Tap to unmute

Episode 5 - Through the 2nd Stitch with an Elna 6003

  Рет қаралды 15,350

ABBE Repair

ABBE Repair

Күн бұрын

Пікірлер: 21
@1953childstar
@1953childstar Жыл бұрын
That machine is made by Janome. It uses a standard class 15 bobbin ( Not an Elna bobbin ) and there is a vertical spool pin in the accessory kit..
@DonnaRehrig
@DonnaRehrig 7 ай бұрын
thank you
@SharonWeiller
@SharonWeiller Жыл бұрын
Great video! Very clear and concise. Thanks!
@renewmovementcolorado
@renewmovementcolorado 7 ай бұрын
I really appreciate the hand placement during the critical moments of detail (can't see anything) LOL
@aussielass5621
@aussielass5621 5 жыл бұрын
Good video, do you have one on what the buttons do on the elna 6003
@janafoley6272
@janafoley6272 Жыл бұрын
@ABBEREPAIR any idea why my reverse isn't working on elna 6003?
@robemega
@robemega 4 жыл бұрын
Anyone know how to recenter the needle?
@lesliesmith1394
@lesliesmith1394 Жыл бұрын
Hello Allen. Love your videos. Well, I find that my Elna 6003 doesn’t have pretty stitches. It looks like 1 line? I tried increasing length but same look? Help? Thanks!!
@debbieelms-watkiss4742
@debbieelms-watkiss4742 4 жыл бұрын
How do you oil this machine I had mine for 20 years and not used a lot as I have used the elna overlocker mostly. I would like to give it oil before I use it again but nothing in the manual thank you
@abberepair8288
@abberepair8288 4 жыл бұрын
Debbie Elms-Watkiss hi Debbie Elms-Watkiss. Every machine is different but they all use the same type of components. Bearings that allow for spin. Bearings that let shafts slide like the bearings on the needle bar and linkages that have little hinges on them. All of them need lubricants. In my video on lubrication i try to show just that. I hope this helps. Allen
@DonnaRehrig
@DonnaRehrig 7 ай бұрын
I couldn't see the needle threader procedure . It should have been a close up shot.
@pennyelliott2053
@pennyelliott2053 4 жыл бұрын
I am trying to applique, the book says to use #14, that is way too heavy. Is there another stitch?
@ฉัตรชัย-ฆ9อ
@ฉัตรชัย-ฆ9อ Жыл бұрын
เลือกลาย 10-42 ได้ยังไงครับ
@LindaSJones-wg2ns
@LindaSJones-wg2ns 4 жыл бұрын
Please Help! I have a Elna 6003 and I took off the bottom plate to give it a good cleaning, and now it sews in reverse. How can I fix this, I did not take any parts off.
@carolsmith6618
@carolsmith6618 8 жыл бұрын
I have this machine and Elma 6003. It doesn't say anywhere in the manual about oiling. Is this a self lubricating machine?
@abberepair8288
@abberepair8288 8 жыл бұрын
Carol Smith thanks for your question. This is a misconception in the industry! All machines need lubrication! Oil and grease start to dry and decay the moment they're exposed to air. Over time oil looks like a stain and grease gets as hard as bar soap. Old oil and grease should be removed and replaced with new. Most machines need their hooks oiled every 4-6 hours or less of sewing time!
@nancysadoine3033
@nancysadoine3033 5 жыл бұрын
J ai trouvé une vidéo mais elle n est pas en français car je ne elle doit être français merci
@abberepair8288
@abberepair8288 5 жыл бұрын
nancy sadoine thank you for responding. I wish I could afford to do voice overs in several languages!
@triciavangeens4055
@triciavangeens4055 6 жыл бұрын
Thank you for the video! :-)
Sewing Machine Repair with a Viking 190
6:33
ABBE Repair
Рет қаралды 20 М.
The Elegant Elna Air Electronic TSP Sewing Machine - Basics
38:29
Quando eu quero Sushi (sem desperdiçar) 🍣
00:26
Los Wagners
Рет қаралды 14 МЛН
Episode 4 - Through the 2nd Stitch with a Singer 646
9:09
ABBE Repair
Рет қаралды 10 М.
Обзор Elna 3003 3005 3007
10:59
Elna Russia
Рет қаралды 22 М.
Richtig einfädeln an der Nähmaschine | KreativZeit | Elna Deutschland GmbH
11:25
Episode 7 - Through the 2nd Stitch with an Elna 62 C
6:23
ABBE Repair
Рет қаралды 4,9 М.
Episode 2 - Through the 2nd Stitch with a Singer 99k
11:54
ABBE Repair
Рет қаралды 9 М.
Start Sewing - Anatomy Of A Stitch
10:39
ABBE Repair
Рет қаралды 7 М.
Sewing Machine Repair: Lubrication
17:26
ABBE Repair
Рет қаралды 130 М.
OVERLOCK STITCH | No Serger Needed
10:24
Jan Howell
Рет қаралды 596 М.
Quando eu quero Sushi (sem desperdiçar) 🍣
00:26
Los Wagners
Рет қаралды 14 МЛН