Epson Workforce WF-2630 Printer Disassembly - Taking Apart for Parts or to Repair WF-2530 WF-2540

[@ravraid]

This sort of video is so useful. It really encourages me to dive in deeper. Thanks!

[@CanadianDiscountDiva]

My paper is not feeding into the printer at all. It catches on the middle (white partial gear looking piece), crinkles the paper and then tries to feed on the right side where the roller is then jams before even entering into the printer. Any ideas? I have tried with regular print paper as well as a thicker paper (card stock). Nothing is inside where the paper feeds, and the parts seem to move freely where the paper feeds. I have the WF-2630

[@alisarahryder8094]

Thankyou 🙌 found what I needed x

[@elizabethblood8356]

How do I reconnect the wires on a wf-2630 when I'm putting the scanner back on the printer

[@bobbymcaullay9129]

Excellent

[@303electronics]

Thank you! Cheers!

[@ruthmcgill1030]

Hi Looking for some help with this printer. It keeps saying paper jam and I have figured out that the paper release catch behind the ink cartridge bed doesn't pop back out. Any help would be grateful. :)

[@303electronics]

Hi. Could there be something in the way of the tray?

[@lordbow]

Great video. I messed up and disconnected the small ribbon cable that goes behind the printer head cart (the black cart riding along the rail). Is there a way to remove the cart and reinsert the small ribbon cable?

[@303electronics]

Hi. This video ashould be able to help you with reataching the wire. I hope it does. Have a great weekend! kzbin.info/www/bejne/Y5y8dIlvdsiEhs0

[@lordbow]

@@303electronics thanks for the link. But I’m that video you leave one ribbon cable connected, which is exactly the one I took off and can’t put back on. I don’t know how I can get it back on.

[@lordbow]

@@303electronics I was able to reinsert the small ribbon cable that goes behind the print-head cart. In the video you linked me to, you removed the left panel, exposing a small hole in the metal rail. I pushed the printer-head cart all the way to left and used some eyebrow tweezers to insert the small cable back into its housing. It was difficult but do-able.

[@яимойпринтер]

kzbin.info/www/bejne/l3vWh2OClNl1m8k

[@bethannrau]

Yes, taking off the left panel and one small piece provided a hole just big enough to make it doable to reconnect this wire. Thank you @lordbow for the instructions!

[@MrMike5880]

What parts do I need to remove to access the main logic board ?

[@juliusdichosa8178]

I accidentaly pulled the small wire ribbon behind the printhead along the rail. Any suggestions on how to plug it back in? The space is really tight back there. Any help would be appreciated. Thank you!

[@303electronics]

Oh no! See this video, it may help. You may need to remove the printhead partially. If the printer is not seeing any error, I would not mess with it. kzbin.info/www/bejne/Y5y8dIlvdsiEhs0

[@jessicachavez3184]

I disconnected the cable that connects the scanner and I don't know how to connect it again...

[@303electronics]

There could be a clamp if the wire is not holding in the slot.

[@mixedmeteor]

was there an internal battery? my 2630 always asking if I want to reset time and date, why is this always resetting?

[@manumanu-ck4pp]

y como la vuelve a montar??? mi tapa arriba del scaner no entra....