Yongnuo YN685 Review: TTL HSS Walkthrough Flash For $100 Bucks

[@Eric_Rossi]

To me this YN 685 is well worth the price and I highly recommend it. But the more manual flashes are a bit cheaper and worth it as well! Buy the flash here: Bhphoto: Nikon- bhpho.to/2tb9sqP Canon- bhpho.to/2tbFS5d Amazon: Canon- amzn.to/2tbsRs7 Nikon- amzn.to/2u5khrn

[@dinges99]

Eric Rossi hey! I have a question; I can get this flash (new) or the Nikon SB-800 (used) for about the same price.. Wich one do you recommend? Thank you!

[@antoniomarroquin3649]

Hey Eric , can I use this flash with canon 6D ? I saw the descriptions on Amazon and on the compatible list the 6D is not there ..

[@victoralfonsocabrera2965]

What do you recomend This yn 685 or yn 660

[@Eric_Rossi]

Id go with the SB800, sorry just seeing this. These comments dont always pop up.

[@Eric_Rossi]

you can, just make sure to get the Canon model. I've put it on the 6D Mark 2 and 5D Mark IV

[@douglas.barbosa]

Thank you! This video really explained the use of the YN685 TTL HSS flash with the YN-622C-TX controller. Cheers!

[@Eric_Rossi]

Thank you, glad it did!

[@colblimp]

Another great video Eric, you're my go-to for gear reviews now. I'm going to buy this flash on the strength of your review - it'll be perfect for the clothing shoots I do.

[@Eric_Rossi]

and its an honor, I appreciate you enjoying how I review things. Its well worth a buy, quality is high end for the price point and its features

[@ShannonPeterSVP]

Went to the store. Had the 560IV, 660 and 685 laid out. Picked up the 685, thanks to you! Now, I hope I'm able to do justice to the images I plan to shoot.

[@Eric_Rossi]

congrats, an awesome flash for the price!

[@ShannonPeterSVP]

Thanks, Eric! I'd be happy to share a couple of images that I took using the flash. It's pretty neat.

[@uvejsdodachanel]

I used this flash with controller, is fantastic flash...andd never overheats.

[@markharris5771]

I have two of these and use them with the Godox 960 and 820 external power packs, massively cuts down on recycle time and you can use them all day no problem. Superb for me, but I'm not a wedding photographer and the most images I've had out of them in a 16 hour period is about 1200 images and that was very much a one off. I'd recommend them, and experience says they are pretty tough too (I'm a very clumsy person). I like using them with the Godox umbrella soft box with tracing paper as an extra level of diffusion, you can get some beautiful soft light from them. The yn622tx also fires the yn622 so you can use the yn622tx to trigger older speedlights on a different channel or (as I do) trigger cheaper studio strobes in conjunction with your yn685s. Great review, can't disagree with a single word.

[@Eric_Rossi]

yeah Yongnuo and Godox makes pretty good flashes imo

[@thiago3dia]

Mark Harris I just picked one and it overheated before 2 hours shooting in TTL. Already happened to you?

[@faizrehman6159]

Hi Eric, after watching this video I just bought Yongnuo 685. Its a lovely flashgun and I have done a couple of weddings with it. Thanks for the review. Love

[@Eric_Rossi]

thank you and glad you enjoy it, for the price, its an awesome flash!

[@jordanthephoto]

So awesome Thank you so much!!! finally decided to get this flash!

[@Eric_Rossi]

anytime!

[@kimfoto_561]

Hey Eric, just saw the video-awesome! I'm looking at my YN685s and when I go through the menu there is no "signal" choice only the "slave indicator". I've been using Yongnou transmitters/receivers to sync my units. Do you think it's an older version?

[@Eric_Rossi]

I think you mean signal like the channels the wireless flash triggers connect with? Would that be what you mean?

[@kimfoto_561]

@@Eric_Rossi Right about 3:21, you say the "signal option". On my flash there is no signal option.

[@AftabAli-gm7fr]

Hey Eric!!! I have a question for you in regards to my DSLR camera and lens issues. I'm a relative beginner with a little hobby for taking pictures so I apologise if my questions sounds relatively dumb or stupid. So I was hoping if you could clarify it for me. Right I own a Nikon d7200 for over a year now. And I've been purchasing second hand lenses to try out different things. Now, I was really interested in Astro photography so I did my research and considering I'm on a budget from my part time job i bought a Samyang 16mm F2 lens. Now the issue I'm having with this lens is the first error code you covered in a previous video. The fEE error. Now your 100% right about the fact that if you switch it to maximum aperture the lens works. However this is my questions. What if I want the lower aperture?? Now this maybe a silly question and I did my research online and people said that you can manually adjust the aperture from the camera whilst leaving the lens at f22. Okay but what i wanted to know is how is that even possible to adjust the aperture from the camera. When you physically turn the aperture ring to a lower F number you can see the blades open so as to allow more light to enter. But the blades don't adjust when you manually change the aperture from the camera dial do they? Or am I wrong? I do adjust it and listen for a noise but I can't hear anything. I'm not even sure if I've explained this correctly so if I haven't let me know and I will explain. Sorry about this. Any input will be appreciated. Thank you very much Eric

[@kleanthisXenophontos]

I had the same issue with my Nikon 50mm f1.8. turns out that what you see in the viewfinder is not what will the camera take. the blades do close. Having said that i am not sure about your lens but try it out on some shots with aperture wide open and closed and see what comes out. my 2c

[@mikeryan3968]

Thanks Eric regards from South Africa

[@SidBonkers51]

Might get one of these just for the high speed sync function. Ive used the Yongnuo YN560 Mk lll's for a few years and recently added a YN 560TX transmitter which is great too. Also have an old YN560 Mkll and even a YN460 slave unit too, both still working perfectly, no idea why anyone would pay 4 times as much for a Canon/Nikon Speedlight. Great video Eric.

[@Eric_Rossi]

thanks Sid, yeah its a cheap price for HSS that works.

[@MohammadBarghamadi]

Hey Eric. I bought this flash after watching your video and I like it. The only problem I have is that it's really hard to get it on the camera and even harder to get it off. I feel like on of these days i'm going to ether break my new D850 or the YN685. Is your copy like this too or there is something wrong with the one i have?

[@Eric_Rossi]

Awesome! Hmm I havent heard of it having a tight foot, not to ask a dumb question, but is the foots lock partially engaged? Have the metal prongs of the hot shoe on the D850 bent a little inward?

[@MohammadBarghamadi]

Eric Rossi I unlocked the flash before putting it on the camera, but it's really hard to push it all the way in. however video lights get mounted really easy. the flash is amazing, but i think i got a bad copy. i can't find a video on KZbin where someone puts the flash on or takes it off to be sure if i got a bad one. thanks for responding btw.

[@M109RIDER1]

Was just wondering if you were going to make a video setting up the hss? I bought this flash and the 622 TX for my nikon d750 and I'm having trouble figuring out how to set up the hss. and I really enjoy your videos by the way.

[@Eric_Rossi]

Yup I will try to soon in the next few weeks! Just some gear and topics I need to catch up with first but yes its on the list

[@M109RIDER1]

Thank you because I can not get mine to show hss at all. I've done everything I can think of!

[@alphous3777]

Bradley Curtwright does this flash work without transmitter. It only with built in flash on Nikon?

[@Poupou1057]

Thank you Eric!

[@isabelbeltran-rangel6162]

So if the 560 is a bit older, why do you prefer that over the 685 which is larger and newer?

[@tonytfuntek3262]

Presently I'm using the 2 YN 560III with the YN560-TX. My question is can I use the YN560-TX with the YN685......OR....WIll the YN622N-TX operate my YN560 III ? Nice review, Thanks

[@Eric_Rossi]

Natively, i dont think they are.

[@brightsparxxx]

Hello. I presently own 2 YN560III, 1YN560IV and a YN685 for Nikon. I have used the RF603II (just like Eric) as well as the YN560-TX for all of them. Of course I got the YN622N-TX to have it fully compatible with the YN622N-TX for HSS. When using the 560-TX, change the mode to 603 slave. But to answer the latter part of your question, I agree with Eric that the YN622N-TX does not natively operate the YN560III or IV.

[@tonytfuntek3262]

Thank you guys, good information.

[@simonwalter7142]

Great review. Thanks again!

[@Eric_Rossi]

glad to help man!

[@simonwalter7142]

I asked this question on your 660 reveiw by mistake, but I should have asked it here (sorry about that): Which transmitter do you recommend for the YN-685 that controls the HSS function? Or does it work from in-camera?

[@Eric_Rossi]

the 622 like mentioned in this video!

[@simonwalter7142]

Thanks!

[@thephotovideoshow]

Looks like a good flash! I hope they make something with HSS for Fuji soon!

[@Eric_Rossi]

The other manual flashes will work but yeah i dont think they will sadly

[@christosphillips3568]

Great video Eric, good product review I was considering adding at least 2 flash units in my gear I think this is the right one for me. great price too. Kudos bro nice presentation ......Oh and BTW, these flash units look so good on that Nikon of yours. Waiting for your Canon 6d mark II specs comments. (No 4 K and single card slot).....Give us your view.

[@Eric_Rossi]

Once its fully announced I'm going to make a vid on it, they keep adding one or two things. It'll be a popular camera so I want that to be 100%.

[@christosphillips3568]

Eric Rossi wisely so bro well said

[@VictorManuel-qp6fg]

Hey Erci thanks for this video. I would like to see the video about the HSS!

[@Eric_Rossi]

thanks, ill do my best to make one soon!

[@markchenoweth4748]

Yes I tried both auto zoom and manual. As well as different metering modes. I really wanted this to work. A few others have had similar issues after I googled it. I shoot canon. Happens on both 5Diii and 6D. Thanks for the reply.

[@Eric_Rossi]

hmm I havent heard much, maybe its a flaw with the unit

[@timrosenthal46]

I just bought 2 for $300 AUD, I really like them.

[@Minavlogs]

thanks so much

[@Eric_Rossi]

anytime!

[@berniestang2616]

My flash at tines beeps and the back screen show P.L. & wont fire . Yes it is mounted correctly ANY IDEAS ??

[@sidvicious3129]

Hey Eric this was right on time for me, you are the man!!! I'm getting ready to buy in two weeks, I was looking at getting 2 of these with the same trigger as you have. The one thing that you might have forgot to mention and I'm sure you will cover in a later review is the HV port on the side. There should be a regular sync port as well. The HV port allows you to use an external battery pack, with the flashes and it might bring the recycle time down to 1 second. The way the Battery pack works is it controls the power and the batteries in the flash control the display. I was looking to buy a used sb800 or a sb910, skipping the sb900 because of the heating issues. Where there any heating issues with the Yongnuo? Thanks for doing this Eric and do some more research on that HV Port. Thanks and I'm looking to get the Bolt Cyclone DR PP-400DR Dual Outlet Power Pack, which will power two flashes.

[@Futile_Soundscapes]

Hey Eric, love Your vids, especially this one about the yn685, because I just bought 2. In this vid you tell us there is a separate vid where you work with the yn685 in HSS. Where is that video? I can’t find it. Please share me the correct link. Thx 🙏

[@Eric_Rossi]

Sadly that video never got made lol. I never had a chance to get to HSS. I'll write it down and see if I can work it into a feature video. Sorry about that

[@hueyhuuhieu]

So which one is better this one or the 660?

[@Eric_Rossi]

All depends on what you are looking for, mainly if you need HSS

[@javier_alba]

Which it's better in your opinion, the 660 or the 685? You seam to be more exited about the 660 based on your video review. Thank you.

[@Eric_Rossi]

All depends if you want ttl or hss, if so you need the 685. If not, I like the 560 4

[@antoniopetrovski6203]

Excellent video bud thanks. Just a quick question though? This YN685 dos not need transceiver for using it off camera for HSS? if I understood correctly

[@Eric_Rossi]

You do need both the trigger and flash to have HSS for it to work.

[@chenrithmorgan8544]

Thanks for this video... Would hss works when this speedlight is mounted on the camera?

[@harispap]

I have the same question, if someone find out answer us please

[@khalidwalid3807]

Your videos on Yongnuo flashes are very informative. Do you know if there is an external battery pack to use with YN685 to help with faster recycle?

[@Eric_Rossi]

I cant 100% confirm, but it says it should for the 685. Look up the Bolt CBP-C1 Compact Battery Pack

[@piotrwydmuch9413]

Hi Eric, awesome review. thank you! Can the YN685 be used mounted on camera and work as a master to trigger off camera flashes? there is a lot of reviews and some people talk about compatibility issues with some other Yongnuo flashes/triggers. Thanks again

[@Eric_Rossi]

Yes but depends. It depends on the settings of the other flashes if they can be set to slave. This flash usually is off camera and triggered by something else on camera, like a yongnuo flash trigger. It supportd for the YN-622N & RF-603/YN-560.

[@youneshachicha789]

Amazing videos , really nice and detailed! But I just bought this flash and can't really seem to put it in optical slave mode! Can you please tell me what to do? Or is there any solution for off camera triggering without a transmitter like yn622c-tx ! Thanks

[@PeeJayBrownJr]

I used to use Yongnuo speedlights until they started failing and overheating on me. I had 4 of them but eventually they all started failing. I switched to the Godox v860ii which have been amazing and much more reliable. Built in transmitter/receiver and TTL as well.

[@Eric_Rossi]

Interesting, never heard of a ton of issues. But Godox is another decent brand, but I havent had much luck with them actually lol.

[@fjcvideomarketing8617]

Great information well done

[@Eric_Rossi]

thank you!

[@Zed_is_dead-999]

Thank you my dood! ! I appreciate you

[@Eric_Rossi]

anytime!

[@allabouthim03]

these 3rd party flashes are great and a killer deal. on my channel I did a comparison of flash zoom head noise. I purchased a Shanny flash to use with a cheap external power pack for wedding and I was a little disappointed at the high pitch sound it makes when the zoom head moves. all my Nikon flash heads are pretty quite, at least they don't make that high pitch sound. I still love my Shanny, power house, flash but will not be using it for a wedding ceremony. maybe you can do a sound test with your flashes.

[@Eric_Rossi]

I normally dont move the zoom head a ton, but even if its loud I dont think its that big of deal. I normally just set it and forget it. But yeah some of these make some noise!

[@alexanderschermer7736]

Good job. How do I set HSS for Nikon?

[@Eric_Rossi]

you set it on the flash and the wireless triggers

[@legvalmont]

Do you have anything to say about the AF assist lamp? Does it bother you or it doesn't matter?

[@Eric_Rossi]

I turn it off

[@ChuckyBrideHobita]

So what do you suggest at the end for begginers and low budgets.

[@Eric_Rossi]

Depends, do you want a manual flash? One thats automatic and does ttl? Whats the budget?

[@ChuckyBrideHobita]

@@Eric_Rossi honestly I know nothing I just started classes

[@Eric_Rossi]

what camera do you have?

[@ChuckyBrideHobita]

@@Eric_Rossi Canon 750 D and thank you so much

[@Eric_Rossi]

check out this flash: www.bhphotovideo.com/c/product/1187134-REG/yongnuo_yn685_wireless_ttl_speedlite.html/BI/20259/KBID/14674/kw/YOYN685

[@parasaryal9373]

Will it work on my nikond7100?

[@Eric_Rossi]

yup!

[@parasaryal9373]

Thank you.

[@timothyb175]

thanks for your videos. very informative. question, is this the best flash for off camera HSS in the Yongnuo line?

[@Eric_Rossi]

yes!

[@bendeibert]

Looked to see if this was previously asked, but did not see it... Can the YN685 trigger YN560IV flashes? I have three YN560IV flashes and love how easy they are to use, but was frustrated by not having the focus assist for low light. I bought the YN685 thinking that I could use it on my camera as the transmitter on my camera to trigger the YN560IVs as receivers, but am having difficulty figuring it out.

[@fotowandelenmetguido1847]

Hey man great review! Is this also compatible with the nikon d700?

[@Eric_Rossi]

yes it is!

[@1HeavanlyFlower]

Sorry if this is a silly question but do I only need 1 Yongnuo YN-622C-TX-E-TTL wireless flash controller to put on my Canon 5d Mark IV to control 2 Yongnuo YN685 GN60? Or do I also need to get 2 of the Yongnuo YN-622C wireless ETTL flash trigger receiver transmitter transceivers. Sorry I just want to be sure I don't buy more than I need or less than I need. Thank you so much. Shelly

[@Eric_Rossi]

correct, the trigger is built into the 685, so you only need one for the camera!

[@douglas.barbosa]

@@Eric_Rossi Awesome! Thanks!👍

[@caroldavis5921]

Eric, I just want to confirm.... if I have the 622n-tx on my camera body, it will remotely control 685's without the 685's being on a trigger or receiver? Thanks for your help!

[@Eric_Rossi]

correct, the 685 has a built in receiver

[@darrelljohnson7052]

Waiting for your Yongnuo 968n Flash review!!!

[@Eric_Rossi]

I think I'm going to pass on that one. I spend my own money on these flashes, but the 968 is getting awful reviews. So I'm not going to take a hit on that one.

[@darrelljohnson7052]

Eric Rossi --- gotcha, thanks for info.

[@Eric_Rossi]

anytime!

[@yousinglikmanchester]

Hi Eric, hi guys, great review! I'm planning to buy this speedlight but I'm just a little concerned as on the Amazon description my camera it's not mentioned between the compatibilities. Would that work with my Nikon D800 if I use it off-camera with a 622N-TX transmitter ? I really need it ! Thank uuuuu !

[@tavipauna]

quick question. How do I set the 685 to slave mode? I m not talking about the 603 or 622. the slave itself.

[@matt30125]

hey Eric thanks for all the great content you make just just had a quick question. how well did this flash connect directly to your hot shoe of your d750? I recently bought a neewer Flash and the IT TL part of The Flash doesn't talk to my camera.

[@Eric_Rossi]

it fits very well into the hot shoe, no issues there!

[@jermaineparker1959]

I like your videos. Great job.

[@Eric_Rossi]

thank you

[@bjarnithomsen]

I have the older YN568EX that had major problems with the battery door. The door broke from the pressure of the battery's... Does this new Yongnuo YN685 also have issues with the battery door ?

[@Eric_Rossi]

nothing I've noticed of heard of yet

[@manoharmgr8235]

வீடியோ மிகவும் பயனுள்ளதாக இருந்தது மிக்க நன்றி 🙏🏻🙏🏻🙏🏻 இரா.மனோகர் சென்னை . Very useful this video sir big thank you 🙏🏻🙏🏻🙏🏻 R.MANOHAR Chennai.

[@luiscolon784]

Hi, I was just looking at the YN968N TTL for Nikon. What's your opinion on this speedlight? Also, I hear that this flash is slave only, is this accurate, thanks?

[@Eric_Rossi]

I have never used that or heard much about it, but I would probably look into this one

[@luiscolon784]

Hi, thank you for your very quick response! Great video by the way.

[@Eric_Rossi]

thank you!

[@douglasoliveira738]

Esse flash possui luz de foco?

[@californiapattycakes4417]

I plan on buying one b/c of your review. Thank you! =0)

[@Eric_Rossi]

awesome, you'll enjoy it!

[@DrUmmair]

best value flash. bought it a month ago. loving it. but i wish the flash head could move all the way to bounce light off a surface from behind. but surprisingly if u compare the power with yn 568ex the flash intensity at 1/1 is slightly lower even with a higher GN. however its a must buy. Great video....👍

[@Eric_Rossi]

Yours doesnt turn 270 degrees?

[@DrUmmair]

Eric Rossi is it supposed to ? no it dosent . i guess i need to send it back maybe there is some problem.

[@billzidis2656]

Hey Eric,i bought the Neewer NW910 for 60 pounds brand new...Is this Yongnuo similar?

[@Eric_Rossi]

I know Neewer products but not much on the quality of their flashes.

[@billzidis2656]

Eric Rossi Thanks for your honesty.One question.I have one iTTL speedlight and one without TTL. I want to shoot a portrait with the non TTL speedlight as a rim light(behind the model) but the main flash in TTL mode.Do you think is possible?Will the non TTL speedlight work? thank you !

[@Eric_Rossi]

Sure, it just of course wont adjust to your settings You just have to set it manually.

[@billzidis2656]

Eric Rossi Thank you!

[@DenisSchiopu]

I want to be able to use 4 flashes and also to wireless remote control the camera. Is it possible ? I got 70D camera. What flashes to buy and what transmitter to get and how would I connect a wireless trigger to take the shot so that those 4 flashes will fire controlled by the camera ? Thanks.

[@SarmadCine]

hi eric . thanks for the video i have d750 . i want to buy flash . may be Yongnuo YN685 . i'm also wedding photographer ,how many shoot can you make with one set battery 2700 mAh ?? and i see the Guide number for Yongnuo YN685 is 60 , and for Nikon SB-700 is 28 . thats means YN685 better then SB-700 ?

[@Eric_Rossi]

All depends but roughly 200-300. Just comes down to flash power being used etc..

[@bme7491]

It seems the 685 is the only Yongnuo that inherently includes a 622TX receiver. I don't think that's true of the 560IV.

[@Eric_Rossi]

yeah the 560 wouldnt work with that

[@raccaba85]

Thnx for the great video

[@Eric_Rossi]

anytime!

[@CanadianArchivist]

I have two because they are good up to 200mm. I also have yn622-tx. Controller. Great!

[@ChannyCapture]

Hi... Little question ... I own the yn622c non TX triggers... Is this a problem of it works fine? Need to know for sure before i buy , that's why ,.. Greetz from Belgium 👌

[@Eric_Rossi]

not sure what you mean the non triggers? they yn622 c or n are transcievers

[@ChannyCapture]

Eric Rossi ow srry for the confusion... Ik Mean i don't have the TX version but the normal yn622c

[@Eric_Rossi]

oh I think I know what you mean. Like you just have the commander that goes on the camera?

[@ChannyCapture]

Eric Rossi yes... The commander on the camera without the TX but the normal yn622c. I use my camera to change settings of my flash ... That's why i don't need the yn622c-tx. So it Will work than ? Greetz

[@Eric_Rossi]

ok great, got it. Yes! The yn 685 has a built in receiver that is Compatible with YN-622C, YN-622C-TX, YN560 IV flash, YN560-TX, RF-605, RF-603 III, and RF-603

[@emanuelschimpfossl5919]

Hello, is this speedlight compatible with a godox trigger?

[@Eric_Rossi]

it is not

[@rmcglon]

I just bought a yn685 for Nikon, and when you turn the flash on, it stays on the Yongnuo "splash screen" if not mounted on the camera. When mounted on the camera it turns on and goes to the normal menu/settings screen just fine. Just wondering if this is by design?

[@Eric_Rossi]

hmm havent heard of that happening, mine turns on and goes to the menu right away

[@LindaMcnally]

Do you have any advice on how to turn off the beep on this flash?

[@Eric_Rossi]

I dont have mine at the moment as a friend as rented it long term but mine didnt beep. I'd check the manual to see if you can turn off sound if thats what you mean.

[@charlesnelson838]

with yn685 just looking some help because I'm not sure where else to turn whenever i take a picture the flash takes awhile like 20-30seconds if not longer before its ready to fire again

[@Eric_Rossi]

what camera are you using and also whats the flash power?

[@willbrandford9607]

does this flash have model light

[@Eric_Rossi]

it does not

[@leahabellanosa]

Can I use pocket wizard to attach with it and with my camera for Transmit and receive?

[@Eric_Rossi]

Yup, it has a pc sync port

[@markchenoweth4748]

I bought one of these and it will underexposed by 2 stops at times. Particularly when zoomed to about 70mm on my 24-70. Any advice. I'm an experienced speedlight guy.

[@Eric_Rossi]

Your zoom is set to match near focal length as well? I didnt find it being that under, it pretty much was spot on.

[@christimetogo6672]

has it is given you any problems in multi mode?

[@Eric_Rossi]

I've had zero problems!

[@s87343jim]

I really want to like YN flashes, but it has a major issue with the Nikon version: It fires a pre-flash even in manual mode (TTL on flash, M mode in 622TX). It means unless you have a really high end lightmeter that can ignore preflash then you can't get an accurate exposure. It also means a bit of power is wasted on pre-flash.

[@Eric_Rossi]

Really? I've used Yongnuo flashes on Nikon camera for the past 3 years. Never had a pre flash issue

[@s87343jim]

Eric Rossi what set up do you use?

[@Eric_Rossi]

I use the YN 560 mark iv or this flash on the Nikon D750, Canon 5D Mark IV and the Fuji X Pro 2

[@1962guitarman]

Can you tell if it is fully compatible with the Canon 6D mark II? No issues known?

[@Eric_Rossi]

as long as you get the Canon version, you are set.

[@1962guitarman]

Thank you!

[@Shebshady763]

It's worth it.. I got a 60d, 6d, and 70d and it does wonders .

[@chukolna]

Hello , i have Nikon d750 and bought 2 YN685 external flashes. I got YN622 Transmitter to use them both at the same time while on stands. I got the opportunity to do some nightclub photography and was wondering how can i use them both at the same time. Obviously at the club i wont be able to use stands and stuff like that, and i can hold one in my hand with the transmitter on the top of the camera, but i want to use both at the same time. My questions is, any way i can put one of the flashes on my camera and that flash to trigger the other flash which would be in my hand. I know some flashes can be triggered by another flash but was wondering if this is possible with my YN685.

[@Eric_Rossi]

why couldnt you use them at the club? A common thing for events and weddings, is to set up flashes on stands in the corners of a room so it helps with the ambient light. But I wouldnt be using two flashes at once if not really needed. I would just use one flash then. But yes, you can have one of the flashes on your camera and the other on a stand somewhere and set that one to slave mode.

[@sarahkellner2891]

can you control the YNN685 flash while the other yn685 is mounted on camera?

[@Eric_Rossi]

sure, you can set it to slave mode and when the flash on camera it will slave and trigger!

[@olectrix]

Can the Yongnuo YN-622N Wireless i-TTL trigger the YN685 in HSS?

[@shadyninja1]

Can this do HSS on Nikon d500

[@Eric_Rossi]

Yes, it doesnt matter the camera model, mainly if the flash itself and the trigger used can do HSS

[@harispap]

@@Eric_Rossi is there any option that can do hss and rear curtain with just the flash on camera and not trigger etc? (for canon), even a manual one

[@herminigildojakosalem8664]

Might be a stupid question but let me hazard it anyway: If I leave my YN685 on TTL and shoot in a low light situation, might it not always be firing in high power and thus overheat? Thank you.

[@Eric_Rossi]

that would also come down to battery life as well, but I havent heard about these overheating much or blowing out bulbs

[@herminigildojakosalem8664]

Mr. Eric Rossi - Thank you for your kind reply. It is reassuring.

[@nathancolbert9627]

how do you turn off the sound??

[@Eric_Rossi]

of?

[@dunkkid23]

thanks a ton!

[@Eric_Rossi]

anytime!

[@topicjpg]

Question, I have YN560 TX Pro, but it only works (far as I know) with RF603 slave mode, and I can't figure out how to use HSS, and if i can use it, any tips? Thanks.

[@jedteng2650]

The rf603 does not trigger the hss on that flash?

[@Eric_Rossi]

sadly not

[@rickkremer0525]

Hi. I know this video Has been out for a while but I have this flash and can’t seem to enable high speed sync. Any suggestions…. Please. I also am using the same transmitas well.

[@Shebshady763]

It's a awesome flash.. the only downfall is it will burn out if you keep repeatly keep shooting without breaks..

[@zamanswe9826]

I have Sony A6300 camera. If I buy this flash Yongnuo YN685, does it fit in shoe and works 100%?

[@Eric_Rossi]

I havent personally tested it, but it should yes.

[@zamanswe9826]

Eric Rossi Is this flash the latest model by YN?

[@Eric_Rossi]

they do have a newer one, I believe, but its not that good from the reviews and such

[@FPVJustin]

How does this compare to Canon 580EX II? Power and build etc?

[@Eric_Rossi]

its a bit more powerful and can do HSS.

[@mikepanick468]

The 685 has weak battery doors. They stop locking after several months. Ebay has new doors for 4 or 5 bucks each. KZbin has videos on how to replace. It took far longer to watch the video and find the little screwdriver than it did to change both doors.

[@papalin4o]

Hello friend. Can you activate this flash with built in flash on my Nikon D750 camera?

[@ethanmiller4348]

Hi! I’m new to the flash photography world and am considering purchasing this flash. Would it be possible for me to use a shutter speed higher than 1/250th for outdoor use while the flash is mounted on my canon 70d? Thank you in advance.

[@Eric_Rossi]

on camera never, you need to have a flash and triggers that offer high speed sync

[@herminigildojakosalem8664]

Sorry, Eric but yes, the YN685 alone on top of the 70D can be fired at HSS. I just did that a minute ago ( I wanted to be sure). Set the HSS in the FLASH CONTROL menu of the 70D, set the SHUTTER @ 1/8000 and fire away!

[@Willowirl]

wheres the follow video on hss?

[@Eric_Rossi]

still to come sometime early for 2018

[@johnrasmussen3752]

I got one ... hope it lasts ... lots of horrible popping sounds. Not every flash but enough to be a concern. It is certainly powerful. For the price I am still not complaining. I'll consider it a bargin if it only lasts a couple of years before the capacitors blow up. I am assuming it is a cheap component fault.

[@Eric_Rossi]

hmm popping, never heard anyone mention that before. Like it pops every time you use it?

[@johnrasmussen3752]

Often enough to make me cringe and note it .. then nothing for a while.

[@johnrasmussen3752]

I'm looking at the Godox/Flashpoint ones now as well as their new XPro trigger, not that there is anything wrong with the YN622C trigger system for the home hobbyist. I just like the bigger slanted screen : ) Well for future when this one dies. I'm a home hobbyist so its not like I use the flash every day, but want a third speedlite ... or that bigger A600 thingie? Why .. who knows, because I can :)

[@bernhardtsen74]

I ordered this setup 3 weeks ago !I have had the YN560iv 6 months ago and its good enough but not great!getting the Godox TT685S this christmas and sees if its just as good or if not better as some say!!!!

[@pgtips4240]

I have read about a fault with the yn685 which makes the flash only fire on full power and that yongnuo support is vvvvvvery slowwwww? Should I be put off by this?

[@Eric_Rossi]

Hmm I havent run into that or heard about the full power thing. I also never had to contact their support and havent heard much. My guess is their support may not be the best since its international, but these flashes are very affordable and easy to replace. It would probably cost just as much to repair as to getting a new one. I shoot weddings professionally and I use these flashes, so I wouldnt be put off. But if you want to be comfortable, just look into the flash from your cameras brand.

[@RealRaynedance]

Maybe a dumb question, but will the AF assist beam work outside of TTL mode? (I've read that some flashes won't let you. I like having manual control.)

[@meenusinghai4799]

Can I use this flash on canon 5d mark 4?

[@Eric_Rossi]

yes

[@hasithawijerathna6847]

Hi i need an opinion from you. what is best godox or yn ? can i use yn685 with godox tt685? please explain it fast

[@Eric_Rossi]

I cant speak a ton about Godox yet, as I havent used them a ton. So I cant compare. Both have pros and cons I'm sure. Not sure what you mean about using both? I would just be in one system, not in both.

[@rifqialfian9959]

excuse me. what yn568ex ii (not yn568) can work with yn622c-tx?

[@Eric_Rossi]

i dont think it does, with the 622, the 560 mark iii/iv, 660 and 685 works with it.

[@rifqialfian9959]

thank you brother

[@alphous3777]

My Yongnuo 685 stopped flashing with Remote Control. Communication is O.K. Test Flash both with Remote Transmitter and On Flash Works. But when I press the shutter, it won't flash. Batteries are new. Can anyone help and know why? Thank you!

[@Eric_Rossi]

which remote?

[@alphous3777]

thank you Eric. I didn't want to erase my issue. Although I've found the reason. I have 'deactivated my built in flash on my Nikon. That ultimately caused not even firing the remote transmitter as well'

[@MrXucurro]

hi im super new on this, so my question is i have a olympus omd em10 mk II, and i want a flash like this one but only can find for nikon or canon .. can still use this one? what features i will loose or which ones can still use? can i put on top of the camera ? it will communicate electronically? Im mostly into use it as wireless flash triggered by my camera flash... there is another budget good option for olympus? thanks , good channel.

[@Eric_Rossi]

Great questions. So most flash brands are specific to cameras. But there are some brands that can work universal, like Godox or Yongnuo. So yeah it'll work!