Episode 5: Carburetor rebuild part III (final assembly) 1978 Honda CB750 K8

Third and final video in the 1978 CB750 carburetor rebuild
I'll show you some fresh parts that will help me get Scout running and I'll show you the Vessel JIS screwdriver I picked up in case your looking for one too and why I went for the one I did.
=Chapters=
0:00 Outline
0:16 Float height
1:00 Fuel / vent lines
1:40 Felt seal
2:10 Installing carb #4
3:00 Final throttle linkage connections
3:30 Carb top install
4:15 Fuel pump install
5:00 Choke plates/valves
5:50 Main stay plate install
6:45 Mixture screws
7:40 Float bowl drain screws
8:00 All done
8:30 New parts!
10:20 New JIS screwdriver
-----------------------------------------------------------------------------------------------------------------------------------------------------------------
Amazon Affiliate Links
Tools:
Vessel Screw Driver amzn.to/3hBgsJ0
Wintergreen Oil: amzn.to/3j5XF8W
Rust Mort amzn.to/3gIRFlN
Vapour Blaster Components:
Submersible pump amzn.to/3Ua8THp
LED's amzn.to/3xmCCn4
Gloves amzn.to/3qCP660
-----------------------------------------------------------------------------------------------------------------------------------------------------------------
#cb750 #Okanagan #4into1

[@stevensapyak7971]

12.26.23. ☕️That docking plate you use to mount the carburetor bank to work on, is quite enterprising❗️

[@DocJonesGarage]

Thanks! there's a couple of changes I'll make to it but it saved me wrestling with it on the work bench that's for sure

[@albertofranco401]

Hi! Awesome explication! Where did you buy those felt wiper rings?

[@DocJonesGarage]

Hello! I didn't replace the wiper rings but they are available online, they just looked "newer" because I cleaned the carb body before I realized they were in there. Thanks for watching!