Essential Settings: Ninjutso Sora V2, BEST Web Software = NinjaForce? Lightest Wireless Gaming Mouse

[@zero__i7796]

0:42 ; can anyone help? I've been trying to use the software, and It worked twice but then I had to restart my pc and now its stuck in chinese; im not fluent in chinese or anything but I read that it said I need to update the firmware. However, after downloading the firmware it js made a bunch of weird noises

[@faith-xn3gi]

did u fix it have the same problem

[@zero__i7796]

@@TheGankhypower Read the other reply I sent (just now)

[@bekzat1936]

@@zero__i7796 do you fix that?

[@mekkibaggour8424]

@@zero__i7796 where ? pls

[@rannsum]

how do i updeate it

[@KDreamy]

Amazing, Just received the mouse and this video helped me go through the process of setting it up, Thanks a lot brother!

[@3fmz148]

idk why 8k do not work with me

[@yahiresteves945]

4 months later, how is it going? Does the mouse have any problems? Like what are the pros and cons bc I’m thinking of buying it

[@tomfuegue]

Here is another owner delighted with the Sora V2. Very good "first" impressions. Thanks for the recommendations for adjustments. Greetings from Spain.

[@hawkittyhawk]

Thanks for watching! Greetings from the US!

[@hawkittyhawk]

The most common request by far has been to show off NinjaForce, the new web-based software from Ninjutso used to customize your Sora V2. It's design is EXTREMELY well done and is as simplified as possible making the process of changing settings easy and straight forward. Well done Ninjutso. Feel free to ask any questions and thanks for watching! Timestamps: 00:00 Accessing the Web Based Software NinjaForce (Chrome or Edge ONLY!) 0:39 Introduction to NinjaForce 0:48 Customization - Edit/Change Clicks & Wheel Functionality 1:20 Performance - Change DPI, Report Rate (Polling Rate/Hertz), System Mode, LOD, & Motion Sync 3:37 Macros 4:06 Power Doesn't Drain When Left On (just leave it on all the time) 4:36 Bonus Tweak/Optimization ! 5:52 IMPORTANT!!! Turn Off Mouse Acceleration in Windows!!! 7:14 IMPORTANT!!! Set Windows Sensitivity Slider to Default Setting = 6 8:03 New Issues Discovered 9:18 Is the Sora V2 the BEST gaming mouse??? 11:09 Can you go to a higher polling rate beyond 1,000 Hz using a cable??? 11:31 Which Mouse? Sora V2, Lamzu Atlantis Mini, Pulsar X2, or OP1 8k??? 12:38 How long does the battery last??? 12:52 Could you lower the weight down to 30g??? 13:22 Thanks for watching!!! Mouse Movement Recorder: donewmouseaccel.blogspot.com/2010/03/markc-windows-7-mouse-acceleration-fix.html Raw Accel: github.com/a1xd/rawaccel/releases (click "RawAccel_v1.6.1.zip " underneath "Assets" after scrolling down a bit) Eloshapes: www.eloshapes.com/ Rtings: www.rtings.com

[@tomfuegue]

Could you explain how to set a combination to change the DPI without using Ninjaforce?. Thanks in advance.

[@hawkittyhawk]

You would need to use Ninjaforce ONCE to change one of the buttons to be the DPI button. And then after that, that button that you select will function to change your DPI! @@tomfuegue

[@tomfuegue]

@@hawkittyhawk I thought you could use a combination of buttons on the mouse itself to do this during the game without having to go to the desktop.

[@hawkittyhawk]

@@tomfuegueYes, that's what the manual said, but then the manual just says go to their website which seemed to be missing the instructions. So I emailed them and they just replied! To change DPI: press and hold Right Click + Lower Side Button for 10-15 seconds. And it works!!! So glad I finally figured it out but they REALLY need to update their website and manual. You're the first person I've told lol.

[@tomfuegue]

@@hawkittyhawk Thanks so much, I knew something was missing.

[@OverlordKai87]

I would love for Ninjutso to add profiles back into their web-based software. currently when I switch game I need to reconfigure my mouse all over again which is very tedious

[@hawkittyhawk]

Agreed! It's still in beta so maybe they'll add it sometime down the road.

[@Senpax]

Problem for me is then, that they removed the DPI Button so I can't change profiles without losing access to a button.

[@hawkittyhawk]

For sure. In the manual, it say's that you're suppose to be able to change the DPI by pressing a combo of buttons but then says to go to their website which doesn't have any more info. Maybe they'll update it when they get back from vacation in a few weeks. @@Senpax

[@Senpax]

@@hawkittyhawk Sadly, most of the time you can't access the software without the mouse, so figuring out if they added a feature is pretty difficult.

[@hawkittyhawk]

Yea true. @@Senpax

[@ryqsOG]

great video, thanks for sharing so much info about the mouse

[@hawkittyhawk]

Thanks!

[@aqlifsteam8955]

Little bit insight to how the Sora V2 shape compares to Atlantis Mini for Mr. @bloody4128 On a glance these shapes really look similiar to each other and kinda look like carbon copy to each other so here's the two "MAJOR" differences: 1. The Sora hump placement are more toward the back by just a little bit, the Atlantis Mini a bit more foward (you can compare these mouse on eloshape to see it more clearly) 2. The Sora side curves is less aggresive and less tapered than the Atlantis Mini, making it feels wider in the hand compares to Atlantis Mini (you can compare these mouse on rtings 3d mouse model tool and see the mouse from the bottom to see this)

[@hawkittyhawk]

Good looking out.

[@ray.]

i currently ordered a vaxee np-01s because i’ve been using a viper mini and wanted a wireless mouse. My grip style is very odd because even though i have big hands i claw grip with 1-3-1. So unfortunately i need smaller mice as my pinky and thumb are the only finger stabilising the mouse. As im unsure as to wether the np-01s will be a good replacement for the viper mini, and i also have the opportunity to swap it with a person that has the ninjutso sora v2, my question is, would you recommend it? Considering that i need a small mouse that is similar to the viper mini and that thus has a small waist for me to grip. Also, i’ve hear that people complain about the np-01s response time (2ms) and was wondering what the ninjutso’s one was, as i couldn’t find anything on their website…

[@hawkittyhawk]

I don't have the tech to test the response time but it's something I'm hoping to get sometime in the future. Also, I don't have the NP-01 so I can't give good feedback there either. Sorry! BUT, the Sora V2 is a MUCH smaller mouse in general. AND the sides are curved in which might help your 1-3-1 grip. It's also much more narrow which once again, could be good. If your hands are smaller than mine, then the Sora V2 might be a good fit for you. Sorry I couldn't help more!

[@dwaynethewokjohnson5931]

nice vid man subbed!

[@hawkittyhawk]

Thanks, I really appreciate it!

[@frox7444]

just bought the mouse but when trying to connect on ninjaforce software it doesnt let me click connect not letting me get on the software. help?

[@lorenzograsso630]

Can you please help me when i click connect sora v2 it doesnt connect,idk what to do

[@dinibrahimagic2138]

i bought it right off release and im super happy idk even my hadn sizes or whatever grip i use i just play and it works thanks for reminding mouse accerlation i forgot that i reset my pc and had it on the whole time...

[@hottmeil8008]

Some one has a problem with the software its not working in my Sora v2 i can not connected always says sora v2 reciver or mous firmware is outdated can some one help me here ?

[@Resczak]

Lifesaver Video! Thx a lot!

[@chad_8313]

Pulsar has always had QC issues. I remember snatching up the Pulsar X2 Super Clear, only for it arrive with a defective mouse 2. Their customer service refused to pay to have it shipped back, so I just tossed it in the trash out of spite. I'm giving Sora v2 a try, so hopefully they'll get their act together.

[@hawkittyhawk]

Dang, sounds like a ton of people have had problems with Pulsar. Gonna avoid them like the plague now!

[@XadasiolX]

i haev a problem the on button doesnt work what do i do i just bought it

[@m0gg83]

I didn't know about the mouse inconsistency when you use windows pointer speed less than default or about raw accel. I'll sub to that.

[@hawkittyhawk]

Not many do, trying to get the word out there! Thanks!

[@m0gg83]

@@hawkittyhawk Try an insanely high dpi like 30k or however high your mouse can go and converting it to preferred sens feel. I swear its so much better

[@hawkittyhawk]

@@m0gg83I've done that before and actually like a lot especially for tracking. Plus, it saturates the polling rate which makes your mouse as responsive as possible!

[@BlackOrderYouTube]

is it possible to change the debounce time of this mouse? this seems like a really nice mouse for me as i did love the sora 4k but idk if this one has an adjustable debounce like the 4k version did.

[@hawkittyhawk]

At this time there is not setting to change debounce time in the settings. But the web software is still in beta so I'm hoping they add it sometime in the future. I agree that it's a really nice feature to have!

[@joe-zt9yf]

Having a VERY annoying issue with my Sora v2, if anyone has any advice would be appreciated. Basically the dongle has stopped working altogether. The mouse works fine when plugged in, and the dongle does connect to my PC as it makes the Windows sound to signify a USB device is connected. I also tested this by connecting the dongle then using my graphics tablet to connect to Ninjaforce, but Ninjaforce is saying the mouse is dead, even though it says the mouse is fully charged when plugged in. The LED on my dongle does not light up at all either. This randomly happened after using the mouse with no issue for around 2 months.

[@Julian-xz6nu]

any updates on motion sync? do you like or no?

[@Kwanty7]

i cant get in to the webside because i dont have the updated software can any one help

[@piotrmalczyk260]

Can you change the left click placement to another button and remap the left click button to e.g. Keyboard button

[@hawkittyhawk]

Yep! You'd do it the exact way I see the side button to the DPI loop but instead you'd just choose the Left Click to function as whichever Keyboard Key you'd like.

[@KieranJones-iy9po]

Hoping someone can help, I just got a Sora 4k and I got it connected and it’s working okay but i can’t get it to show up on Ninjaforce it says no compatible devices

[@kerryharris2336]

where can you purchase the 8k dongle? its not on the website, i cant seem to find where you purchase this seperate dongle. you have a link or know where to purchase. i just received my sora v2 and wanted the dongle. appreciate the help.

[@hawkittyhawk]

It's not out yet and the company is still on holiday for Chinese New Years. I'm considering getting myself too.

[@kerryharris2336]

Okay I was all over the website and didn’t see a dongle but appreciate the heads up

[@hawkittyhawk]

No problem! @@kerryharris2336

[@NoodleHolder.]

Is there a way to change dpi on the spot without software through some sort of button combo? I'm hearing people say you can, but no one says what the button combo is. And the Ninjutso website has no kind of manual for the V2. The manual for the original says to "press the dpi button", which seems to not exist on the V2.

[@xythiera7255]

Dont exist and i dont know why you woud ever chang dpi and not sens in game

[@NoodleHolder.]

@@xythiera7255 Many games' sensitivity settings don't go low or high enough, and I end up needing to change DPI instead

[@NoodleHolder.]

After all this time, I've finally accidentally stumbled across the button combination that changes dpi on my Ninjutso Sora V2. Hold RMB and the rear thumb button (mb4?) for 3 seconds. Unfortunately, this makes my preferred keybinds on a certain game unusable, and I see no way to change this button combination (or any mention of it ever existing)

[@Natheyy]

Coming from gpx1 with a relaxed claw I’m interested to see some longer term reviews on this mouse as it looks almost perfect shape and size for me (I have exact and shape as you, although my finger placement is more to the front of the mouse)

[@hawkittyhawk]

That's exactly why I'm waiting a bit to do a follow up review, so I get get some good time with the mouse in. The Sora V2 is much smaller than the GPX1 and for my hand size, I have to grip it more closely to an aggressive claw grip instead of a relaxed claw if gripping the mouse dead center. It could be used for both grip style but will depend on where you're holding the mouse exactly and also your hand size.

[@Natheyy]

@@hawkittyhawk waiting for your follow up review :). Weighing up getting this or the Helios 2 xd3 looking at eloshape graphs

[@hawkittyhawk]

Thanks! It's coming! (I just don't know when lol) @@Natheyy

[@alexgnagno6897]

Thanks for the advice on How to Adjust Windows Mouse Settings

[@SomeIrishCraic]

is it possible for future updates to be added through the software?

[@OhNyne]

Great video!! I admire how you respond to each comment on every video! I was just looking for some advice, normally I use a relaxed claw grip on my viper ultimate, my hands are 16x9. Would you recommend the htx ace or sora v2?

[@hawkittyhawk]

I don't have the HTX ACE so I can give good advice on it unfortunately. But the Sora V2 would be great for you!

[@vincesoria9387]

is it safe to close my ninja force after saving my settings?

[@MA7EX_]

but then 2k 4k and 8k hz can't be used? I bought this mouse for the weight and the 8k hz

[@Cr9mson]

I wish they released corepads for the sora v2 already Im our here trying to use the old sora skates

[@hawkittyhawk]

Same! Does the skates from the Sora V1 work with the Sora V2???

[@xded3615]

@@hawkittyhawk I got the corepads for sora v2 and they are pretty bad, the sensor skate is too small so i have to use corepads + standard sensor skate

[@ПЕРЕЕХАЛНАДРУГОЙКАНАЛ-ф6к]

Hello, can you please tell me which is better to take ryzen viper v2 pro or ninjutso sora v2?

[@hawkittyhawk]

The Sora 2 is MUCH smaller in size and shaped better for claw grip. The Viper is 20g heavier and much flatter. If your hands are bigger, I'd recommend the Viper V2 pro or GPX1/GPX2 depending on how big your hand is and how you grip the mouse.

[@ПЕРЕЕХАЛНАДРУГОЙКАНАЛ-ф6к]

@@hawkittyhawk I hold the mouse with a claw grip. My hand is 18cm long and 9cm wide. What can you tell me about the specifications, is it better than viper v2 pro?

[@hawkittyhawk]

With your hand size and grip, the Sora V2 is a great choice for you. The Sora V2 is 20g lighter weight than the Viper V2 Pro, but the Viper V2 pro is also 1.5 years old now. The Viper V2 pro is also a very flat mouse. too. There are rumors that a Viper V3 Pro might be released sometime this year since the the current one is so old but it's only rumors and it could be much longer. Both mice have extremely high end sensors that are top-tier in accuracy and precision. @@ПЕРЕЕХАЛНАДРУГОЙКАНАЛ-ф6к

[@fireemblemaddict128]

There's custom DPI options, AND the mouse comes charged to 100% I love it. Gonna throw my Vaxxee XE into a wall

[@hawkittyhawk]

LMAO!

[@glashausAimz2]

i kinda like comp, motion sync on and low lift off. but the difference is so tiny that it's hard to get a feel for it. i am going to say it: goated mouse, best one out right now. put about 200h in and it's still the same.

[@inspectahS63]

competitiv mode is the best guys ? and i cant go on more than 1000 report rate idk why

[@kelubentinganan2319]

Why my sora 4k says no complatible devices found

[@dustinmihalcheon5013]

How’s the battery life with daily use? I have a Final Mouse ULX and while good at 1000hz it’s not as impressive as I’d like. I was considering trying this mouse out as an alternative.

[@HollowRick]

80 hours in normal mode and around 40 hours in performance mode

[@dustinmihalcheon5013]

@@HollowRick I’ve never gotten even close to 80 myself that’s why I’m wondering. Maybe 60 in high speed.

[@_grayven1202]

Noob question but are you supposed to pull the cable out of the dongle to charge the mouse or is it glued in place and shouldn't be taken out?

[@Caleb____]

I have the sora 4k and should be receiving the mouse this week. I wonder if there is anyway I can connect the v2 to my 4k dongle even though i can't tell a difference between 1000hz to 4000hz when I play with my sora 4k 😂

[@hawkittyhawk]

Yea, I can't even tell the difference between 1k and 2k lol! Would be cool if we could hack the V2. I already tried with different cables but didn't work.

[@timeless3668]

Hi, I would be great to get a recommendation from you. I am currently playing on a Roccat KPU with a half Fingertip and half Palm Grip, I am coming from much heavier mice that I palm gripped, My Question is, can I still adapt to a new grip, for example go to 100% fingertip and what mice do you recommend for my case?

[@hawkittyhawk]

What's your hand size?

[@timeless3668]

@@hawkittyhawk around 20cm from wrist to top of middle finger

[@hawkittyhawk]

@@timeless3668 If you want to both fingertip grip and palm grip, the G Pro X Superlight might be a good option for you because your hands are big enough to finger tip grip it but the shape is very usable for palm grip as well. You can get the GPX 1 or the GPX 2. Both are the exact same shape and just minor differences. GPX 1 will be cheaper but is still good enough today to be considered a top tier mouse. Hope this helps!

[@timeless3668]

@@hawkittyhawk thank you very much for your advise! Are there any lighter mice than the gpx that are fitting me?

[@hawkittyhawk]

Not that I know of off the top of my head but they might be out there! @@timeless3668

[@burger1886]

Do Fire option still exsist on the Sora v2 ?

[@hawkittyhawk]

Sorry, I'm not sure what a Fire option is? Could you clarify?

[@Dad_K]

Any idea what the click latency is on the sora v2?

[@hawkittyhawk]

Unfortunately not. Im still a very small channel but I’d love to get latency tools in the future!

[@Jerry-ex5hy]

debating between this and the beast x, the main factor being battery life how does your unit hold up after 2 weeks? and do you have competitive mode and motion sync on? thank you

[@hawkittyhawk]

Competitive Mode drains the battery FAST. Like really fast. They say it drains about 2x as fast with it on and that seems about right. That being said, Competitive Mode IS noticeable faster and more responsive. Motion Sync is automatically turned off with Comp Mode is turned on. The shape of the Beast X is also very different than the Sora V2 where the Sora V2 is designed specifically for claw grip.

[@Jerry-ex5hy]

⁠how many hours you can get with comp mode turned on? Thank you

[@hawkittyhawk]

@@Jerry-ex5hyI haven't logged and tested the battery life with that mode but the website says it drains the battery twice as fast and that feels accurate. So I'm charging it about once a week or a bit more depending on how much I use it. I am checking the battery more often just to be safe BUT Competitive Mode is SOOOO good that I can't not use it.

[@Jerry-ex5hy]

@@hawkittyhawk whats the difference you feel with competitive mode on and off?

[@hawkittyhawk]

@@Jerry-ex5hyIt feels like it's more responsive. Like if I'm flicking to a target at the edge of my screen, it gets there faster. This is why I REALLY want to get some latency testing equipment because I'd love to give viewers (and myself) detailed numbers of latency, instead of "trust me bro". This channel is still really small and just a side hobby and I still haven't made a single penny from it yet, but maybe one day down the road it can fund better equipment for better info. Also, Ninjutso's website describes the Competitive Mode in a very vague and poorly detailed way where I still don't know exactly what it does lol.

[@stinky8677]

please give us your opinion on motion sync now that it’s been 2 months. is it better on or off??

[@JekksFN]

off for gaming/performance or on for quality/smoothness

[@yamsu8975]

Is there a big difference between Ninjutso Sora 4K vs Ninjutso Sora V2? I don't know which is better and which one I should get

[@hawkittyhawk]

The shape is different and the V2 is lighter by a few grams. The V2 can also go up to 8k but you have to by another dongle separately that isn't released yet. The shape and weight difference should be your deciding factors. Also, the V2 won't be available for at least another week or more.

[@yamsu8975]

@@hawkittyhawk Due to CNY holiday I have to wait to order it,so time is meaningless. I'm not likely to use either 4k or 8k. V2 is made polycarbonate. Is it a huge plus compared to sora 4k? When it comes to the weight I doubt that these few grams will make a difference for me. And the shape is practically identical. I'm looking for very good side buttons. I use them often so this is an important aspect for me. It's so hard to choose.

[@hawkittyhawk]

I don't have the Sora 4k unfortunately so I can't do a direct comparison. It's definitely a hard choice. @@yamsu8975

[@yamsu8975]

@@hawkittyhawk A rather funny aspect is that sora 4k has free delivery while sora v2 has a paid one. And I don't know why sora 4k is more expensive than the newer v2 model,maybe 4k dongle is the difference in price.

[@yamsu8975]

@@hawkittyhawk In conclusion do you think or do you think that sora 4k is much worse than v2? there are other differences besides weight,slight difference in shape and web based software?

[@spyro9979]

quick question based on your usage how many hours does Sora v2 battery last compared to superlight 2?

[@dae8894]

is this worth an upgrade from the sora 4k?

[@hawkittyhawk]

Personal choice. It's 8g lighter which isn't a lot but is enough to be noticeable. Shape is slightly different but I don't have the 4k so I can't give a comparison. Sora V2 only goes up the 1k Hz when purchased and another dongle has to be purchased separately to go higher, and it's not even for sale yet. I'd say if you're tight on a budget, stick with the 4k as it's an amazing mouse. But if you have the extra cash or can sell your 4k, then maybe consider upgrading. Hope this helps!

[@Hawhyin69]

How do you even use the macro? It makes no sense.

[@clumsykoala3699]

So dude great great review. Im on the market for new mouse i prefer wired for sure. im on a mastermouse S from cooler master and i really like the shape. its like the MM710 , but i want no holes . And the main Point is i want the software to have a "button" for second row of macros on the buttons. its called "storm tactix" for cooler master and logitech "g-shift" . Do you if these brand like endgear and lamzu have this feature? i would like to get a MM712 wired but idk what is happening with cooler master tbh. no signs of the mouse.

[@flarierza33]

I recently purchased the wlmouse beast x mini, but I'm finding it a little bit too small for my hands. I probably should hvae went with the normal beast x. Thinking if I should grab this sora v2 instead or not. Any thoughts? I prefer claw grip and I have pretty small hands (but apparently not small enough for a beast x mini 😀).

[@hawkittyhawk]

Check out: www.eloshapes.com If you put in all three mice on that website it seems to be that the Sora V2 is in between the Beast Mini and the normal size Beast. Sora V2 is better for claw grip by design but that may not matter if it's too small for your hand still. What I do when looking for new mice is: 1. Measure your hand size. 2. Look for reviews on the mice your considering with reviewers of similar size. Hope this helps!

[@Julian-xz6nu]

whats your hand size? im torn between the sora v2 and the beast x mini

[@flarierza33]

@@Julian-xz6nu about 17.5cm vertically. I also put the order through for the sora v2 earlier.

[@Julian-xz6nu]

@@flarierza33 thanks for your quick reply! the sora v2 seems a lot better value and also i wont have to worry about holes, might place an order for the sora v2 as well!

[@hawkittyhawk]

@@Julian-xz6nu19cm x 10.75cm. I always put my hand size throughout my entire videos in the corner of the video since I feel it's one of the most important pieces of info regarding picking out a mouse.

[@davidzhang2107]

my chrom wont let me pair HID :((

[@H0tCh0c0-gr3qe]

motion sync makes my aim "floaty" or like a vsync feeling on my mouse which is a big no

[@dugsssaojwvej]

Can u give a link to buy the 8k dongle

[@hawkittyhawk]

It's not out yet from what I know. I'm waiting for it too!

[@MK-lc9fp]

Hey there, may I ask the dongle came with the mice is 4k or just signal extension?

[@hawkittyhawk]

The dongle that came with the mouse is a maximum of 1k Hz. The 8k Hz dongle will need to be purchased separately. Even when plugged in with the cable that it came with or other cables, it still will only go to a maximum of 1k Hz.

[@MK-lc9fp]

@@hawkittyhawk thank you for your reply, kinda a let down since they already sold a 4k version but the V2 doesn't have the same treatment 😕

[@hawkittyhawk]

For sure but at least it's priced fairly at $100 for the Sora V2 and the $120 for the Sora 4k. It worked out for me since I'm fine with 1000 Hz anyways. BUT they should have made it MUCH more clear that it doesn't come with the dongle to go up to 8k Hz out of the box. That's been one the MOST common questions and I hope people don't get the wrong idea. @@MK-lc9fp

[@MK-lc9fp]

@@hawkittyhawk Thanks so much for your information, just order this one since the spec is just simply so good.

[@hawkittyhawk]

Nice! @@MK-lc9fp

[@niftyy.7659]

I have the 8K Dongle yet i still can't change it to 8k

[@inevyzer0337]

is the competitive worth it over hyperspeed?

[@hawkittyhawk]

Still to be determined. Unfortunately I don't have latency testing tools to compare (which I hope to get in the future). BUT Competitive Mode is noticeably faster and does drain the battery VERY fast (like they advertised). Leaning towards Competitive Mode for sure.

[@mrawu_.]

does it have the 8k hz or not??

[@bo0t3r29]

What system mode is superior in your opinion?

[@hawkittyhawk]

I'm REALLY liking Competitive Mode. It immediately feels more responsive BUT does drain the battery probably 2x as fast.

[@bo0t3r29]

@@hawkittyhawk true, i feel the same. Would be nice to have a bigger battery to be honest..

[@hawkittyhawk]

@@bo0t3r29Agreed. BUT, I've actually considered buying a custom battery that's smaller to reduce the weight even more lol.

[@bo0t3r29]

@@hawkittyhawk bro calm down haha how much weight would be endgame for u? 1 gram?

[@hawkittyhawk]

@@bo0t3r290g or less.

[@JaaY-fps]

I bought the x2h es and loved it before it broke due to qc issues. sadly, I had to go back to my modded g703 and currently looking to buy another mouse, 21 x 11 hands with a claw palm hybrid grip. I have a mouse in mind like the lamzu thorn

[@hawkittyhawk]

Dang Pulsar really has some issues. Hopefully they can fix them cuz their mice are actually pretty dope.

[@jordanjudah9241]

Anyone else having a skip/stutter every min or two? I have competitive mode on, new mouse (less than a week old), tried 2.0/3.0 USB ports, 1K polling rate, dongle and mouse has been updated. High end PC

[@fiz1018]

can you change the debounce time?

[@hawkittyhawk]

It's not in the web-software right now unfortunately but it's still only in beta so I'm hoping they add it sometime down the line.

[@fiz1018]

thank you! do you know what the deafult one is?@@hawkittyhawk

[@hawkittyhawk]

@@fiz1018No idea unfortunately. Sorry!

[@fiz1018]

k thank you!@@hawkittyhawk

[@hawkittyhawk]

@@fiz1018No problem!

[@shorowho]

Review sample?

[@hawkittyhawk]

Npoe. Bought this with my own money from their official website. I kinda prefer purchasing mice normally instead of getting stuff sent to me by companies so that way I have the full customer experience and items that are sent to me aren't cherry picked.

[@turbo49]

i hate how they don't let u choose the pulling rate

[@m4x432]

i cant see my mouse if i wanna update it

[@rannsum]

same

[@PryInto]

Thanku bro👍🏻

[@Fatal_Error_Gaming]

Man yea the software was hiding lol. Before I did that I ended up installing the software and had to uninstall. Thanks for the info man.

[@hawkittyhawk]

No problem!

[@3fmz148]

idk why 8k do not work with me

[@sumo7101]

did u buy the 8k dongle? the base dongle doesnt support 8k

[@liamlieber1745]

mouse pointer speed has no effect to in-game sentivity. it only effects your MOUSE POINTER

[@rxw]

wheres debounce time

[@hawkittyhawk]

I don't have the tech to test it out unfortunately but hopefully in the future!

[@shani9andri11]

when is the 8k dongle coming out? by the way, this is the best mouse ive ever fucking used

[@hungry6479]

hawkitty hawk TUAH!!!!!

[@gemsfalloutmyeyes]

ur a goat

[@hoangnguyennguyen6445]

my hand is 17.5x9, would you recommend me this mouse

[@hawkittyhawk]

If you claw grip, 100% yes.

[@Julian-xz6nu]

@@hawkittyhawkdo you think claw gripping a beast x mini is possible with 17.5x11 hands? i have very short fingers compared to my palm and im looking for a narrow mouse

[@hoangnguyennguyen6445]

@@hawkittyhawk yes, thanks bro !!!

[@hawkittyhawk]

@@Julian-xz6nuMaybe??? I don't have the Beast X Mini (but I want it!) so I can't be certain, sorry!

[@hawkittyhawk]

@@hoangnguyennguyen6445Anytime!

[@Fire-fj7ww]

Its weird to install the software

[@emoRR-osu]

Stop hating on accel i use raw accel and my aim really improved

[@basmus]

People who frequently change their dpi on the mouse should be introduced to the concept of ingame sensitivity settings.

[@oreo_val]

tenz

[@chencan1964]

Whenever I play fortnite it lags my game like crazy and my old mouse work fine pls hel[p

[@quzy6029]

It happens to me too, have you found a solution