Error code E04 & E08 Water valve not filling or filling the Drum overnight Beko made washing machine

[@paulcohen1555]

Excellent explanation (AGAIN!).

[@How-to-repair]

Thanks again! I would love you to leave your opinion on our poll about manufactures building in obsolescence to appliances. kzbin.infoUgkxygHomnUySd_bYjaJBdEHPO6T4dYo9Ahm and this is for you kzbin.infoe432SAb2g08 please remember to subscribe as that's is what keeps this channel going. Thanks 👍

[@nullmoon89]

Extremely helpful and thorough. Thank you!

[@kieranhoward2760]

Another top notch video Fair play

[@How-to-repair]

Thanks a lot for your kind message mate. Please remember to subscribe to our channel, as that really helps us 😇 Since we work very hard in our warehouse making free video guides for you all on appliances, we always appreciate a beer, offering a choice of single or round beer. www.how-to-repair.com/help/buy-paul-a-beer/ Thanks, Paul 👍

[@williamhurst6072]

Has an e8 fault however when I run the diagnostic it removes the fault. Water inlet part are not the problem as water goes in but it drains straight away. Never seems to heat even on diagnostic mode. The water fills for each of the tests(8,9&10) but when you get to the cycle test(11) it's spins and the water is slowly removed with no signs of heating. Tryed running a cold cycle but that didn't work either. Is the lack of heating relevant since its a e8 issue eg water or is it just a by product to save the machine from heating nothing?

[@sunhouserecords]

Great...Sorted...Brett

[@How-to-repair]

glad you got your washing machine sorted @sunhouserecords please remember to subscribe to our channel as that really helps us kzbin.infoe432SAb2g08 Thanks, Paul 👍

[@addz]

mine is a wdk742421w washer dryer. I heve E08 error. Spin works, drain works, Dryer works. The washing functions do not work. It starts to take water, then stops and does nothing until after 2 minutes when it terminates cycle and unlocks door showing a no water symbol. The error message shown is E08 if I hold down spin and turn on. Machine and filter is clean. Any Ideas?

[@NiallLeechphoto]

I have this exact machine. It works only on rinse cycle. Stopped working after doing some plumbing work on house. Water had been off and hasn't worked since. Water supply is fine. Any help appreciated !

[@How-to-repair]

Do you want to check if it's a hot and Cold supply. If this is the case, then you may have a problem with the hot pipe. You may have one of the water valves gonna open circuit @NiallLeechphoto please remember to subscribe to our channel as that really helps us kzbin.infoe432SAb2g08 Thanks, Paul 👍

[@lalithsaminda4830]

Thanks lots

[@Oneclick2change]

Hi m8 My beko DRCS68W condenser dryer not heating i changed the heating element and the front thermostat that with yellow cable but still not heating can you help me please. Thank you very much

[@How-to-repair]

ومظات علي طريق النجاح I would check to see if there is another thermostat or it could be the relay on the circuit board. this is for you kzbin.infoe432SAb2g08 please remember to subscribe as that's what keeps this channel going. Thanks 👍

[@wale_disu]

Help my washing machine door won't open. 😢

[@fernandomatias5514]

♥️🇵🇹

[@How-to-repair]

Glad you enjoyed the video from Portugal. Hope you have a great Christmas. Thank you for subscribing to the channel