I was on a forum and some guy was asking about ESC brakes and stuff, I simply gave him a link to this, and now he understands it perfectly so thanks for your knowledge. I really appreciate it :)
@fpvvertigo89588 жыл бұрын
Great video, thank you! I first started using the brake on ESCs for folding props, as this is the only way to get them folded while flying.
@MSmith-jf5wo6 жыл бұрын
Great video! I would have given up on R/C Planes if it wasn't for these tutorials! I am SO Grateful for all the videos by Experimental Airlines
@jmac4304 жыл бұрын
I know I'm a little late to the game here, but braking is accomplished as a result of the ESC shorting the leads of the motor together, and when they are shorted out, maximum resistance is then applied to the windings and the magnets have a lot of trouble passing those coils (think extreme cogging) therefore locking the rotor up, to a certain degree, and causing a breaking effect... pretty simple actually. You can try it yourself on any permanent magnet motor by shorting the leads together and trying to turn the rotor by hand while doing so... you'll notice a huge difference and increase in cogging/ resistance
@rockrl98 Жыл бұрын
Are there any escs that can do regenerative, or do they all just plug up.
@guygavinable Жыл бұрын
Very informative and well presented. Many thanks.
@MichaelKGizzonimo8 жыл бұрын
If I use this info or not. This was a bunch of stuff I had not thought about and should. Thanks for another great video!
@tropdiver1005 жыл бұрын
Just a couple comments; PWG was correct below when he said braking is achieved by the ESC bringing at least 2 of the motor leads together thus causing the motor to become a generator, thus being hard to turn because it's trying to produce power. Second thought is about a free wheeling prop; it has LESS drag than a stopped prop, just read the comments on any sail boat forum and you'll come across this same discussion. In fact math would indicate a stopped prop has about 3 times MORE drag than a free wheeler in a boating application. This doesn't affect the main point of this vid though, and I enjoyed it, thanks for sharing about braking.
@grim-upnorth8 жыл бұрын
Thanks for this video. I have been championing the use of the ESC brake at the flying field for years, but one of my pals just refuses to program his ESCs despite all the benefits you mention in this video. I've just sent him a link to this video, hopefully he'll listen to you :-)
@earlallen66285 жыл бұрын
Thank's, had know idea how to go about enabling the break system. Looked for other sight to get more info yours is the best.
@q300SBB8 жыл бұрын
Hi Ed, Just had a 2200 3S lipo battery erupt in flames while charging. I knew one cell was low, but no error came up when I started the charge cycle. Not a particularly old battery, not puffed or visibly damaged. Praise the Lord, that the I didn't leave it unattended, my cement sheet bunker held, smoke detector and Supercheap auto fire extinguisher..
@grahamrdyer63228 жыл бұрын
I'd never thought about Breaking before, Thanks.
@woodstoney8 жыл бұрын
Thanks for all that really helpful advice. Those cards are worth their weight! Great vid!
@SnapPunchRobert8 жыл бұрын
I love the programming cards. I fail miserably when trying to do it with the raido, ACK! Great video Sir.
@Bulgie8 жыл бұрын
Greetings from AZ. I learned about this from you years ago, and truly has helped me tremendously. Thank you.
@Super73VW8 жыл бұрын
The braking force of the ESC most likely uses is 2 lead dynamic braking. So one phase is left open (No AC voltage applied) while the other 2 phases has an AC voltage applied as an effective single phase. The torque applied to one lead in one direction is canceled out by the opposite direction of torque applied on the 2nd lead. The braking force is determined by the voltage applied to the leads...that is why some ESC's seem to have harder braking force.
@morgantyree4 жыл бұрын
Your video should be linked to any web page that reviews models that have this potential (i.e., Zohd Dart XL Extreme). I found this indirectly from one of Justin Davis' (Drone Camp RC) comments about the brake on the ESC. I didn't know what he was talking about, but it was enough to make me investigate this further. Thanks.
@toddy25196 жыл бұрын
I'm glad you made this video! I have a twin-engine plane by World Models ( looks like a Piper ) from NitroPlanes. One motor has the brake off, the other brake is on and I have never flown it because I didn't know my Dynam ESC cards might work ( it's the same programming card you showed ) with it. I'm certainly going to try it and see...wish me luck! Thanks again!!!
@yellowbusguy8 жыл бұрын
Setting start to soft is handy when using folding props. It avoids slamming the prop open violently when you throttle up. It's easier on equipment.
@ExperimentalAirlines8 жыл бұрын
Oh that is an interesting observation. I have not folding props but I can definitely see what you mean.
@wideyxyz22715 жыл бұрын
As a newcomer to Rc Flying this is very very useful thank you...
@theElderberryFarmer8 жыл бұрын
Great informative video, Ed - thanks for taking the time and effort to put this together to share with us!
@DoRC7 жыл бұрын
Interestingly a pretty in depth study determined that, depending on the length vs pitch of the prop, the drag could be more or less when stationary then windmilling. Apparantly its pretty complicated to figure out which one is better and there is no one answer.
@jimbo26293 жыл бұрын
“A stationary propellor has less drag than a freewheeling one”. The reverse is true and it’s why rubber powered free flight model aircraft for decades have had a free wheeling mechanism when the rubber has unwound to prolong flight duration significantly.
2 жыл бұрын
i dont get it
@parkflyerindonesia8 жыл бұрын
Fantastic video and well explained Ed 😊👍 Now I feel safer with the brake on mode. Thanks!
@dwg88098 жыл бұрын
I think the ESCs just short out the motor wires,the difference in breaking speed would depend on the resistance applied between the wires.
@RobertSzasz8 жыл бұрын
most esc braking is based on just electrically connecting all the leads together. More sophisticated systems can adjust the resistance between the leads, lower resistance creating more braking force.
@ExperimentalAirlines8 жыл бұрын
OK that is interesting. So by that idea it just applies a constant current to all three phases during braking? The Turnigy Trust seems to be crazy fast in arresting the prop so perhaps that is one of the "active" types. I can't help but think that with a little firmware tweak we could easily have reverse thrust under certain circumstances, like ground-based RC, with reverse gear.
@dwg88098 жыл бұрын
ExperimentalAirlines The back emf from the motor is strong enough to stop the propeller really fast.Don't know about the particular ESC but by seeing if there is any current draw from the battery during breaking might be a way to test if it reverses the motor polarity. You can get reverse on some ESCs by flashing it to simonk i think,some multirotor people do it so that they can fly upside down,they even have special props for that.
@MatHolliday8 жыл бұрын
Prop breaking uses eddy currents to apply resistance to the motor which can be explained by Lenz's law, which is essentially Newtons's third law but for electromagnetics.
@gordonhirsch82468 жыл бұрын
it sure does..........like brakes on electric cars..........and stationary bikes.........
@TheRattleSnake31458 жыл бұрын
the "music" setting is a cell count setting. It assigns different music to each cell setting. Most escs have the cell count setting on auto as default.
@travisweide90718 жыл бұрын
Though I am not sure with the logic that you presented with reduced drag and minimal chance of breaking the prop on belly landing I do see the potential for more hang time when flying inverted with a mini rotor
@Tmask328 жыл бұрын
Ed, I hope this comment finds you, I just wanted to say it was great meeting at flite fest this year, I had the red noob tube with the balsa tail stab, u have been very helpful in my building techniques. Thanks, also Nafpv2016 is right around the corner, check it out, and maybe I'll see you there.
@alexherrera39183 жыл бұрын
👍👍👍Very useful !!!!! But i have inquiry in the RC forums and they are saying that this is only possible with a retractil propeller. Nobody have hear of a ESC feature that recognice the propeller position and set the ESC accordingly to stop the motor at a specific position. I hope you can elaborate more on how the motor knows the position of the prop just by haaving the break mode on. Thanks
@LegacyMusicStudio8 жыл бұрын
You got my Transmitter! Isn't that thing awesome!? I got a Taranis off to the side that, one day, I will try to use. But its so hard to think about trying that when I have my I-10. LOVE IT. Great video as always!
@DreamFlyEcuador8 жыл бұрын
That is very interesting as in the manual of my Flyzone Cessna Corvalis they describe how to program the brake, and suggest to leave it deactivated.
@JustaPoke8 жыл бұрын
Setting brake is good for some type of airplanes, mostly belly landers. Planes that have landing gear like the Corvalis are better off with the brake deactivated.
@ExperimentalAirlines8 жыл бұрын
Yes agreed. A plane with landing gear often benefits from landing with some power on.
@gillesbkf43154 жыл бұрын
1:10 that's absolutely false mate ! With esc braking, the motor is exerting some force to keep the propeller stopped, it is indeed slowing the aircraft more than if the prop was turning freely. It turns because wind is blown onto the prop (relative air speed). It's by no means comparable to a windmill. A windmill takes the force of the wind, which spins the blades and you use the rotational kinetic energy to produce work. In a windmill you put resistance on the shaft, which is the amount of work you get. With esc brake off, 0% throttle, the esc gives 0V to the motor, and it doesn't gives nor take any work to the prop. You can also see it from a more physical/fundamental perspective : The blades, as they turn freely due to the wind, their cross section relative to the airflow is the thickness of the blades (they slice the air like usually). But if you prevent them from turning, the cross section relative to the airflow of the very same blade is closer to its wideness (I'm not talking about the diameter here). Basically, it's the area of the propeller's shadow if the light comes along its axis of rotation. More surface against the airflow = more drag. Therefore what you stated here is a misconception. I will try to see if any difference is noticeable inflight, but esc braking is of course useful on belly landings !
@jimbo26293 жыл бұрын
I’ve posted that you are correct, as every free flight modeller using rubber power knows, because they prolong flight times by using a folding or free wheeling prop mechanism. Free wheeling props were invented decades ago and are standard on many ff models. They make a significant difference easily observable.
@BrianPhillipsRC7 жыл бұрын
Nice video! Good info!
@matijanovak39063 жыл бұрын
if you can get the prop to stop in horizontal position, great. mine keeps spinning slowly, like 1/4 turn per second and in the last few days since i have set the esc brake i have broken more props than in my life probably. if it does catch the ground with the brake on it has way more resistance to overcome compared to a brake off. choose wisely
@lw2163165 жыл бұрын
Help, please.....I shopped and the name Hobbywing keeps showing up - but there seem to be some for cars some for planes and the ones for planes see to be for certain model planes only- is there a generic card that will work for all or most esc ?
@ExperimentalAirlines5 жыл бұрын
There seems to be some variability in the way the programming protocol works, so I do not know of a universal programmer. But the Hobbywing ones seem to be pretty representative of the other brands that work with most of the sub-40a, shrink-wrapped ESCs that we use by the millions. I'd say you're 85% good with a Hobbywing programmer or (you know how China works) one that looks just like it.
@lw2163165 жыл бұрын
@@ExperimentalAirlines So does it matter if it says CAR or AIRPLANE ? Most of them seem to be advertised as for CAR. Is an ESC an ESC and it does not matter if it is used in a car or plane ?
@cardinaldriver5 жыл бұрын
A windmilling prop presents a lot more aerodynamic "flat plate" area than a braked prop producing induced drag. Great for a speed brake!!!
@rxtxfx68408 жыл бұрын
Great video, as always kept simple and easy to understand (also for foreign speaker like me). Thanks for the good education. Graupner ESCs are also quite good programable, with help of the Hott telemetry with a GUI directly in the transmitter, and the adjustment possibilities are huge. Also I wanted to ask you if you could do a video about motor timings. You have spoken in this video pretty much about it and made me curious.
@karlschwab64378 жыл бұрын
Great video, very informative on this subject and using the programming card! Thanks for doing it.
@aerofpv21098 жыл бұрын
Your detailed explanation was spot on and very good to know. Well appreciated sir.
@dontall718 жыл бұрын
Thank you sir, as always your videos are full of information.
@mountaindewdude768 жыл бұрын
Cool video, Ed! I've grown to have an enabled brake on some planes and a disabled brake on others and I like the results. I've not seen a programming card like your Trust card but that looks easy enough. I really like the Turnigy Plush line of esc's and I have the button programming card for them. It's just so simple to make adjustments as needed at home or the field. Take care buddy!!!
@think2cre81 Жыл бұрын
Great video sir 👍
@think2cre81 Жыл бұрын
I can't find that exact program card you're using. Can you suggest a good one that's available today ? Thank you
@sailorjohn22248 жыл бұрын
Years ago a old timer advised me to increase the size of my prop, why? Because the wind milling of the prop would slow the plane when landing. Now I always install landing gear on my planes, even my NoobTube because I enjoy landing as the best part of my flight. Landing gear nearly eliminates broken props providing it's a smooth landing.
@thekaratekid024 жыл бұрын
Hi there, great video. Do you know if it's possible to implement "drag breaking" on a typical ESC this way? I'm using a similar type of ESC to control a vehicle on wheels and am trying to achieve a steady break instead of a hard stop. Any help would be very much appreciated thanks.
@sidhvin128 жыл бұрын
Great video! How's the TGY i10? I intend to buy it this summer. The price for the package looks too good to be true. But is is really that good?
@Chris-vc1dh Жыл бұрын
is it possible to set that the break will always stop the prop horizontally?
@rockrl98 Жыл бұрын
Any idea, is that regenerative brake or does it just plug up the motor?
@DutchRC8 жыл бұрын
Excellent video & topic sir! To be honnest I have to say not All ESC's come with the beep-beep-beep instructions :$ That card-thing really is the easiest bet
@JamesManimal3 жыл бұрын
What does the Auto Rotatation restart timer mean? I've got the turnigy plush 32 programming card.
@JacobTJ13 жыл бұрын
excellent explanation thank you good Sir
@brianemery89458 жыл бұрын
can u do a quick video on motor esc timing?
@jongonegone12623 жыл бұрын
i have a question for you ? with brushless outrunner rc aircraft motors is it possible to adjust the timing with just the motor mechanically without rebuilding or disassembly of the motor ? thanks for help.
@shravanrajagopalan43876 жыл бұрын
Wonderful information, thanks for the info
@FongZiBarclay6 жыл бұрын
Thank you. I learn a lot today.
@mt-xx1tt7 жыл бұрын
Its perfect for crawling and sticking to gradiant
@douglassnyder12928 жыл бұрын
Thank you for yet another informative and well articulated video. The problem I have is knowing what brand programing card works with what ESC? Example: My Turnigy card works on Hobby King ESC's but not Hi Tec Energy Sport ESC's, or Twisted Hobby ESC's. Very difficult to find out which cards work with what ESC's. You might need to buy several, or use only 1 brand of ESC to simplify. Bottom line: Using the brake is a good thing for multiple reasons, and yes, using the transmitter to set ESC is a pain in the %$&.
@angelreading50987 жыл бұрын
Why dont they supply programming cards with the ESC's ? from past experience many do not work on specific units,it would take the hit and miss out of programming.
@scable-eq7bp3 жыл бұрын
Is there a way to program the brake using your transmitter?
@joce09934 жыл бұрын
Thx for the good video. Air dynamics on prop is not the same with horizonal auto-gyro and front facing airplane prop. I don't agree with the comparison you made.
@philhamilton92388 жыл бұрын
Good clear info. Thanks.
@3000gtwelder8 жыл бұрын
Great video, I am going through this process right now. I bought some ZTW 30amp Spider opto ESCs, and put them on a quad copter. They are flashed with Simon K and don't seem to run right with the Naze 32 rev6 board I have in the quad. They seem to me to be running with the brake on, or the timing off. They won't rev up to full speed, and get real hot quick and the motors start to smoke. Anything flashed with BL heli works fine. I tried to flash them through the pass though feature on the Naze and using BL Heli suite, but the boot-loader is Simon K and it wont recognize them to do it I think, so I ordered a DYS USB adapter to flash them. I hope that works, because I tried the transmitter method, and it was next to impossible and the ZTW site had little if no info on how to do it with the transmitter, and what info they did have was hard to understand. I hope I didn't ruin my motors lol.
@booger373914 жыл бұрын
Edd I got idea: Maybe you be willing! A lot these planes got CG problems when short servo rods! im only fly the pusher : because don't want break prop/ and... want use expensive ..carbon prop- quiet/ efficient! what I need is a lawn dart Bumper! Can you make 1 please!!! ??? Thinking like... big spring loaded shock/also like lawn dart.. stab up in ground: want break the wing see. idk
@douglashall49288 жыл бұрын
Thanks for the great info!
@alfiana4690 Жыл бұрын
How about setting it on esc 4in1?
@cirandavideo8 жыл бұрын
Very nice explanation.Congratulations.Tks Doug fm Brazil
@arturPiolhO5 жыл бұрын
Great video! That is any way of doing this through the transmitter?
@brandonpadilla35283 жыл бұрын
Is that scar on your hand a propeller accident?
@martales8563 Жыл бұрын
a spinning prop gives less drag than a nonspinning one
@espr75648 жыл бұрын
Thankyou Ed, a top tip 👍
@Raj_yadav5826 жыл бұрын
how much long plz,
@usmandogar59464 жыл бұрын
You are a great man.
@le3045acp7 жыл бұрын
tell me i have a blheli 30amp esc and a c motor from flite test and if you turn on the brake it makes all kinds of squealing noises unless you are at full throttle or no throttle
@masons24638 жыл бұрын
Hey what would you recommend for a first time scratch build? Thanks for the help
@gurpreetjaspal8 жыл бұрын
Can you please explain how to do this with usb programmer?
@CAv-lp2qk8 жыл бұрын
Any way to set up 0 throttle braking on blheli?
@kdobson838 жыл бұрын
So you listed the benefits of the ESC brake but not the disadvantages. Are there any? Does the ESC brake use battery power?
@Disinterested15 жыл бұрын
guessing you missed the part about drag and breaking props ......... yes it does use power just not as much as driving the motor
@blakehall13488 жыл бұрын
Will this work on a naze 32 for a racing quad? If so, how?
@lurkingcorsa105 жыл бұрын
Is the brake setting ESC more useful than default.. bro?
@FLYBYMEable8 жыл бұрын
good video
@jwthomas73 Жыл бұрын
4:27 lithomilling
@AuroraCypher8 жыл бұрын
Hi can you set it that it'll stop at certain degree ? like at 3 olock or 6 oclock etc. ? thanks
@davidbrown5286 жыл бұрын
Pay attention. He said very clearly you have no control of that.
@ExperimentalFunRCss8 жыл бұрын
where can one get the program card with LEDs or one like it? I have a skyhunter and i just have a feeling a prop will be snagged at some point. Thanks
@ExperimentalAirlines8 жыл бұрын
Hobbyking, RCTimer, or many other sources. Just be diligent about checking the ESC is programmable, and with what programmer.
@ExperimentalFunRCss8 жыл бұрын
ExperimentalAirlines Ok thanks a bunch! Anouther great video by the way!
@jensonphil73505 жыл бұрын
Which is better brake or no brake at rc-boat ? (The esc have reverse function)
@Disinterested15 жыл бұрын
tbh I have never had prop drag issues with any rc boat and have never used brake in boats as I could not see a point to doing so .......... that said I am more an rc car/plane type as I no longer live where boats can be run easily
i hope one day that usb programmer comes with micro usb or usb c connector so that it can be used with phones. better yet, a bluetooth enabled one!!
@raffman42666 жыл бұрын
Where did you buy your esc programming card sir?
@rahulghosh42894 жыл бұрын
Thankyou
@TheBillcool28 жыл бұрын
what is a good programmable generic card to buy?
@ExperimentalAirlines8 жыл бұрын
The one in the video is from RCTimer and has worked with about 80% of the ESCs I've bought. HobbyKing has some too. It might be best to choose a line of ESCs you like and then buy the programmer you need for that collection.
@ufoengines8 жыл бұрын
So Cool! Hey do you know if anybody is building this drone design, Patent 6607162 ?
@averagejoe60317 жыл бұрын
Multicopter
@KrotowX2 жыл бұрын
5 years in future... turned out that ESC braking is one of dreaded things that suck battery power in multirotors and make whoop and freestyle quad flight times miserable.
@bibleerror.commustsee33945 жыл бұрын
Why on earth bother with cards and programming when all you have to do is ... 1. Battery unplugged. 2. Turn radio on and put throttle to maximum. 3. Connect battery. 4. Wait for music tone. 5. Move throttle to minimum. 6. Wait for acceptance tone. 7. Move throttle to maximum and back to minimum. 8. Confirmation tone declares engine brake ON. Simple engine brake installation only using Transmitter !!!
@ashtodust20008 жыл бұрын
Where do you get the light up programmer?
@ExperimentalAirlines8 жыл бұрын
HobbyKing or several other vendors. The one in the video came from RCTimer.
@need4drift8 жыл бұрын
Will the drag brake drain the battery faster?
@bobt2198 жыл бұрын
I don't think so. And even if it does, the drain would be so small you would never notice it. Basically the speed controller changes you motor into a generator, thus making the prop harder to turn, vs wind milling.
@need4drift8 жыл бұрын
+Bob T Ok cool. :)
@SteevyTable8 жыл бұрын
No, it actually just shorts the leads of the motor to each other. The induction of the motor coils prevents it from rotating. There should be no connection from the motor to the battery at that point iirc.
@need4drift8 жыл бұрын
+SteevyTable Cool. Thanks
@Disinterested15 жыл бұрын
@@SteevyTable you have to power the esc for this to work so yes it does use power BUT not anywhere near what you would use in flight in general
@BariumCobaltNitrog3n8 жыл бұрын
Do those work on ground based speed controllers as well?
@mountaindewdude768 жыл бұрын
I do believe the principle of "esc braking" does relate to ground models, too, although I'm sure the programming cards would be different. I'd check with your local distributor about your preferred ground product and see if they can supply you with suggestions on programming card capabilities.
@jamesboaz47877 жыл бұрын
I thought I sudded to you over a year ago. did so now. are you a teacher?
@davidbrown5286 жыл бұрын
You need a teacher. Those are dees not bees you used in subbed! ;-)
@chrisstokley76874 жыл бұрын
Thx ed- you than rc man ! :>)
@booger373914 жыл бұрын
Wow thx- nobody ever explained this before!!!! TYVM :>)…..now I got another reason my wife gripe- nickle and dime us to death ! :>) - but im going get 1 with lights :>)