Epoxy Resin Crafts | DIY Resin Notebook Cover | Resin Purple Flowers

This is a epoxy resin craft video. Today we learn how to make a notebook cover with epoxy resin. This easy tutorial video are friendly to beginners. Please find the materials and tools needed in this project below this description.
这是滴胶教程影片。 今天我们来学习如何简单的使用滴胶制作出漂亮的笔记本。 教程非常简单，适合初学者观看。 以下是教程所需要的材料和工具列表。 希望大家会喜欢这部影片。
Material / 材料：
Epoxy Resin 硬性滴胶 AB ratio 3:1 AB比例 3:1
UV Resin UV胶
Magic Mirror Powder - Purple, Rose Red, Green, Bronze 魔镜粉-紫色，玫红色，绿色，古铜色
Resin use color paste - Black 滴胶专用黑色色膏
Gold foil letters sticker 烫金文字贴纸
Butterfly Stickers 蝴蝶贴纸
A5 Notebook Refill Paper A5笔记本芯
Notebook Gold Ring 笔记本连体卡圈
Tools / 工具：
Silicone mold 硅胶模具
Stationery Tape 胶带
Eyeshadow latex sponge 眼影刷
Electronic Scale　电子称
Popsicle Sticks　冰淇淋棒
Torch 打火机
Disposable pipettes 一次性移液管
Clippers 夹子
Silicone Pen 硅胶笔
UV Light UV灯
Instruction for mixing Epoxy Resin 3:1:
1. Clean your mold and tools. 清洁模具和工具。
2. Mixing epoxy resin (A:B in weight ratio 3:1)
- Epoxy requires a minimum mass of material for the chemical reaction to occur properly. I suggest to mix minimum 9 grams of resins (Part A) with 3 grams of hardener (Part B). 混合滴胶(A:B 重量比3:1)-环氧树脂需要最小质量的材料，以使化学反应正常发生。我建议至少9克树脂(A部分)和3克固化剂(B部分)混合。
3. Pour Resin (Part A) to Hardener (Part B) into an empty plastic cup (normally I'm using silicone cup). 将树脂(A部分)和固化剂(B部分)倒入一个空的塑料杯(通常我使用硅胶杯)。
4. Make sure to mix the 2parts epoxy according to the weight ratio 3:1 (Part A:B) 确保两份环氧树脂按3:1的重量比例混合(A部分:B部分 3：1)
5. Stir the mixture slowly using stick, mini spoon or silicone stick. This will minimize the possibility of air bubbles forming in the mixture.用小棒或小勺子慢慢搅拌。这将尽量减少在滴胶中形成气泡的可能性。
6.Let the mixture sit for 5-10 minutes to allow any air bubbles to rise to the surface then remove the bubbles by using torch lighter. 让滴胶静置5-10分钟，让气泡浮到表面，然后用打火机将气泡清除。
7. Pour the epoxy resin into mold. Remove any air bubbles which may have formed during the application. Simply place the toothpick on the bubble and draw it towards the surface then remove it using torch lighter. 将滴胶倒入模具中。清除任何可能在应用过程中形成的气泡。只需将牙签放在气泡上，将其拉向表面，然后用打火机消泡。
8. Once applied, please allow minimum 16hours for the mixture to be cured. 倒入模具后至少等待16小时固化。
9. Be sure to check on it periodically to make sure no air bubbles have formed in your design. 一定要定时检查，以确保没有气泡在滴胶内形成。
Notes:
1. Please wear respirator mask and nitrite glove during the progress. 施工过程中请佩戴防护口罩及手套。
2. Hard type epoxy resin are suitable for making jewelry, river table, tabletop coating and more. 硬型滴胶适用于制作首饰、河表、桌面涂料等。
3. For Weight ratio A:B 3 : 1 Example 9grams A mix with 3grams B 重量比例A:B 3:1举例:9克A与3克B混合
For volume ratio A:B 2.25 : 1 Example 22.5ml A mix with 10ml B 对于体积比A:B 2.25: 1例22.5ml A与10ml B混合
4. Suggest to add slightly more hardener (5% extra) if use volumetric measurements. 如果使用体积测量，建议添加稍多的硬化剂(额外5%)。
5. Don't add too much colorant at once. Add several times in small amount until you get your desired color. 不要一次加太多的色剂。少量多次加入，直到你得到满意的颜色。
If you like this video, Please do SUBSCRIBE our channel / @jjcraftandstyle , turn on the notification🔔, hit the like 👍button and share our videos💞. A big hug for you 🙆🙆and thanks for watching🙇.
如果喜欢这影片，欢迎订阅我们的频道 / @jjcraftandstyle ，开启小铃铛🔔，按赞👍并分享我们的视频💞。在此给您一个大大的拥抱🙆🙆也非常感谢您的收看🙇。
-----------------------------------------------------------------------
Stay tuned in our KZbin Channel / @jjcraftandstyle , facebook book page / jjcraftandstyle
The following link are the videos playlist shared by this channel, feel free to watch and your comments are valuable to me ❤🤗
👉DIY LAMPSHADE | 自制灯罩
• DIY LAMPSHADE | 自制灯罩
👉SIMULATION CREAM GLUE CRAFT | 奶油胶手工
• SIMULATION CREAM GLUE ...
👉EPOXY RESIN ART | 滴胶手工
• EPOXY RESIN ART | 滴胶手工
👉UN-BOXING SERIES | 开箱系列
• UN-BOXING SERIES | 开箱系列
👉CEMENT CRAFT | 水泥制作品
• CEMENT CRAFT | 水泥制作品
👉WASTED MATERIAL CRAFT IDEAS | 废物利用手工
• WASTED MATERIAL CRAFT ...
👉JUTE ROPE / HEMP ROPE CRAFTS | 麻绳手工
• JUTE ROPE / HEMP ROPE ...
👉DIY CARDBOARD BOXES | 纸箱废物利用
• DIY CARDBOARD BOXES | ...
👉POPSICLE STICKS CRAFT | 冰淇凌棒手工
• POPSICLE STICKS CRAFT ...
👉CHENILLE STICK CRAFTS | 扭扭棒手工
• CHENILLE STICK CRAFTS ...
👉PAPER CRAFTS | 手工折纸
• PAPER CRAFTS | 手工折纸
#epoxyresincrafts
#resinnotebookcover
#resinarts
#diyresinproject
#epoxyresinnotebook
#diynotebook
#diynotebookcover
#epoxyresinarts

[@mansisandan]

Amazing and so easy steps you showed.Thank You.

[@jjcraftandstyle]

☺️🌹

[@jenniferphang3882]

Amazing work

[@jjcraftandstyle]

Thank you 😘❤

[@Top2tow]

Stunning❤

[@jjcraftandstyle]

Thank you ☺🌹

[@elanoiluvsharing]

Love it so much😍😍

[@jjcraftandstyle]

Thank you 😘❤

[@kimjefferson3425]

❤❤❤❤❤❤

[@jenniferphang3882]

😘😘😘😘😘

[@judieloux3610]

What an awesome idea! ❤️

[@jjcraftandstyle]

Thank you 😘❤

[@jenniferphang3882]

Thanks dear.... nice work

[@dawniedorsey3011]

Omgggg so nice where’d you get the flower mold?

[@jjcraftandstyle]

I got this from Taobao on-line shop China. You can try to search this flower silicone mold from AliExpress or Amazon. ☺️

[@hannekebb]

Could you post a link for the flower mold? This is is beautiful!❤

[@jjcraftandstyle]

Hi. This is the link👇 shp.ee/yf2tmbh

[@martipiegl9457]

I cannot find any mention of where to buy the silicone flower mould. I would love to make it for my daughter. Can you help?

[@jjcraftandstyle]

Try this link👇 www.amazon.com/Flowers-Silicone-Fondant-Chocolate-Decorative/dp/B09417TMFF

[@jjcraftandstyle]

I sent you a link for another type of mold. Coz the one I bought was from Taobao China and the stock was no longer available now.