I don't think you actually need that chip reset device. *NOTE* I found this in the Service Manual. I have an Epson Stylus Pro 4000 and I reset it by holding down left, up, and down arrows while turning on. Then go to Clear Counters > Maintenance Tank > and Clear Tank. If it doesn't work the first time, it should work after doing this a second time. Best of luck to you all!
@condesystems11 жыл бұрын
Those menu options have been removed for the 4800 and the 4880 printers. Valid for the 4000.
@narinderpalsingh267710 жыл бұрын
Thanks so much for your prompt reply. Now, I know where to go.
@johnchardine188611 жыл бұрын
Great to know how to do this. Why buy a new tank when you can just clean the existing one out?!
@soulstories523210 жыл бұрын
hello, just wondering if i must have a chip reset device - as l have done everything else like you have guided - if i must where do i get one if living in Australia? cheers x
@leviteapparel3 жыл бұрын
Good info
@condesystems3 жыл бұрын
Glad it was helpful!
@condesystems11 жыл бұрын
You can indeed.
@luigitavarezklk0710 жыл бұрын
Hi, thank you for your tutorials have been very helpful, well I wanted to ask if you can help me with a problem I have with the printer, the LCD screen displays (ink low) try to reset the printer and I fill the cartridges but not the error is removed. as a way to fix this?
@condesystems10 жыл бұрын
Please check with your printer supplier.
@b44to110 жыл бұрын
Hi, Good video! What was the reason to remove ink cartridges before resetting tank? Can you do it without taking cartridges out? Thanks
@condesystems10 жыл бұрын
To clear all info, you take out the carts. It's not a huge deal, the ink levels will return after the first restart.
@dobernardes10 жыл бұрын
hello, is ther a clear counter for the Maint Tank for this printer?
@condesystems10 жыл бұрын
Not that we have found.
@narinderpalsingh267710 жыл бұрын
Hi vicky, I have just finished tank cleaning but the message of INK MNTTNK FULL is still there. Could you please tell me how to clear that messege
@condesystems10 жыл бұрын
You must have missed the end of the video! You will need to use the chip resetter to clear the ink mnttnk full message.
@aaronleiva28049 жыл бұрын
Narinder Pal Singh Resetting the maintenance tank on the Stylus Pro 4000The maintenance reset procedure for Epson Stylus Pro 4000. Turn off the printerHold down the three leftmost arrow buttons [left-arrow] [down-arrow] [up-arrow]Turn on the printerRelease the buttonsA new menu will appearPress the up/down arrows to get to the "Clear Counters" menuPress RIGHTPress the up/down arrows to get the "Maintenance Tank" menuClear the counter.Turn off printer.When you restart the printer, the maintenance tank should indicate 'Empty'Just remember to change it (or replace the wadding it contains)
@JavierJavisJAvis12 жыл бұрын
You can also with Kotex pads
@amirgeffen8 жыл бұрын
thx
@michaelbrakke450411 жыл бұрын
Can't you just buy a replacement maintenance tank?