Karcher Pressure Washer Repair - Replacing the Oil Seal (Karcher Part # 6.365-393.0)

[@rogeraston6740]

I changed mine and what I did was to heat the assembly slightly with a hot air gun to expand it and then the seal came out and the new one went straight in. Because its aluminium it soon expands...I had some plastic pipe of the same size so it went in straight...

[@lifeisthepittz]

Thank you for the informative video!!

[@timobrien-h7z]

great help step bye step

[@MIXMASTERRONEDEE]

What are the newton meters torque specs for the bolts or is it German for goodntightmate 😂

[@swd6430]

What is that tool for removing oil seal?

[@simonmadden691]

Very helpful

[@jazziespaz]

Hi, Does this pump have a unloader valve? I don't see the location on the outside of the pump like others.

[@bobsoft]

Its located under the TRV where you see that black plastic part 1:52 remove that and unscrew the nut with a 19mm

[@graciemurphree8653]

the uploader valve can be hard to pull from the pump. it sits down in the pump and has a small "knob" on the top but its hard to access. I could not get needle nose pliers to get enough grip to pull the valve but I took a grinder and ground down the tips of the pliers about 1/4" inch. This allowed me to get more grip on the valve and it pulled out easily.

[@charlesoverton]

i need that tool.

[@satheesraj1477]

I need this oil seal 3 number

[@russelramnarine1643]

Could the oil seal cause pump to leak water

[@BgpYoutube-ne6so]

"now I can remove the pump" Easier said than done in my case

[@whowhatseams6296]

what tool are you using to install

[@richardbarclay6320]

Yes...good question....how about answering it karcher

[@MIXMASTERRONEDEE]

😂hahahahaha wouldn’t you like to know 😅

[@hardan.kazem81]

Good

[@russelramnarine1643]

Or could it leak oil an water