How would I go about matching the color to of a pre existing print
@cheo1949Ай бұрын
Re print it using the same Printer, paper, ICC profile and setting?
@mariallknowing92738 ай бұрын
Epson ET-2750. Working perfect then mid print, started printing with no blue tones. I printed a purge in blue and it printed it purple. 😢. When I print the nozzle check, no problems and prints light blue lines.
@thomashobina72533 ай бұрын
My printer Epson L805 can't print PVC cards but can print other pictures clearly, what can I do?
@lintoncoke50942 жыл бұрын
Mr Rodriguez you gave me years ago a remedy for a printer issue that I had which was true matching colors. I switched from PS 2021 to now 2023 once I did that I lost the driver that you suggested it was not Q image it was something else but I can't recall what it was.
@dandee28 Жыл бұрын
could you please help me. I just bought a pro 300 but color comes out darker than epson 8500. How do i adjust the colors to print more vibrant and brighter? how do you adjust the color settings manually properly ?
@myronachtman43048 ай бұрын
What if the printer does NOT generate the "perfect" print right off the bat, as yours did? Now WHAT?
@melissamariea2 жыл бұрын
How do I collaborate my screen without buying one of those gadget things? I have a MacBook Pro.
@vandieseldesigns6 ай бұрын
Should I be letting Photoshop control the color profiles, or let the printer control it? I'm using a Epson F570.
@vanateecustomprints63994 жыл бұрын
Hello sir, I have come to you because you seem to be the most knowledgeable person on printers I have seen. So I must ask you a question here. It is about an HP K8600 ( its an older model). I bought this printer used on Facebook and it had bad print heads so I fixed it, and bought a CISS for it for $30.00 and it came full of ink which I wasn't expecting. I was so happy until I printed and all the colors are way off, my pinks look brown my teals look green, I don't know what to do... I figured I could change out the color management but I also use other printers and don't want to ruin all the settings for all of the printers so I am wondering if there is another way to calibrate colors so that they are at least in the right ballpark.... thank you
@thereefaholic3 жыл бұрын
I have issues where the printer simply ignores every setting and prints over saturated. Im not talking "in my opinion" Im talking blue suits are purple, flesh is red. Iven if I have photoshop saturation slider to make it a black and white photo. It prints color and over saturated. in windows it is set to no correct colors, in the drivers it is sent, in the epson software it is set and photoshop is set to manage the colors.
@shiftedperception93683 жыл бұрын
Can I calibrate the color on my Canon TS3522 printer or is it not capable of that? Thanks and kind regards. 🙏
@cheo19493 жыл бұрын
If you internal calibration like on the PRU1000 No it is not. If you an ICC paper profile Then sure you can. But you need a Spectrophotometer.
@shiftedperception93683 жыл бұрын
@@cheo1949 ok thank you for your response. 🙏
@Imagodeigen2 жыл бұрын
hi i started refilling my own canon 445 and 446 cartridges I have a canon mx 494 printers it was going well at first until I changed my refill ink to another brand. my question is does different ink produce differences in color. my other problem is my prints come out with a dull like the picture but the colors are right please give me advice
@ultraprimez2 жыл бұрын
Hi, i did my paper profiling with my 1yr old i1 Studio device + new ccStudio app on windows 10 Pro 21H2. My monitor (BenQ SW2700PT) is calibrated too. So i decided to print on my new Epson L1800 A3+ printer with paper profile. I set a new doc with no color management 8 bit and dragged a sRGB image in doc and i did the soft proofing with paper profile and prints didn't came as same as on screen. But when i use my old printer Epson L1350 with sRGB doc profile it and set no colour management settings for print its then prints come match to screen. What could be the issue. What should i need to do to fix this.
@cheo19492 жыл бұрын
Obviously both printers are not outputting close. You don't say what you print with. I would suggest you print a standard image with your newer printer. Letting the driver control color using EPSON paper choose ICM not SRGB. That is the worst choice. Chose the paper that matches the EPSON paper you are using. Not some other paper. And choose ICM are you color choice in the DRIVER. Tell your editing app to allow the printer to control color. Assuming your inks are also EPSON of course.
@ultraprimez2 жыл бұрын
@@cheo1949 sorry sir. I print in Nova PrismaJet Digital Plus RC Glossy Inkjet Paper and VMS Delux Matte paper. I also forgot to check if the nozzles are getting blocked. So i found it had issues. So i have a cleaning cmd and it got fixed after 6 to 7 clean up. Now nozzle check is working fine. I usually first do nozzle check before any kind of printing but this time i totally got excited about new printer and rushed into prints. My mistake i didn't noticed that.
@Mandy02102 жыл бұрын
I have epson l3216 how can i match colors plz help i getting mad
@cheo19492 жыл бұрын
Match colors to what??? You are either not setting the driver correctly. Your work flow is not correct. Or your display is not displaying images correct so you edit them and now they are even worse. The printer can only do so much. It outputs what you feed it.
@Mandy02102 жыл бұрын
@@cheo1949 actually i m facing problem. When. Setting to photo paper glossy with high quality.. greyscale image. Doesnt. Give me actual neutral greys. Which i see on. Screen.. it give s yellowish tint in greys... Very disturbing.. i want to fix this
2 жыл бұрын
Well, my photos print dark with Canon Selphy cp1200, and surely my monitor is NOT calibrated at all. But that doesn't matter at all! Why I hear you saying? Because I rely on the histogram! And the histogram tells me the image is correct. But it prints super dark, no detail at all in the shadows. So, I guess the problem is how Photoshop deals with color profiles. Do you have any advise on that topic and for dummies?
@cheo19492 жыл бұрын
Excuse but does that printer even allow the use of profiles? I've never gotten my hands on one.
2 жыл бұрын
@@cheo1949 I REALLU don't know. How can I find out? I thought the profiles were installed on the computer, NOT in the printer itself...
@TheKingOfPopVideos013 жыл бұрын
Hey Jose my canon printer prints dvds to dark how can I fix this problem? When it prints in my cousins epsom printer it prints normal
@cheo19493 жыл бұрын
In WINDOWS click the Color/Intensity Manual Adjustment box and once in the adjustment window, adjust as needed using the sliders in the driver. But you did not say WHAT Canon printer you are using.
@TheKingOfPopVideos013 жыл бұрын
@@cheo1949 canon mx922
@TheKingOfPopVideos013 жыл бұрын
Canon prixma mx922
@TheKingOfPopVideos013 жыл бұрын
@@cheo1949 that’s all I need to do?
@TheKingOfPopVideos013 жыл бұрын
@@cheo1949 so in printer preferences??
@phototec9 ай бұрын
Hi Jose, you provide great information in this video. I am a 75 year old Vietnam veteran, I now this is an older post, however I signed up to your Facebook group to get the test image you referenced in this video. Also, wanted to let you know that the link to: "Get My Special Pack of Standard ? Reference Images here" is broken, when I click on it I receive this error: This file has been deleted and it cannot be restored. Please contact the sender and ask them to upload the file again.
@nialoconnellphotography3 жыл бұрын
Hi Jose. I have a canon pro 300. When i print i am getting a magenta cast on a standard colour test sheet. I have disabled the printer colour/intensity from auto to manual in the settings but still get the cast. I have also tried disabling the lightroom colour management by checking the draft mode printing tab and put the printer colour/intensity back to auto but still get the cast to a varying degree. Am i doing this right? Or am i missing something. Hope you can help. Im sure it is to do with double colour management but the printer is new and im a complete newbie at this. Thanks in advance
@allysonhughes13 жыл бұрын
Did you ever get an answer to your magenta issue? I'm having the same issue with my Epson p800
@ef2b2 жыл бұрын
Is the bottom line here that a modern printer is so color-accurate "out of the box" when used with the manufacturer's paper that I can just trust the printed image as a reference? So, print one and tweak the screen? I landed here because I just set up a new Canon G7020 and was disappointed in a printed image (seemed pale) and very disappointed in a scanned image, which seemed to have lost most of the color of the original. But, then I stepped back and had no idea how to separate printer calibration from screen. I think you are saying to trust the printed image and start from there.
@satishvarma79234 жыл бұрын
sir is there any software to do correction and print 800 prints 4x6 size without photoshop just like we were doing in mini lab just clicking -1 or +1 or +2
@cheo19494 жыл бұрын
Not that I know of.
@EdwardKilner5 жыл бұрын
Excellent video, thanks. I do so little printing that I tend to forget good practices. But, at least my monitor is calibrated and room is dim.
@cheo19495 жыл бұрын
Perfect consistent conditions is everything.
@FirstLast-tx3yj4 жыл бұрын
@@cheo1949 i have a cannon g2500 i know it is not the best printer but the colors are very poor and not saturated. Is it the ink or the printer itself?
@caltari5 жыл бұрын
I'm in 100% agreement with you with monitor calibration; custom paper profiles and working in a dimly lit editing room. I have a question regarding Qimage Ultimate Unclog Schedule Tool. Does the Qimage program have to be constantly be activated and or minimized for it to do the scheduled printing or will the program automatically launch or activate by itself. Lastly, can my computer be in a sleep mode for the unclog schedule tool to work. I'm leaving the country for a month and don't want to come back to a clogged printer head. Thanks in advance. Mahalo
@WillyVLD5 жыл бұрын
caltari I got it set up that Qimage is in the background and my computer can be asleep but i set up a wake up action on the computer to wake it up 1min before the print is scheduled.
@caltari5 жыл бұрын
@@WillyVLD Great idea; thanks a million!!!
@SilviaLopez-zu2ef2 жыл бұрын
Hello I am new in your channel, and I have a question. I have this dilema lol, I boughf an Epson wf 7840, but the only think i saw bad was the size and weight...loved it though,....but then I thought maybee the Ecotank 15000 would print better, but that printer comes out to just under $700, dollars, but the ratings are better for the less expensive Epson wf 7840 than for the Ecotank 15000....wich one would you kerps???...thank you.
@cheo19492 жыл бұрын
Price has no direct connection to quality here. The Eco Tank prints will cost a lot more at the beginning because ink refills will very cheap and in many cases you can switch to 3rd party inks due to these printers not using chips. Look at what colors are included in the stock ink set. 4 is so so. 6 is much better.
@SilviaLopez-zu2ef2 жыл бұрын
@@cheo1949 you mean, as in when purchasing a new set of different ink colors???...cause the one set that came with has CMYK color bottles.
@SilviaLopez-zu2ef2 жыл бұрын
@@cheo1949 ...and to, when you say "third party"...you refer another business that sell other types of inks that are compatible with Ecotank 15000?
@SilviaLopez-zu2ef2 жыл бұрын
@@cheo1949 will using third party inks run the risk of voiding the 4 year warranty i bought for it????
@SilviaLopez-zu2ef2 жыл бұрын
@@cheo1949 just one more question, that i almost firgot,....if i allready put the regular inks in the printer, can i use other inks including "sumblimation" inks on it?....or ones i have put these regular inks, ...it's too late to use sublimation????
@stephenstevenson19005 жыл бұрын
Sage advice Jose. Hope you feel better soon my friend!
@cheo19495 жыл бұрын
Thanks buddy.
@caltari5 жыл бұрын
I just started to do a water and Windex flush of 8 CLI-42 cartridges I bought on Ebay. I just completed two cartridges and the issue I'm having trouble with is the 60ml syringe, when I fill it up with Windex to flush out the cartridge, the rubber seal gets harder and harder to slide easily on the inside wall of the syringe to the point where the rubber seal gets pulled off the plunger. I have two of these 60ml syringes and the same thing happens to both of them, very frustrating; so for now I've stopped flushing out the other 6 CLI-42 cartridges until I come up with a solution or a suggestion that would address this problem. I'm sure it's the Ammonia causing the friction. Anyone else experiencing this problem and have come up with a solution? Thanks in advance.
@cheo19495 жыл бұрын
I have not experienced that problem when using Windex and wonder if it is due to specific syringe plungers. Ive had it happen after MANY uses on my smaller volume syringes. Bit not until much use.
@caltari5 жыл бұрын
@@cheo1949 Thanks for the reply. I think I have another solution, which I'm going to try tomorrow. You know the catheter tip that comes with the 60ml syringe that fits perfectly and snugly into the refill hole. Well, I glued the catheter tip to a condiment squeeze bottle with Gorilla Glue. I'm 99% sure it'll work with no more issues with the rubber seal getting stuck. Now I'll be able to flush out the remaining 6 cartridges without getting stressed; LOL. Oh yeah, I thought of another idea of buying an aquarium air pump with a dual oxygen port; hookup two 4 Aquarium Oxygen Air Flow Splitter for a total of eight and gluing the hoses to eight catheter tips and insert them into the refill port for faster drying time. What do you think; go or no go? I'm lazy and impatient; LOL.
@WillyVLD5 жыл бұрын
@@caltari Not an refill expert, but there are syringes which have only the hard plastic part, so not the rubber part. Perhaps the rubber is reacting with the Windex which will not happen with the syringes which I mentioned.
@michelerampazzo5 жыл бұрын
Sorry Jose, only a clarification: you calibrate the monitor at D65 as standard. correct? (why not D55 that the white point is more yellow and than more near at paper white?)
@cheo19495 жыл бұрын
I know it sounds strange. But prints are usually viewed under 5000k lights so that is why profiles are D50. Monitors are calibrated at D65 or daylight. Trust me, don't let that confuse you.
@michelerampazzo5 жыл бұрын
@@cheo1949 Many thanks Jose, I trust and listen you!
@HendraLauw5 жыл бұрын
Hi Jose, what are those paper to your right? The blue colour stack. Thank you.
@cheo19495 жыл бұрын
It's Canson Artist Watercolor uncoated paper.
@HendraLauw5 жыл бұрын
I see. Thank you Jose for sharing your knowledge.
@cheo19495 жыл бұрын
Not a problem.
@zing9139455 жыл бұрын
@@cheo1949 I printed some 12 x 18 Aquarelle on my pro 100 yesterday. Great paper !!!
@ninadkesarkar66953 жыл бұрын
Hey Sir, love from India, Your video helps me a lot its helps me to improve my print calibration. thanks a lot, Sir, God bless you always.
@barbarabenedict30223 жыл бұрын
My sample of your photo will not go to 8.5 x 11
@laladamac6 ай бұрын
Thank you
@KlovesD_20155 жыл бұрын
Great video! Thank you so much for posting this. What scanner do you use?
@ansongabriel86233 жыл бұрын
not sure if you guys gives a damn but if you guys are bored like me atm you can watch pretty much all of the new movies and series on Instaflixxer. I've been watching with my gf for the last few months xD
@dexterishaan20933 жыл бұрын
@Anson Gabriel yup, I have been using InstaFlixxer for since december myself :)
@besttourinrio93 жыл бұрын
Great video ! Right at the point! Thank you Jose!
@zing9139455 жыл бұрын
I'm going join your face book page and load your calibration image ! What an easy calibration ! I'm going to test my pros against Canon OEM the new precision SE and the German inks. I'll try the German again first since there was a mix up with my precision order. I'm retiring and moving in the next 10 months and Ill have a much larger space for printing. I'm either going to go all the way with a canon 1000 or get the pro 10 leaving more in the budget for ink and paper ! And Happy Printing back at you !!!
@cheo19495 жыл бұрын
Congrats on your retirement. You will love that PRO1000 It is demanding but man....the results make you forget all that.
@tomasfbenvenuto5 жыл бұрын
Hi José! Do u speak spanish?
@cheo19495 жыл бұрын
Yes I do. Pero prefiero ingles para que el resto conprendan.
@tomasfbenvenuto5 жыл бұрын
@@cheo1949 Estaría bueno si pudieras agregar subtítulos en español a tus videos para los que estamos algo cortos de ingles 😅. Te felicito por tus explicaciones y te mando un saludo desde Argentina
@cheo19495 жыл бұрын
Seria imposible para yo solito traducir mis videos l. Tengo mas de 1300 videos.
@tomasfbenvenuto5 жыл бұрын
@@cheo1949 ah comprendo, son muchos vídeos! Seguiré con la traducción automática de KZbin en ese caso 😁 Gracias!
@tobiasdk855 жыл бұрын
Thumb up for the hairy-joke :D
@cheo19495 жыл бұрын
I knew you'd like that.
@rachelsremedies26023 жыл бұрын
jose geez all you do is talk, talk , talk!!!!
@cheo19493 жыл бұрын
Yes I do and I bet you loved it and learned something! By the way there is a treatment for short attention span.