I watch your videos over and over and I'm having such a hard time believing it's that easy, but it actually is because the whole procedure on camera! Your epoxy resin is incredible, no bubbles AT ALL!!
@LeggariProducts6 жыл бұрын
We have a high end epoxy that has an additive in it to make the bubbles rise to the surface and pop on their own. Thanks
@kimcrowder73685 жыл бұрын
I love watching these videos! But it's really tough to choose which technique and which colors because they all look so good!
@LeggariProducts5 жыл бұрын
Go to our website at leggari.com and click on countertops or floors. Then click on the gallery, and if you hover you mouse over the picture it will tell you the color combo. Thanks
@craftsmadepersonal10966 жыл бұрын
All of the techniques look amazing! My husband and I are having our 1st house built, which will be completed in August so I would love to try these on a diy desk for our office space. You make it look so easy.
@LeggariProducts6 жыл бұрын
Hi, take a look at our online brochure. Thanks online.flippingbook.com/view/364043 leggari.lpages.co/sample-kit-ad/
@fseah886 жыл бұрын
Copper and coffee is definitely my favorite. Thanks for the product demonstration.
@LeggariProducts6 жыл бұрын
Hi, take a look at our online brochure. Thanks online.flippingbook.com/view/364043
@jaggery776 жыл бұрын
Love the sample kit videos to keep showing me design ideas and color combos. I’m lovin the bronze and coppers or orange Gold or burnt orange I’ve seen in others as it goes so well with other colors. Can’t wait to do our counter tops! My wife loved the purple and green dirty poor episode with the alcohol spritz to finish it off. Amazing how it wasn’t to in your face even with such bold purple and green bright colors! It was truly original looking and it’s stuff your not gonna find at just any counter place or you’ll pay so much to try and get it anyways. Great videos guys. Keep them coming to show us new combos and ideas!!
@LeggariProducts6 жыл бұрын
Thanks jag for the comment. Have a look at our brochure. online.flippingbook.com/view/364043
@vincentlee61125 жыл бұрын
Got my sample kit and I tried 2 different techniques and I liked them both. Did not use a heat gun or torch and there are no bubbles. If only I could keep lint from getting on it. Can't wait to try some other stuff. Great product. Give it a try.
@JessieColt26 жыл бұрын
I think I am in absolute LOVE with the dispersing affect. I haven't seen a color combination yet that disappointed me with the dispersing affect.
@LeggariProducts6 жыл бұрын
If definitely gives it a different and cool look. Thanks
@danacease91816 жыл бұрын
Beautiful. I love to see some bright red. Would be a total awesome.
@LeggariProducts6 жыл бұрын
We will add that to the list Dana. Thanks
@debbiewingate21136 жыл бұрын
Beautiful the hard part is deciding which kit to order!!
@LeggariProducts6 жыл бұрын
Take a look at our brochure to see all the different applications. Thanks online.flippingbook.com/view/364043
@pamelashackelford18504 жыл бұрын
Looking very good I love all those colors amazing 👌
@LeggariProducts4 жыл бұрын
Thank you! We appreciate it!
@jf97986 жыл бұрын
My favorite was the last one. All three look amazing. I was wondering if you could do a video with black base and blue and silver highlights. Curious to see what it would look like. Want to do my counter tops with those colors
@marianfarmer44666 жыл бұрын
Just ordered my sample kit and can't wait to try it. We want to cover our 1970's kitchen countertop that is covered in 4" tiles. Hoping you have a video about how to do that!
@LeggariProducts6 жыл бұрын
Yes it can be put over tile, but you need to fill all your grout seams with multi purpose bondo from home depot, then sand it smooth, this will scuff up your tiles also, then wipe it clean with denatured alcohol then you are ready to apply our epoxy. kzbin.info/www/bejne/nWmqq6aCZdCjpNU
@yifanwu52056 жыл бұрын
You are doing better then before! You could be a artist!!
@LeggariProducts6 жыл бұрын
Thank you.
@MrSuperman44404 жыл бұрын
Love your videos!! I’m looking into starting epoxy and love how great your product is. The copper was my favorite
@debiherring64365 жыл бұрын
They are all beautiful. I like the coffee and pearl white best. If it is as easy as you make it would go fantastic with my granite.
@LeggariProducts5 жыл бұрын
Hi, take a look at our online brochure. Thanks online.flippingbook.com/view/364043
@docteurpeinture6 жыл бұрын
helloooo Legarri products, it is possible to find your products for Europe ? thanks for your answer
@LeggariProducts6 жыл бұрын
We are not set up to ship internationally right now, but we are in the process of setting up our international shipping. Check back with us in a few months. Thanks
@docteurpeinture6 жыл бұрын
@@LeggariProducts ahhh really pity ! it was to do a video for my youtube channel :( but i will wait , thanks for you reply
@Nutingbuthope6 жыл бұрын
I love the copper!!! Especially once the alcohol was added! Gorgeous
@LeggariProducts6 жыл бұрын
Hi, take a look at our online brochure. Thanks online.flippingbook.com/view/364043
@Nutingbuthope6 жыл бұрын
Leggari Products thank you, I just realized my favorite is brass not copper , your catalog does a good job of distinguishing the colors
@mohammadjamilachmad38274 жыл бұрын
Leggari Produc... Beautiful, thanks for sharing... Good job 👍
@sonitapajnrasthoj54996 жыл бұрын
My favorite is the first and second design.
@LeggariProducts6 жыл бұрын
They both look pretty cool, thanks for watching the video.
@haydenrowe54826 жыл бұрын
When you drizzle the color on do you have to mix it in because when you put the silver on the black I’d rather have just the lines of silver.
@LeggariProducts6 жыл бұрын
You don't have to mix it in, you can have any look you want. Thanks
@carlaprice17116 жыл бұрын
Hayden Rowe thank you because that was my question. I just started watching their show and I like it mix but I love when they don’t mix it!!
@TheWoodWerker6 жыл бұрын
Great Video Tutorial! I ordered my sample kit last night! Super excited to get started! Have A Super Week!.....Gus
@LeggariProducts6 жыл бұрын
Thank you, take a look at our brochure. online.flippingbook.com/view/364043
@jc-details51256 жыл бұрын
I have been practicing with “cheap epoxy” from box stores...I was wondering if there was really a difference...so I ordered a sample kit..got it today and used it..let me tell you this..there is a HUGE difference..as soon as I started mixing it I could tell...there were no bubbles at all and I was mixing it pretty hard..after I poured it onto my mdf board...I was blown away..it looks amazing..even better in person! I guess you get what you pay for! Blown away..! And no torch needed like they say...amazing stuff! Thanks for all the videos!!
@LeggariProducts6 жыл бұрын
Thanks for sharing that info, that is what we are trying to convey to our customers. Thanks again.
@QUICKSCOPINxHOES6 жыл бұрын
JC-Details sounds great ..how much did it cost you at the end ? And how long did it take after you ordered it
@raw77986 жыл бұрын
What an awesome product.... can not wait to get my sample .. hope its white base with black That looks so cool...
@danpmatz5 жыл бұрын
So what if you're doing this over laminate countertop do you just scratch the surface with sandpaper first?
@bushbosh5 жыл бұрын
After its cured is it scratch resistance? And what about if I put a hot coffee cup does it leave a mark? And what about any drop of chemical will it ruin what I did? Or do you varnish or seal it to protect it?
@uhgtheuhg6 жыл бұрын
Awesome products. Since finding your channel a month ago my GF and I have been going through your videos daily, watching and wanting to buy a kit. We rent so we cant do much, but I am starting a bar countertop project that mobile, and I really want to use your products for it. Keep up the great work!
@LeggariProducts6 жыл бұрын
Thank you
@touchstonejean28775 жыл бұрын
They are all my favorite!
@itstherealjammin3 жыл бұрын
How did you get away with not sanding or priming the sample board before adding the base coat?
@maryalvarez43866 жыл бұрын
Me encanta tu trabajo....lo mejor es que manejas tres tablas con diferentes colores y nos das muchas opciones...muchas gracias.....
@michellehengel15056 жыл бұрын
Hi, what makes your product different from the others? They look fantastic! If I was to use on a stained surface, would I need to seal the stained surface with a poly prior to doing this? I would also be adding colors & the epoxy with some of the stained wood exposed. Thoughts?
@LeggariProducts6 жыл бұрын
There is no comparison because they don’t sell the same products. All of our resins are ultra refined industrial grade 100% solids resin that is a 2 to 1 mix ratio. We only use the best raw materials on the market when manufacturing our resins and Our Products have been tested for over a decade in real-life environments. You would need to sand the surface with 80 grit using a palm sander. Thanks
@michellehengel2156 жыл бұрын
Leggari Products Thanks for your reply. I’m thinking of a very artistic design. Yes I know I would need to sand my top. Wondering if after I stain do I need to seal the stain prior to adding this finish. I’ve been researching & it does seem your product is the best. Thanks for your assistance.! I’m an artist & do have many ideas for use with this product.
@panorama8panorama8453 жыл бұрын
Hello and bravo, can you tell me that we must use Isopropyl alcohol 99.9% or denatured alcohol at 90 ° thank you in advance for your answer
@shazification226 жыл бұрын
Looks easy and fun to do. Wanted to know even though its a sample piece i wouldn't want put it to waste. I'm i able to embelish the are piece with geode stuff like crystal, small stones, gold leaf and glitter? Thank you 😊
@LeggariProducts6 жыл бұрын
That would be a really cool looking art piece. Thanks
@1320freek6 жыл бұрын
My favorite was the black and silver. I ordered a sample kit and it got here today. I got the coffee and pearl white. I really like that brass color! Maybe if I order another kit, I will order the brass. (By emailing them with my order number).
@LeggariProducts6 жыл бұрын
Yes that is correct, email us your order number and the two colors you want at leggari@gmail.com. Thanks
@derekmorrison19734 жыл бұрын
Do u not need to primer the wood first?
@LucasDomProject5 жыл бұрын
Is that MDF boards ?
@LeggariProducts5 жыл бұрын
Yes we are using MDF board to apply the epoxy over. Thanks
@gloriakoch42425 жыл бұрын
When you are doing something vertical, as in a new tub surround, is it a good idea to do that board flat so you can attempt to match your countertops? Then when it is dry, you can mount it vertically. .???
@LeggariProducts5 жыл бұрын
Yes, we have some customers who coat shower panels horizontally then glue them up but it’s not a very good application if you’re trying to coat vertical surfaces. Thanks
@vpd5206 жыл бұрын
The kits are great ideas. I can't wait to get mine!
@LeggariProducts6 жыл бұрын
You can order from our website at www.leggari.com. Thanks
@nvclaudiamack6 жыл бұрын
I would love to see one of these kits with a deep navy blue base with neon lime green veins.
@LeggariProducts6 жыл бұрын
That sounds cool, we'll look into that. Thanks
@tigerdog52596 жыл бұрын
So I have use some cheap oil base countertop paint and it has chips in it, if I wanted to use your product do I have to do any pre-treatment to the counter or just throw it on?
@LeggariProducts6 жыл бұрын
Very simple, just sand it with a palm sander and 80 grit then you can apply our product over it. You can order our product at www.leggari.com Thanks
@mckinleyhodges48456 жыл бұрын
Are you guys considering doing an older laminate countertops? The kind that attaches with contact cement.
@LeggariProducts6 жыл бұрын
We can look at doing that. A lot of our countertop videos and going over laminate counter tops. Thanks
@theresagonsalves6 жыл бұрын
Okay.... I did a little project and it looks beautiful, however, how do you keep the epoxy on the sides? You have some painted, and I did that but it just drips right off... Please advise as to how this would work on a countertop for the sides?
@LeggariProducts6 жыл бұрын
Once the epoxy is self leveling it will run over the sides just take your roller and keep going over it. It will not be as thick as the countertop but it will adhere to the sides. Thanks
@nattybohman6 жыл бұрын
Beautiful flooring and counter top work, was wondering how can you do a full job at home? Your site seems to only give the option to purchase the sample.
@LeggariProducts6 жыл бұрын
You can order the product on our website at www.leggari.com. online.flippingbook.com/view/364043
@Shadowveil266 жыл бұрын
I love the middle one.
@LeggariProducts6 жыл бұрын
Thank you
@mckinleyhodges48456 жыл бұрын
Ok you finally done it. I ordered a sample kit.
@edardonn20536 жыл бұрын
Mckinley Hodges where did you ordered?
@LeggariProducts6 жыл бұрын
From the link below. Thanks leggari.lpages.co/sample-kit-ad/
@henryj70806 жыл бұрын
Can't wait to try this I have a very small kitchen with very old countertop, it looks easy. Where do you order products
@LeggariProducts6 жыл бұрын
You can order the product from our website at www.leggari.com. Thanks
@dannymr99786 жыл бұрын
What are the steps to apply it in flats? is it true that the first or impricaion goes and then the finish?
@fredbush34046 жыл бұрын
I ordered my sample I have not heard from anyone as to the status of my order. We are planning a kitchen remodel, I am going to use the product just want to know when I could receive my sample. Very excited to try.
@LeggariProducts6 жыл бұрын
Email us at leggari@gmail.com with your order number. Thanks
@loidadevera16926 жыл бұрын
How can I order your product? I am from Manila, Philippines. Do you have a dealer or outlet here in the Philippines?
@LeggariProducts6 жыл бұрын
We are not set up to ship internationally right now, but we are in the process of setting up our international shipping. Check back with us in a few months. Thanks
@obi40pr6 жыл бұрын
I have a black countertop I have to sand it and primer?
@joanndahl77196 жыл бұрын
Can this product go on over existing laminate countertop? Don't you have to put a sealer on it? I really want to do my kitchen and bathrooms. Your videos seem to be so much easier and less steps than any of the others that I have seen. Where can I find information about price and ordering?
@LeggariProducts6 жыл бұрын
Yes you can put it over laminate. You don't have to put a top coat but we recommend putting one on. You can order from our website at www.leggari.com under the countertop or floor section. Take a look at our brochure. Thanks online.flippingbook.com/view/364043
@engr.ashrafhossenkhan57066 жыл бұрын
Thank you for making this video, whether it can be used on the board or used in CC, how much the ratio would be, if it was good to say pls am wait for your feedback
@LeggariProducts6 жыл бұрын
We use a 2-1 ratio, take a look at our brochure to see all the different applications. Thanks online.flippingbook.com/view/364043
@evolvinglovej52635 жыл бұрын
Do you offer a workshop class? If So where is the class held?
@lloydwallbridge_1216 жыл бұрын
Couldn’t possibly pick a favourite they are all so cool!! Can’t wait to start using epoxy. Do you do training sessions?
@LeggariProducts6 жыл бұрын
Yes we do training in Kennewick Washington. They will be posted on our website at www.leggari.com soon. Thanks
@PRSMtax6 жыл бұрын
Phenomenal! 2 questions: can we get this in South Africa?And what is the expected (or guaranteed) lifespan- on a counter, on a floor?
@LeggariProducts6 жыл бұрын
Our products are actually industrial coating made for military aircraft hangers, etc. So theoretically in a residential, or even commercial setting it will last forever. This is NOT a cheap epoxy paint that you will commonly find at box stores like Home Depot or sherwin Williams. It is a thick 100% solids epoxy coating. We are not set up to ship internationally right now, but we are in the process of setting up our international shipping. Check back with us in a few months. Thanks
@ironmanonaninja30256 жыл бұрын
Love the idea and the result but, my counters have the built in back splash. Will this adhere to the vertical part or just run down it?
@LeggariProducts6 жыл бұрын
Yes it will, take a look at the video. Thanks Back splash video kzbin.info/www/bejne/oYakq5yLe8iafJY
@ironmanonaninja30256 жыл бұрын
You guys rock.
@Paula-po9kx6 жыл бұрын
You make it loo so easy. What would happen if your countertop is not completely level? Mine isn't, the bar has a slight down side to it...
@LeggariProducts6 жыл бұрын
Our product is self leveling, you would be fine if it's a little uneven. Thanks
@tdkomape1946 жыл бұрын
Would you please tell me what are the products names from start to finish
@ohadraz19856 жыл бұрын
Hi guys, why didn't you torch in the end? Also what will happen if I torch the last sample with the spray effect? Will the effect disappear if I torch it?
@starboriqua496 жыл бұрын
How many ounces would you recommend for a small desk? I want to do a DIY marble vanity, as well as bedside table and shelves..
@LeggariProducts6 жыл бұрын
One gallon of our epoxy will cover 45 square feet. Thanks
@mohamedkamar72514 жыл бұрын
So great.l learn a lot from you .Thanks
@kevinboyd50573 жыл бұрын
I like the middle one
@peacepearlelikplimkwashiwo23266 жыл бұрын
this is amazing. want to learn more and actually make a carrier out of it
@LeggariProducts6 жыл бұрын
Hi, take a look at our online brochure. Thanks online.flippingbook.com/view/364043
@jerretgodhue56076 жыл бұрын
Do you need torch any of these
@LeggariProducts6 жыл бұрын
No you don't. We have a special formulation that helps with that and the self leveling helps as well. Thanks
@ericfalloutguy8467 Жыл бұрын
So the actuality do you pour or roll on countertop?
@roxxigirl13206 жыл бұрын
I have a backsplash that’s attached to my countertops. Can I still use this product to apply to them? If so how do I apply it?
@LeggariProducts6 жыл бұрын
Yes you can, take a look at our back splash video. Back splash video kzbin.info/www/bejne/oYakq5yLe8iafJY
@deemeyer29946 жыл бұрын
How do you work on a countertop with the backsplash attached?
@LeggariProducts6 жыл бұрын
Take a look at the tutorial video below. Back splash video kzbin.info/www/bejne/oYakq5yLe8iafJY
@lhusketh62396 жыл бұрын
What would happen if you did not brush over the colors but just left them as you poured them?
@LeggariProducts6 жыл бұрын
They would self level and stay in that area, it is a pretty cool look to do that technique. Thanks
@mahmoudalhaj33286 жыл бұрын
What was the last product you used for the last sample to make that effect? Thanks
@LeggariProducts6 жыл бұрын
We use denatured alcohol to give it a disbursing effect. Thanks
@KillingJesterPS36 жыл бұрын
How long does the sample kit take to dry completely?
@LeggariProducts6 жыл бұрын
The epoxy takes a full seven days to cure. Thanks
@Countdracula66 жыл бұрын
I would like to purchase your sample kit and try this out. What kind of board are you using?
@LeggariProducts6 жыл бұрын
Hi Indigo, you can order a sample kit from the link below. Thanks online.flippingbook.com/view/364043
@denizkadem61826 жыл бұрын
What are your paints? Is it metallic pigments?
@LeggariProducts6 жыл бұрын
We use metallic powder to add to the epoxy. Thanks
@denizkadem61826 жыл бұрын
@@LeggariProducts Thank you very much :)
@shannonattebery5406 жыл бұрын
They are all gorgeous but my favorite is the brass and coffee!😍😎
@LeggariProducts6 жыл бұрын
That's a great color combination. Thanks
@archhabib13596 жыл бұрын
Can you use ink color instead of the powder? If not, then whats the type/name of the powder?
@caroconga6 жыл бұрын
Is it possible to do a vertical surface?
@LeggariProducts6 жыл бұрын
We do not recommend this product for a vertical surface. We are coming out with vertical surface product in 2019. Thanks
@trainwon56996 жыл бұрын
I see you are using MDF board you don’t have prime it first? Thanks
@LeggariProducts6 жыл бұрын
We don't prime the sample boards but any finished projects we always apply the primer. Thanks
@landaraufu45825 жыл бұрын
@@LeggariProducts I don't understand what you mean by finished project? Do you prime the board before use or just didn't prime because it's sample display?
@cassiealesagapeinspiredcre8536 жыл бұрын
These are absolutely gorgeous! Could I order 2 sample kits if I'm not 100% sure what colors I want?
@LeggariProducts6 жыл бұрын
Hi, take a look at our online brochure and sample kit links. Thanks online.flippingbook.com/view/364043 leggari.lpages.co/sample-kit-ad/
@lorib12166 жыл бұрын
Are there fumes/smell/off gasing? I'm sensitive to fumes? Do you need to wear a respirator? The finished counter tops were gorgeous. Reminded me of watching painter Bob Ross, wondering what he was doing, till it was finished :)
@LeggariProducts6 жыл бұрын
You don’t need ventilation because this product is very low VOC (doesn’t smell much). Of course everyone has different tolerances, we haven’t had any complaints yet with smell. If you are sensitive to fumes then yes you can wear a respirator. Thanks
@franciscogavino80246 жыл бұрын
How much would i need for a counter top that is 4X8 .
@LeggariProducts6 жыл бұрын
One of our countertop kits will cover 50 sq. ft. Thanks
@maryyates53656 жыл бұрын
Francisco Gavino 2
@ly017826 жыл бұрын
will this epoxy resin also be suitable for porcelain?
@LeggariProducts6 жыл бұрын
You can apply our product to any hard surface, you would need to scuff it up really good to it will adhere to it. Thanks
@debbiesanders1446 жыл бұрын
Can this product be used on Formica Countertops?
@LeggariProducts6 жыл бұрын
Yes you can, take a look at our brochure to see all the different applications. Thanks online.flippingbook.com/view/364043
@ricardohernandez18175 жыл бұрын
Hi the samples kit are still available?
@LeggariProducts5 жыл бұрын
Below is the link for our sample kits. Thanks leggari.lpages.co/sample-kit-ad/
@lloydwallbridge_1216 жыл бұрын
Could you send a sample kit over seas to the uk?
@LeggariProducts6 жыл бұрын
We are not set up to ship internationally right now, but we are in the process of setting up our international shipping. Check back with us in a few months. Thanks
@DSM-76 жыл бұрын
What's the drying/curing time for this kit?
@LeggariProducts6 жыл бұрын
The product gets solid within a day but takes a full seven days to cure. Thanks
@marjangjokaj17975 жыл бұрын
How much can cost a piece???
@mosmad10926 жыл бұрын
How much cost will be to make 55 square meters house floor?
@LeggariProducts6 жыл бұрын
Typically the cost per sq ft for flooring including shipping and a top coat comes out to $2.25-2.75 per ft. For domestic US customers. Thanks
@Ironb146 жыл бұрын
He mentioned the quality of Leggaris epoxy....What is the difference in Leggaris epoxy resin compared to store found products? Is it food safe? And do you add a clear coat of the same 2 part epoxy or do you have a separate sealer in your kit?
@LeggariProducts6 жыл бұрын
There is no comparison because they don’t sell the same products. All of our resins are ultra refined industrial grade 100% solids resin that is a 2 to 1 mix ratio. We only use the best raw materials on the market when manufacturing our resins and Our Products have been tested for over a decade in real-life environments.Epoxy is extremely food safe. It is actually a go-to product for commercial kitchen applications. It has more of a sealed surface than even marble, granite, & quartz countertops which means it’s much harder for bacteria to grow on it. Bacteria likes to grow in the small holes of natural stone.
@CowboyGirl0076 жыл бұрын
Product looks pretty runny. How would I do the attached backsplash?
@LeggariProducts6 жыл бұрын
Take a look at our backsplash video. Thanks Back splash video kzbin.info/www/bejne/oYakq5yLe8iafJY
@Jianzhangwellness6 жыл бұрын
can I use it to paint my table? is this product safe?
@LeggariProducts6 жыл бұрын
Yes you can, take a look at our brochure to see all the different applications. Thanks online.flippingbook.com/view/364043
@مصطفىعبدالرحمنشويحنة6 жыл бұрын
The splendor of hands
@LeggariProducts6 жыл бұрын
They do help.
@afortuna326 жыл бұрын
Can I order more than one sample kit at a time?
@OHBINEY6 жыл бұрын
I really want to start your online classes and also order sample kit but am in Ghana . how do I order the sample kit all I see is USA
@LeggariProducts6 жыл бұрын
We are not set up to ship internationally right now, but we are in the process of setting up our international shipping. Check back with us in a few months. Thanks
@ra-yu4if6 жыл бұрын
What are the prices of the sample kit
@LeggariProducts6 жыл бұрын
The sample kit cost $18.99. Thanks leggari.lpages.co/sample-kit-ad/
@jamesbailey52184 жыл бұрын
learned a lot Great info
@LeggariProducts4 жыл бұрын
We're glad to hear! Thanks for watching the video!
@yadira4976 жыл бұрын
I want a sampler kit but don’t give me the option to choose the colors?
@LeggariProducts6 жыл бұрын
Email us at leggari@gmail.com with your order number and the two colors you want and we will put them in the kit. Thanks
@barbarawallace9056 жыл бұрын
Coffee and pearl is so pretty add a little of the copper would have made it pop
@LeggariProducts6 жыл бұрын
Yes that is a great color combination. Thanks
@ipeeinpools95225 жыл бұрын
@@LeggariProducts I'd like to try your product on one of my jobs. Do you supply in Ontario?
@edardonn20536 жыл бұрын
Awesome! Where i can buy those kit's?
@LeggariProducts6 жыл бұрын
You can order a kit at www.leggari.com under the floors and countertop section. Thanks
@amyliguori10096 жыл бұрын
Hi. Can it be done on granite?
@LeggariProducts6 жыл бұрын
Yes it can Amy, take a look at our brochure to see all the different applications. Thanks online.flippingbook.com/view/364043
@fredbush34046 жыл бұрын
I like the 3rd one
@aminesion95426 жыл бұрын
doesnt ship to Morocco..??
@LeggariProducts6 жыл бұрын
We are not set up to ship internationally right now, but we are in the process of setting up our international shipping. Check back with us in a few months. Thanks
@RD49x6 жыл бұрын
How much is a sample kit? I can’t find on the website
@LeggariProducts6 жыл бұрын
Hi, take a look at our online brochure and sample kit links. Thanks online.flippingbook.com/view/364043 leggari.lpages.co/sample-kit-ad/
@osamaosama-mq6er6 жыл бұрын
Please allow me to get these articles if they are located in Turkey
@LeggariProducts6 жыл бұрын
We are not set up to ship internationally right now, but we are in the process of setting up our international shipping. Check back with us in a few months. Thanks
@TyyDaymon6 жыл бұрын
The last one looks cool I go to you site for copper on copper with coper
@LeggariProducts6 жыл бұрын
Thanks Tyy
@brendamosal87776 жыл бұрын
I am seriously thinking about doing this on the floor in my large walk in closet and then if that turns out doing my bedroom. One question...is an epoxy floor slippery?
@LeggariProducts6 жыл бұрын
Not at all it's like walking on tile. If you end up ordering and doing your closet and floors send us pics so we can add to our gallery. Thanks