Episode 7 - Through the 2nd Stitch with an Elna 62 C

[@dianahance8677]

How many layers of denim will it sew thru!!!

[@dianahance8677]

How many layers of denim will it sew thru???

[@baoquocdoan]

I'm having issues un 'snugging' the clutch - video at 2:26 - is there any tip or trick if it seems really tight?

[@abberepair8288]

Hi Bao Quoc Doan! Old oil and grease make clutches stiff. If the clutch knob turns but the hand wheel spin freely the clutch needs to be cleaned and lubed. If the clutch knob doesn’t turn far enough to let the clutch slip the inner “3 lobe washer” can be adjusted by removing the clutch stop screw, removing the clutch knob and removing the 3 lobe washer and twisting it 1/2 turn and reinstalling. The clutch knob should turn about 1/8 to 1/3 of a turn. I hope this helps. Allen

[@soniadelvalle1422]

I need help! The threads got tanggled where the bobbin is set. So my machine stuck! It's impossible for me to disassemble this part!

[@emyb.s.2632]

por favor, podrían traducir o colocar subtítulos en español de este video.

[@肖铁肩]

我没看说明就操作，底线乱了，清洗后梭心就不动，怎么办？

[@ushasingh2122]

Hi I have the Elna Supermatic 62c I was always able to use the overlock/zigzag stitch but Now it's only giving straight stitches. I have tried adjusting stitch width /changing disc an selecting zigzag stitch etc. It just won't change to zigzag .Please assist. Thanks ...Usha from South Africa

[@beatricebenda8887]

I have the same issue, and a different repair shop says this is a broken cam gear drive. See You Tube In Stitches for videos on repair, i have not yet started this....There are ways to confirm this is your issue....Good Luck! I'm in Minne-SNOW-ta (minnesota, usa)

[@sylvainnaef9319]

K;