussel]

Shines

[@shepherd8203]

F en cool beans.

[@brokenwrench404]

Kc has some issues. All of my cyclones have a dead leds

[@EPIC-4WD]

The little cyclones have had problems in the past yes. So far we're months in - with a wet climate - and they're all working fine. We'll do an update/review on the lights in 5-6 months when we have some time on the trail with them. Cheers from the team at EPIC!

[@CheetoFaceDonConvict]

Won’t that guy steal your lights next?

[@JeepTJ1999]

I hated to hear your snorkel top was taken, BUT...now that 'ol Justin has decided to leave office, maybe just maybe y'all will elect a Conservative leader that isn't woke & allows y'all to have your guns back. People really are nicer & less likely to take things from you when you live where you can own firearms. Right now, only the bad guys have them in your country, but I would love to see more of what I call the old fashion way of living, where y'all can carry & your new leader is much nicer to the truckers. Heck, maybe just maybe we could all become one.😉 That would be kind of cool. I doubt that will happen, but it is a nice thought. Screw the woke-minded leadership, screw the socialistic government, screw socialized medicine & let's enjoy our Jeeps, guns, big V8 engines & good riddance to Justin Trudeau & his liberal ass!!!!

[@andrewar7847]

I wish KC held up better in the winter. In one winter they looked awful.