PARKSIDE Performance Brush Cutter Problem Solving using Poxipol Epoxy Adhesive

#ErCanEverything #Parkside #Performance
💥In this video I found the problem in the brushless motor of the PARKSIDE Performance Brush Cutter, where the neodymium magnets had come unglued.

[@legotechniccreationsbygisu7487]

Your genius, And PARKSIDE quality has to improve don’t know how they make money with their five year warranty when every second tool I have already had to be replaced.

[@Stisl_exot]

Anyway, thanks for the video. I'll save it in case someone in the Czech Republic has a similar problem so I can refer them to this repair. And I'm giving it a double like!👍

[@oweckayx]

Nice one. Are you just buying these tools as non working to repair them and reselling/giving it away? Or are you directly repairing stuff for other people? I have the same hobby - I love repairing stuff so everything that is broken I will find a root cause and try to fix it/improve it. :-) So I really really enjoy your content! Thanks for being this good at it. :-)

[@ErCanEverything]

This is a from flea market which I bought it for €20 and it worked. But after a long mowing, this happened and I decided to repair it. I'm buying them cheap and if they don't work I try to repair them and when I have more I sell them.

[@AntonioOliveira-xj5om]

I loved the safety and protection of the boots! Ah, ah, ah, ah... ❤❤😂😂😂

[@kyazimismet1906]

Браво комшу уникална идея

[@fatihaydin52]

Do all malfunctions find you 😂

[@DarioBattiston]

you are a genius friend!! my video on the new brush cutter modification will be out soon 😉😉😉🔝

[@TruckerJozef]

Good repair 👍

[@memutu]

Nice one, but what was the point of making that bushing over the rotor? A clutch or something?

[@DjaniAgain]

I'm curious also. It looks like some clutch, atleast on the video. Looks like some magnetic coupling going on there. 🤔

[@ErCanEverything]

Bushing is designed to keep the magnets from flying around due to centrifugal force and must be stationary in the rotor.

[@ErCanEverything]

It's just from the temperature or the vibrations that they came off

[@audiomaster691]

The magnet holder together with the rotor must be a removable coupling type. Clutch type. A thick washer of textolite, rubber or teflon can be placed between the magnet holder and the bearing

[@MacStrange]

Well done dear friend

[@nelchan2421]

awesome

[@AbdulAZIZiSLam50M]

বাংলাদেশ 🎉❤

[@Stisl_exot]

Parkside is like a Trabant, repairs are done literally 'on the knee'.

[@pawelw.9172]

parkside is such crap... but you shouldnt have use epoxy but a loctite flange sealant, 638 or sth else depending on the gap....

[@RahatChowdhury-jr3xg]

fast coment

[@Jultsu]

Now wait for the controller board to let out the magic smoke. This model in particular is a horrendous piece of crap.

[@MegaMorini]

Rendes mukát végezni benzines gép kell.

[@beycanali]

🗑🗑🗑🗑🗑

[@andymora5595]

If you buy a lot of very cheap Parkside products, you have always something to repair ;) If using other more expensive brands, you would have less work :)

[@igormanja]

I bought a used trimmer as if it was working and it didn't work, I tried everything and everything and I can see that it spins in empty, what a way you explained very well how to fix it. This is not the first time you have helped me indirectly with repairs, thank you! 🩵