Chevy Silverado Starter Replacement The Easy Way!

Welcome back! In today's episode, I show you how to replace a start on a 2003 Chevy silverado. this process will also apply to the following vehicles.
BUICK RAINIER 2004-2007
CADILLAC ESCALADE 2003-2005
CHEVROLET AVALANCHE 2007-2008
CHEVROLET AVALANCHE 1500 2003-2006
CHEVROLET EXPRESS 1500 2004-2007
CHEVROLET EXPRESS 2500 2004-2007
CHEVROLET EXPRESS 3500 2005-2007
CHEVROLET SILVERADO 1500 2003-2008
CHEVROLET SILVERADO 1500 CLASSIC 2007
CHEVROLET SUBURBAN 1500 2003-2008
CHEVROLET TAHOE 2003-2008
CHEVROLET TRAILBLAZER 2004-2008
GMC ENVOY 2004-2009
GMC SAVANA 1500 2004-2007
GMC SAVANA 2500 2004-2007
GMC SAVANA 3500 2004-2007
GMC SIERRA 1500 2003-2008
GMC SIERRA 1500 CLASSIC 2007
GMC YUKON 2003-2008
GMC YUKON XL 1500 2003-2008
ISUZU ASCENDER 2004-2006
SAAB 9-7X 2005-2008
Thank you for watching. I will see you all In the next video!
business inquiries only contact me at my email [e-mail].
THIS VIDEO IS FOR ENTERTAINMENT PURPOSES ONLY, DO AT YOUR OWN RISK
Keywords #chevystarter #Silverado #Sierra

[@ERICSDIYGARAGE]

Thank you for watching 🫡

[@tokisb5293]

Just switched mine out because of this video! It was a pain to remove since even my hammerdrill couldnt loosen the bolts but managed to wedge a breaker bar in there and get the job done. It was much easier to put the new one in. Probably saved me $400.

[@kingsong2599]

My 2001 v6 was a little different ...Just two 13mm Bolts holding it.Got the job done last night.Was a bit unsure of doing it .Thank you very much sir !!! it works GREAT !!!!!!!!!!!!!!!!!

[@tonylopez9936]

Oh Yeah. Thank you for all the details. The diagnostics are right on. Didn't skip any steps. I will scour your channel for more tips. Your sponsors made a good choice. I will look to support them as well.

[@ERICSDIYGARAGE]

Awesome, thank you!

[@scottmoyer3854]

Ty for posting. This video gave me courage. 4wd trucks are a bit tighter than this. Reattaching the bigger wire took some doin'. 10% sorcery. 90% stubborness

[@dylansellers9339]

I can't seem to fit my starter back in place and my dust cover broke apart. Help me 😂

[@lonewolflou2457]

Great job explaining all the details. I've changed my starter before, and like you I never removed the tire.

[@RJ-ex9on]

Thank you!!!!!!! Your video is the only one that keeps it real and straight to the point and no bull!!!! Other guys on here will tell you to take off the wheel and make so difficult to take the starter out of its place. Thank you!!!!!!!!🎉

[@ERICSDIYGARAGE]

Thank you. I'm glad it helped out

[@ponokareject]

A Big thank you,, This vid helped alot..Plus knowing all the wrench sizes made it so much Faster...TY again.

[@ERICSDIYGARAGE]

Thank you!

[@NM-ik2tl]

As you said, there are many videos but this one explains everything, thank you

[@BBRRaider]

This video helped me replace the starter on my 2003 Chevy Silverado. Thanks!

[@hossymullet]

Great video! I am fixing up my late grandfathers 2003 Silverado so this video was very helpful thank you!

[@ERICSDIYGARAGE]

Glad it helped!

[@jorgevargas313]

This video helped a lot I changed my start on my 01 Silverado single cab I honestly thought it was ganna be a hassle but it took maybe 30 mins tops to take it off and install the new one . I appreciate it 🤘🏽

[@ERICSDIYGARAGE]

Thank you!

[@briancantrell5814]

Helpful video. Thanks for posting. Just changed the starter in my 2002 Suburban and it wasn't too bad.

[@ERICSDIYGARAGE]

Thank you!

[@andysmart-oy5fi]

Fantastic job. I’ll tackle my starter and do it this way. Your video editing is great!!! Explain what is needed, why and cut out the chatter that everyone else does. Keep up the good work.

[@ERICSDIYGARAGE]

Thank you!

[@BazookaIke]

I would suggest 2 things. One is that you clean up the wire terminals so that they are free of any corrosion. Nice clean metal for optimal electrical flow. The other is to definitely not over tighten the nuts on the starter wires. I had someone over tighten them on a new starter for me, and a few months later the starter needed to be replaced. Over tightening apparently caused damage to wires on the inside. Twisting them off or something.

[@onitcompletehomeservices7929]

This is the best video I seen on the starter replacement thank you for all your help. It t made it really easy for me to replace.

[@ERICSDIYGARAGE]

Glad to help out thank you!

[@robertcringely7348]

I liked this video, especially when you said not to be timid pushing the wires to get the old starter free. But your 03 Silverado and my 05 Yukon Denali are very different: the Denali is 4WD. There is a LOT less room to install my new starter.

[@gregc33487]

Yeah. I have a 05 Silverado and it’s 4x4. I recently had to replace the crankshaft position sensor and while doing it you have to remove the starter. The sensor is above the starter. Luckily you just need to unbolt and push it out of the way.. But while in there I realized how tough it would be to actually change the starter. And my truck is almost at 212k miles so it’s only a matter of time

[@ERICSDIYGARAGE]

I have a 2008 escalade with the 6.2 awd and I didn't see much of a difference but that might be different from silverados

[@gregc33487]

@@ERICSDIYGARAGE maybe it a not a 4x4 thing but some of them have 2 transmission cooler lines running very close to the starter. Close enough that you have to push them out of the way to remove the starter/install new one

[@Jason-EasyGrilling]

Yours went in a lot easier than mine. In fact. Mine is still hanging half way in. Had to take a break. 😂

[@drizler]

I just yanked mine loose on my 2000 Sierra and it’s a whole nother kinda ugly. Mine has a big aluminum knuckle about where the camera is and I can’t even force it back enough to tip the nose one out or even see what it’s hitting on. I’ve owned a lot of old GMs over the last many decades and changed starters on all of them but this beast is something else.😓

[@gabrielkarr8755]

Me too man

[@jgonz7158]

Good video thanks

[@michaelanderson894]

Thank you sir..bless

[@ERICSDIYGARAGE]

Thank you!

[@williamworth2746]

You don't have to remove the tire on your make and model because you have four-wheel drive and it probably sits a little bit higher. Your video is very educational

[@BrayanRivera-lo9lx]

Great video going to switch my starter hope it goes well lol

[@jays6.021]

Great Video!

[@ERICSDIYGARAGE]

Glad you enjoyed it

[@josecarbajal6125]

Very helpful!

[@purdyboi8078]

"Today we're gunna change the starter on a 2003 Chebby Silverado" 😆

[@ERICSDIYGARAGE]

😄 at least you still watched

[@user-ny3bs6us1b]

😂😂😂😂😂😂😂😂

[@Butchsiek]

🤣🤣🤣🤣🤣🤣🤣

[@Butchsiek]

Some of my old friends call it a, Chevito...

[@jeremynottmeier1427]

that’s how you know it’s bouta be a good ass video

[@vandenhendemark]

Nice work!

[@hanko5323]

Thank you. This was very helpful. 😀

[@ERICSDIYGARAGE]

You're welcome!

[@PETE1760]

Thanks bro big help!

[@JungleseasonTV]

Very helpful thanks

[@daniel4111420]

Thanks for the video. It helped.

[@ERICSDIYGARAGE]

Glad to hear it!

[@user-nc8pw9xj6h]

Thanks

[@ggstormz7114]

Thanks brother mine was a little different but I did that shit!

[@user-xo4zn4pz1y]

Great video it's helped frfr

[@Butchsiek]

Actually, the first thing to check would be a starter relay and fuse, not replacing the starter.

[@ERICSDIYGARAGE]

Replacing the starter wasn't the first thing I did you probably didn't watch the video

[@Butchsiek]

@ERICSDIYGARAGE please point to where you said and/or did check the relay and/or the fuse. I watched it a second time and still a nothing burger. Something I notice the 2nd time. What does spark and fuel ⛽️ have to do with the engine not turning over?

[@ERICSDIYGARAGE]

Notice how I didn't title this video. what is the first thing to check when your vehicle doesn't start. Regardless, first thing I do as a mechanic is verify the complaint. Vehicle doesn't turn over check✔️ step two do we have a good battery ✔️ step 3 is the starter seleniod clicking that rules out a issue with a relay and fuse ✔️. Step 4 verify the starter is defective, taping it with a hammer, and usually gets the motor working short term. Step 5 replace the starter. Every case might be different so it won't always be a step by step clear cut answer. So why would I check a fuse and relay first if I don't even know If i have a good battery or not

[@Butchsiek]

@ERICSDIYGARAGE You contradicted yourself when saying you're replacing the starter, then mention fuel and spark are good. But go into details it's about replacing the starter. Duh... your step 3 is flawed . If there isn't a clicking sound, it still could be the solenoid is bad. Or the clicking sound you hear is a relay, as some relays make a louder clicking sound. I'm 73, I worked on autos for 60 years. If a person is looking for a starter issue and you post replacing a starter, without the slightest reason as what could be the cause, other than mentioning fuel and spark is OK, but has nothing to do with the engine turning over. Is not a sign of a good mechanic. My sister's neighbor bought a Chevy. I told him everything to look for because some people abuse trucks. He still went and did the opposite and even took it to a shop, to inspect it for issues, prior to spending $5500, for the piece of crap. I looked it for 3 minutes and pointed out to him the following for not buying it, Battery date, Oil looked like crude oil, Transmission fluid was brown, Tires wearing unevenly, Steering cylinder leaking, tie rod ends need replacing, wheel bearings are bad, making grinding sounds, Brakes need replacing, Cracked windshield, Coolant was brownish. I told him I would have offered $1000 or walked away and asked the shop that did the inspection for his money back as they never listed anything I saw. Then the first thing g in his truck went bad, starter. I went through the process to determine the cause. Battery, relay, fuse, I showed him how to check with a meter and by switching 2 relays to verify the relay is good. I then told him like you did in the video, tap on the solenoid.. He did and was happier than a frog that just caught its dinner. Instead of replacing the starter as I used this video for him to see. He xarried a hammer in the truck. Until the start left him sitting in a parking lot. I also told him, he might be able to flip over the copper disc in the solenoid, unless it's not removable like they were once before. Saved a lot of money. He bought a starter on Amazing for $35. I hope it lasts him longer the 2 years.

[@ERICSDIYGARAGE]

@Butchsiek I didn't bother to read your comment thank you for watching

[@chriswhipps6180]

Thank you for the video. I am currently stuck. Unable to get the starter out. I keep hitting something on the back and it will not slip out as it did in your video.

[@ERICSDIYGARAGE]

Rotate it around it will come out

[@chriswhipps6180]

@ERICSDIYGARAGE thank you. I got it out, changed it, and back in. The truck is running great! Thank you for the step by step video and also detailing which tools to use. The 6-inch socket extender was a gamechanger!

[@saulwoah346]

Hell yea brotha 👍🏽👍🏽

[@williamworth2746]

3:18 sir did you use an impact on this socket No I used a breaker bar it said it came with a lifetime warranty 😂

[@Inexactbeetle]

You've got my thanks friend

[@ghostpercs]

question. i have an 05 Chevy Silverado 2500 HD. Alternator has been recently replaced as of less than a month, refurbished Duralast, battery is a yellow cap Optima. recently her start has been sluggish, charged the battery assuming it was that. it was fine for a bit but started the sluggish start again after .. a week, and there’s times where it’s super sluggish, like a full 1 mississippi and a half second type of start. now she’s starting up again with the slug start and i’ve charged this battery twice at this point. she’s not being nice with me pero la tengo chiquiada. 😭

[@doughoist]

Thanks!

[@ERICSDIYGARAGE]

Thank you I appreciate it!

[@leozurc9935]

Great expliation good job

[@ERICSDIYGARAGE]

Thank you!

[@ernanr18]

Hey bro not sure if you’ll see this since it’s an old video but I changed my starter on my Chevy and when I go to turn it on it cranks for like 5-10 secounds and then turns on any tips on why that could be

[@ERICSDIYGARAGE]

Fuel pump

[@chrishernandez2469]

I tried changing mine but one the screws wouldn’t go in, any help?

[@kennymcquinkiss8292]

Great video thank you for sharing. Liked and subscribed

[@ERICSDIYGARAGE]

Thank you!

[@peterbaez6811]

Great vid! What are the dimensions of the bolt holding up the plastic shield? Mine is missing the shield and bolt.

[@ERICSDIYGARAGE]

I'm not sure of the dimensions, but it's a 10mm take another bolt off the truck that's a 10mm. It should be the same style

[@edc120912]

Is process the same on 6.0 3500?

[@telesasmith4573]

Prefect

[@ArtStanton]

Does this work the same way in a diesel?

[@user-ui4lt2db9p]

Do you have any videos on replacing or reinstalling a year 2000 g20, bumper?

[@ERICSDIYGARAGE]

I only have one showing me installing a text front bumper

[@Real100thMonkeySyndrome]

Great video, Stuck at the gas station. Asked someone for a jump.. I let it charge for five minutes and she started up, would that still, be the starter? Im parked now and I go to start it and it makes a click sound…

[@cameronkent4778]

Sounds like that's a battery issue if it started with a jump

[@thatsallfolks3115]

What does it mean when you turn the key and it clicks non stop until you let go of the key, battery is good and full of gas?

[@ERICSDIYGARAGE]

Weak battery is usually the case

[@thatsallfolks3115]

@@ERICSDIYGARAGE I replaced tbe battery and it seems to be working , but what kind of confuses me is when I tried jump starting it wouldn’t even attempt to try and turn over. 🤷

[@ERICSDIYGARAGE]

@thatsallfolks3115 okay try and check the starter it could be that the connection to the back is loose

[@Palmyj07]

0:51 0:51 that’s what my truck was doing the other day it’s in the shop now and they want $2500 for a starter

[@exscalabastard4437]

Been smacking my starter for a month because if I take it out the flywheel will fall out, (the truck was never taken care of and nothing was ever changed in it)

[@melodyprice2731]

Mine just continuously clicks. Is it still the starter

[@Toneees_]

Yeah

[@mickcarroll1274]

Have your battery checked.

[@shadowfire9319]

Mine just clicks does that mean it could be a bad wire?

[@ERICSDIYGARAGE]

Clicking could be the seleniod, so the motor could be bad in the starter

[@shadowfire9319]

@@ERICSDIYGARAGE would that be affected at all if i have a kill switch?

[@ERICSDIYGARAGE]

@@shadowfire9319 no

[@shadowfire9319]

Thanks for the help 👍🏼

[@Fishy100thousand]

Chebby

[@damondamon3062]

No sound

[@hunters995]

Looks like you had a bad solenoid. Probably did not need to replace the whole starter, especially after you tapped it and it started.

[@ERICSDIYGARAGE]

It is better to replace it all together to avoid any future issues, and since it was a customers vehicle, more reason to fix it properly

[@Toneees_]

If one part of the starter is bad why not replace the whole starter? Will save a hassle in the future buddy

[@davidhuser8177]

You did a terrible job of showing where the starter was. You just started going under the truck with the camera and then just switched to a frame where you already found it

[@ERICSDIYGARAGE]

Haha it's super easy to find, If you couldn't find it yourself, you probably shouldn't attempt to replace the starter to begin with

[@dewanyesasser2133]

He did better than the other video s he explained it better the other video s they just talk

[@nathanwhitrow]

it’s not hard to find a starter

[@colbywhite9318]

If you can’t find the starter on these trucks then you just need to bring yours to a shop

[@ivanbustamante6011]

Wtf you talking about man this is a great video better than most I have seen but there's always a sissy that likes to cry

[@Shedhunter2]

Thanks!