2013-2018 Nissan Altima Starter Replacement | 2014-2020 Nissan Rouge

Welcome back! In today's episode, I show you how to replace replace a bad starter on your 2013-2018 Nissan Altima. This process will be the same on the Nissan Rouge 4 cylinder model. Thank you for watching. I will see you all in the next video!
business inquiries only contact me at my email [e-mail].
Follow me on Instagram, Facebook, and Twitter to get sneak peaks of upcoming videos!
IG | ericsdiygar...
Facebook | / erics.diygarage
Help support ERICSDIYGARAGE by purchasing the items using the provided direct links. All profits will help support the channel. Thank you!
Items used in today's video
My favorite gloves
Diamond Grip Latex Gloves
www.amazon.com/gp/product/B01...
My Main Camera
Canon M50 Kit
amzn.to/2U7aPCr
Action Camera
GoPro Hero 7 Black
amzn.to/2wS8Bip
My Favorite Mini Tripod
Manfrotto PIXI Mini Tripod, Black
amzn.to/2vZkTpg
Big 4.5 drain pan
amzn.to/32Oz5Sa
Large pan for transmission
amzn.to/3sb5QBS
THIS VIDEO IS FOR ENTERTAINMENT PURPOSES ONLY, DO AT YOUR OWN RISK!
keywords
#nissanstarter #starter #altima #rouge

[@ERICSDIYGARAGE]

Thank you for watching! Remember to give the video a thumbs up and comment down below if you have additional tips for others!

[@fist82]

Doing everything with one hand and holding a camera is impressive.

[@kiisu74]

Thanks, man. My co-worker’s Altima died at work. We THINK it’s the starter, and I’m pleasantly surprised how easy it might be to help her out. My buddy’s CRV needed the intake manifold and a bunch of related stuff removed first. Good work!👍

[@user-wp8cr9tt3l]

Thank you , I was stranded at home and didn’t know what to do. I would’ve never got the starter off or even knew how to get to the back if it wasn’t for your tips thank you God bless you.

[@Samogon2009]

Thank you! Did it myself and saved $300!

[@Jason_T0203]

Thanks a lot this video helped. Also when putting wiring back on make sure to align them correctly with slack to turn starter when putting back on. I had to also lossen the line to give myself more room to turn rachet. All in all worked out fine. Thx again

[@dyno_mite]

Good camera angle and simplifying the instructions in detail made it easy to comprehend. Thank you.

[@ERICSDIYGARAGE]

Glad you liked the video thank you!

[@RGNezz]

Solid video! Thank you 🙏

[@meechgodx]

Thanks, man, my started failed on me I needed to get home, replacement on the way

[@roypulido3977]

This video was helpful. I just replaced a 2018 Nissan Rogue S 4 cylinder starter. The sizes for the two nuts behind the starter were correct. I used a 5/8 for the 2 bolts. In my extraction, the lower bolt was easier to access while the longer one needed a tad more time. It took me roughly 45 minutes from start to finish using socket wrenches and extensions.

[@georgechristensen782]

Your the man with the best info thank you much

[@ERICSDIYGARAGE]

Thank you for watching!

[@rafico9352]

Great work! thanks for sharing your knowledge.

[@ERICSDIYGARAGE]

Thank you for watching

[@johnp.turner2000]

Thanks for your help

[@ERICSDIYGARAGE]

Thank you!

[@carljenkins5092]

This is a great video. Actually the first one I’ve seen on the 4 cylinder.

[@ERICSDIYGARAGE]

Yeah, I haven't seen much for the 4 cylinders. Thanks for watching!

[@balisticonrs46]

Great video. You’re the man! Going to try to swap the starter on my 2011 Altima. All I’ve ever done was change my battery so wish me luck!

[@ERICSDIYGARAGE]

Thank you. Hopefully, you got it fixed !

[@clydeburton6781]

U explain that very well, and a video showing was very good 👍❗,👁️ would give U an A on performance and showing 👍❗😁😀 ♥️💯💪

[@plate001]

Hi. Wanted to know does the 13 Altima have a starter in the same area thanks in Advance

[@Triay314]

How did you get the starter going with the battery being disconnected ?

[@aprilalves5911]

Are the 2015 and 2018 altima starters interchangeable?

[@FG-uu2lo]

# 1

[@michaelsimpson9978]

Hello, my 2015 Altima is doing something similar, I caught a flat and drove home 😞,upon getting home I couldn't turn the car off,and all lights on the dash was on, push button not, responding. Had to remove fuel pump fuse to cut the car off. Put the fuse back in, now car powers up, but doesn't start,no sound when pushing buttons, also headlights stay on. Blower motor comes on as well. 0 sound.

[@frankbenavidezakakid7734]

If you jump start it and it cranks on it's the battery?

[@ashe1928]

I replaced my starter 3 x in around 10 years .....just 2 days ago after work it didn't wanna start again but came on after a while haven't had it happen again should I replace again?? My battery is brand new..2004 g35 coupe

[@ERICSDIYGARAGE]

It will likely not turn on one day, just save up in the meantime

[@jordanboyde5881]

Removed the 2 bolts but it’s still not loose like yours was

[@ERICSDIYGARAGE]

Might be corrosion holding it on try hitting with a hammer

[@vishalmallan]

Is the starter motor working properly now ?

[@ERICSDIYGARAGE]

Yes

[@donquesecrosby7699]

Mines turns over but it takes about 40 to 60 clicks before it turns on is that starter issue as well?

[@ERICSDIYGARAGE]

Could be your battery

[@Angel-cp1sr]

Dam bro I wish live close to me I need a good mechanic like you

[@ERICSDIYGARAGE]

If only I could clone myself 😮‍💨

[@Angel-cp1sr]

@@ERICSDIYGARAGE good stuff bro I actually learn a lot stuff from your g35 repair videos

[@ERICSDIYGARAGE]

Thank you bro! I'll keep them coming

[@Ckoolee11]

Hi, i have a nissan maxima, its locked, battery dead and the key does not open the door, can i charge the battery from the starter engine?

[@ERICSDIYGARAGE]

No you can't. Your key fob should still habe a key that you can take out and open the door

[@antoinereyes7575]

Hi Eric, I was wondering if you can give any tips for a g35 2005 headlight issue? I was wondering if you have any tips or ideas of why only one headlight (low) on the drivers side won't work. I had just replaced both low beams left and right. The left low beam headlight won't turn on at night but the high beams work on both sides. Do you have any tips? I appreciate any help!! Thanks!

[@ERICSDIYGARAGE]

Check your ballast and bulb igniter

[@antoinereyes7575]

Hey Eric thank you! I ended up checking it and the ground wire was loose. Am I able to wrap the ground wire with electrical tape because it keeps getting loose and making the light go out?

[@ERICSDIYGARAGE]

@antoinereyes7575 yes that should be fine. A better way would be to add some Soder

[@henryhebert6533]

where are you located i need a good macanic

[@ERICSDIYGARAGE]

Phoenix Az

[@Blackmambaaa69]

Now do a vídeo of how to remove a broken bolt 🥲

[@buccaneerbob11]

They sell bolt extraction kits