You saved me!! My 2003 Tahoe was broken into on the side of the road when it ran out of gas and got left here in Hawaii on the Big Island. I struggled with it for sure, days and hours, but with your precise instructions I was able to get it all replaced and now programming it to relearn the key. Thank you!
@cpllabonterules Жыл бұрын
The best how to video I have ever seen! I followed step by step and got my 2006 K2500 Suburban back on the road!
@kylercainfitness2 ай бұрын
Bro , thanks for being quick with it. These other videos are 3x longer and much harder to understand/follow
@sterlingwitherspoon5709 Жыл бұрын
Keep in mind all this is for the lock cylinder housing. Not just the lock cylinder.
@adrianbenkomo Жыл бұрын
What’s the difference? Just had someone tried to steal mine the same way what do I need ?
@hectorsmobiledetailing90011 ай бұрын
Same situation currently, what did you end up needing?
@adamkenny78485 ай бұрын
Can the lock cylinder housing go bad
@SharpTepes Жыл бұрын
some jack asses did the same to my truck about 5 weeks ago, thanks for posting it up. now i can get to work on it haha have a great one
@leafairicsun3654 Жыл бұрын
same thing on my 1500
@williamwatson8796Ай бұрын
Same Thing ( Destroyed ) on My 2000 Yukon XL...in Los Angeles...They Did Not Get My SUV.!! ( From 10 /2023 ) Burglary... Bill in L.A. Helpful Video. ✓✓✓✓
@chrisfabela79514 күн бұрын
Very straight forward good video man !!
@rickybobby7692 Жыл бұрын
They’ve tried to steal my 2500 Silverado about 6 times in the last 2 years. I’m going to try to fix it myself this time, hopefully add a kill switch as well but that might be a little above my head. Thanks for the tutorial, hard to find the exact step by step vid for this exactly
@stormmodrak Жыл бұрын
Great video bro. Sad that it has over 4000 views in 1 month. People love jacking these silverados apparantly
@saaantacruz Жыл бұрын
Mines just got broke into and this video helps alot
@KnowYourRoleBlvd7 ай бұрын
Mine got broken into in broad day light at the mall in Houston, thief’s are just awful people
@320_allstar19 күн бұрын
Mine got stolen yesterday and just got found like 20 minutes ago. Just ignition damage from what I’ve heard. So I’m doing my research now
@tobylillie65403 ай бұрын
Helpful tip: on the white plug on the top of it that he says twist and pull out, there is a little tab on the top you need to push in with a screwdriver so you can twist it 02 silverado
@williamwatson8796Ай бұрын
Awesome / A Mich Needed Video.....Thank You , Bill in Los Angeles..... Thieves Tried to Steal My 2000 Yukon XL ...But they Did Not Get it ..!! But the Ignition Housing and Key Cylinder Area was Badly Destroyed...just Like the One in Your Video. I've Been too Lazy, and Depressed about the Whole Situation...to Tackle This...Although.... I have the New Housing Switch Box & the New Cylinder ,With Two New Keys... I've Been Hesitant to Tackle It...!! The Security ( Passlock ) prevents the SUV from Starting Right Up...Mine will Need " Re- Learned " ALSO..THANK YOU FOR MAKING THE VIDEO...!! 4/12/24.
@carlosportela2017 Жыл бұрын
Excellent video, help me a lot, thanks buddy 👍👌
@migmogg8087 Жыл бұрын
Thanks for the super helpful video
@orionthr123 Жыл бұрын
Many Thanks!!!!! Worked 👍 Great.
@stormmodrak Жыл бұрын
Towards the end when you said "take off this white clip, make sure its in the off position"... what is that cable for? I may have f*cked that cable up ... thanks for the help
@rubenm.3915 ай бұрын
Thank you for this video sir!!
@ccbest219 күн бұрын
How do you know if you need the housing? Or can I just replace the ignition switch?
@MrXxblueeyez13xx4 ай бұрын
What is the little white clip you have to twist and pull out? The one you talked about right before you went to putting it back together. I broke mine today and I'm trying to find out what it goes to so I can replace it if possible. Please and thank you!
@ninjijesusgaming67974 ай бұрын
I just need to know where you got that housing that came with the chevy key. My truck just got broken into and the same thing happened but i already had replacment keys it seems. Where would i get the housing and key that you got
@Jellydoughnut4593 күн бұрын
So my key starts my truck and runs and the security light is still on, is it the housing?
@salmendoza9938 Жыл бұрын
The one clip on the back bottom of the ignition housing won’t slide out on mine .. Any idea?
@imonaroll95022 ай бұрын
Play around with the ignition position inside the housing
@donovanlichte56122 ай бұрын
Is the cable with the white clip important? Mine is broke not sure if that’s why my truck won’t run
@fakeaccount4092 Жыл бұрын
Thank you man!!!
@4me808 Жыл бұрын
how do you get the yellow ignition part out ?
@TheMarcusGomez Жыл бұрын
Nice vid thanks. Theifs mess up my ignition lock housing when they tried to steal my truck.
@isaacmckendree22718 ай бұрын
Do I have to program my key even if I don’t have a key fob
@thehemii4266 ай бұрын
great vid ty going to try replace mine
@gilbertgutierrez1306 Жыл бұрын
Nice video 👍🏻
@MrFelipecalderon97 Жыл бұрын
ok, my question is, when should the housing be changed, I'm having a problem with an 07 Chevy 2500hd sometimes it starts and sometimes it doesn't, and the ac stopped working and he told me in an auto parts store that it was my cylinder and that maybe he could fix it I must change everything and housing what is the reason why everything must be changed
@eduardozuniga87319 ай бұрын
Bro did they mess up you’re steering column shift mechanism?
@BazookaIke8 ай бұрын
what is a kill switch and what does it do to a vehicle when it is activated? I recently had a problem with my 2003 Silverado. The key stopped turning the ignition. All methods to extract the cylinder failed, so i drilled it out without damaging the cylinder housing. Now, i have a new ignition installed, but it is locked in place like the old one was. Only difference now is that the shifter on the column goes up and down through all the gears. It is no longer locked in park. Why is this happening??
@KnowYourRoleBlvd7 ай бұрын
The kill switch cancels the delivery of fuel to the motor so whenever someone who tries to steal it or start it they won’t be able to get fuel and it wouldn’t start
@FernandoSantos-el4lm4 ай бұрын
Can u do this on a 2000 Chevy Silverado?
@Steve-pi1eg Жыл бұрын
Something frustrating happened today. I was at Auto Zone and got the exact kit you used. I told the attendant that I needed the metal U plate that is shaped more inwardly to hit the metal only. I explained that the U bolt in the kit would break the plastic. He swore it wouldn’t. It did. Now I am trying to figure out what to do. I don’t know if they even sell the plastic that is on the outside of the metal as shown in your video.
@jasonb11598 ай бұрын
Someone already bent the kit that he has
@guyerikk6 ай бұрын
Junk yard piece
@MarcoS-fb3qr5 ай бұрын
Go to the junkyard
@txfishin733 ай бұрын
You should’ve bent it pore guy!!
@jayglez4512 ай бұрын
I had my 2000 Silverado stolen and the damage was a bit more than yours but I can’t get it it start, haven’t replaced the ignition housing yet. Did you have a problem starting your before you replaced the ignition housing?
@Carlitoswayyz2 ай бұрын
In my situation it started even after the damage, but not sure if all silverados have pass lock sensors which if damage will prevent from starting and it’s located on the housing itself.
@sanderg1115 ай бұрын
Thanks for the help, I never would have gotten it apart without your video. I have a question though, I broke the switch, the last one you showed, that had to be twisted and pulled out, and I don't know what it is so I don't know how to replace it - or if I even have to. It looks like it activates when the key is in the start position. Can you tell me what it is called, what it does?
@Carlitoswayyz5 ай бұрын
Glad the video was useful! I believe that connector you’re talking about is just for the chime when your key is in the ignition. If it’s chiming when you open the door you can take the spring out inside the plastic connector, I don’t run it on mine as I don’t like the chime sound.
@jasonb11598 ай бұрын
Gotta go get me one of those master steering wheel things
@jonb69373 ай бұрын
HELP I changed out the lock cylinder after they tried to take the truck, the issue I’m having is, the key won’t turn at all, I pulled the interlock cable that connects from the ignition to the shifter, and the key turns fine, and turns the truck on, but will only go into park and reverse. I put it back in, and the key won’t move turn at all, I tried the 10 min. Thing in the video with the cable out, and no luck.
@Fiveten_dxn1elАй бұрын
Did you fix it and how I’m having the same problems
@jonb6937Ай бұрын
@@Fiveten_dxn1el there is a pin, that goes in and out, when you shift. In my case, it was bent, from someone trying to steal it. It’s on top of the column. You have to take the plastic around the column, so you can see it, wiggle the shifter, and you’ll see a silver pin, about 2.5 in long and .25 in width. It has a cable running to the shifter, I believe? You can’t miss it. I discounted the cable, and took out the pin piece. just be careful, and patient. once the cable and pin is out, I just straighten it back out, reinstall, and good to go! I hope this helps!
@raymundoislas2303 Жыл бұрын
I did everything step by step but the truck won't start it sounds like it wants to but just won't btw thanks alot for the video
@oscarnavarro8632 Жыл бұрын
Where you stay at Carlitos I need your help My Tahoe got stolen and I replace ignition switch it works turns on and everything 😢but my battery was draining I notice my ignition switch was not going back it’s position acc Hopefully you can help me
@Carlitoswayyz Жыл бұрын
hey whats up oscar hopefully you got this issue fixed but in case you didnt take the black connector off located on the bottom of the cyl lock housing it will have a white gear, adjust that gear until you have it in the correct position that gear controls the position of the switch hopefully this fixes your issue.
@autumndickey59773 ай бұрын
Can I do this with a 02? Someone tried to steal mine a few nights ago and screwed up my ignition so I need to replace it
@Carlitoswayyz3 ай бұрын
Sorry to hear that, yes it can be done with a 02.
@philippascuzzo-hi3kh Жыл бұрын
Can anybody tell me what the clip behind the pass lock sensor is the one that you have to twist and then pull up on?
@tallc23 Жыл бұрын
It works as a key chime when your key is left in the ignition. When the key is in and you open the drivers door it will chime.
@FernandoSantos-el4lm4 ай бұрын
How long did it take someone first time doing this for I can have a realistic time I should be getting it done because I’m sure i won’t do it as fast as the video 😂
@edbeck8925 Жыл бұрын
👍👍👍👍
@dcpjoker256 Жыл бұрын
mine doesnt have a kill switch but barelly starts
@kenberhenke3778 Жыл бұрын
Same issue but you cut one part out I needed... I got the housing off... Now I cant figure out how to turn it lock to get it out of the housing to install new ignition
@Carlitoswayyz Жыл бұрын
to remove the yellow plastic that comes on the cyl lock housing there is a small hole located on top of the housing get a small pick to release it once released the new ignitions just slides in hope this helps
@jakem2012 Жыл бұрын
Ya but how did you get the drilled out housing off without being able to turn the key?
@Anthony-fs9kh Жыл бұрын
Just happened to my 06 silverado thiefs tried to hotwire it and messed up my key area!
@KnowYourRoleBlvd7 ай бұрын
Same
@migmogg8087 Жыл бұрын
Also I bought the same exact kit but had to bend that big U looking flat piece to get it to press onto my gmt-800
@tallc23 Жыл бұрын
How did you bend it? I was thinking of doing the same thing. I purchased the harbor freight puller. Almost think this fork is too wide?
@migmogg8087 Жыл бұрын
@@tallc23 I put it on the floor and stepped on the open part
@gjolinares2311 ай бұрын
Can you use your original key with a new cylinder? If so how can you set?
@blackymanedez7 ай бұрын
What’s the need of removing the steering wheel
@dbar3221 Жыл бұрын
The important part was omitted!!!
@emmettgreen56017 ай бұрын
You have just omitted it too
@blackymanedez7 ай бұрын
If you moving a airbag you should unplug battery 🔋
@nelsonbrum849615 күн бұрын
That was step one, watch the video again.
@randomasitgets801 Жыл бұрын
I don't understand why they didn't just hot wire it haha. Much faster
@KnowYourRoleBlvd7 ай бұрын
It had a kill switch, so basically it wouldn’t get fuel to the engine regardless
@txfishin733 ай бұрын
Because if the key won’t turn then you don’t have power to the ECU which communicates with the ECM and the fuel pump it will turn over and act like it wants to run but it dies to lack of communication
@txfishin733 ай бұрын
I’m pretty sure fuel injection systems have to have communication to tell them when to fire properly I had a Duramax diesel that’s how mine works I tried to jump it off but with the key in the opposition it would not stay running