Top 10 Easy Electronics Projects using NE555P Timer IC for Beginners

[@ashokkumarkamath-ki3wp]

My dady 70 years oldman your project he is trying and win i am very happy ❤️🌹👍

[@theexposer9483]

In my view 555 had been one of the most versatile IC of it’s time. You can build very useful product from it. I had built various car devices such as variable wiper speed controller, theft alarm, turn indicator with this IC. Every electronic hobbyist must try building projects from it.

[@RixtronixLAB]

Creative video, thanks :)

[@pawelitwin387]

Last project is interesting 👍 Change colors blue and red.

[@bilaltechcity8613]

Nice projects...!

[@artursrikmanis]

Cool video! And thank you for the circuit diagrams. You are fantastic!🎉

[@ranjitsian5481]

Good work 👍

[@aliriomontoya8650]

Hello friend excelente Inventos Increíbles okay 😎🇨🇴🕊🌹🌹

[@mkfmkf3625]

Thank you so much

[@Rathonxyz8739]

Bhai video ak dum Jehar hai

[@milespeterson5049]

2:30 It's not really worth using a 555 timer for this circuit, just use any NPN transistor, check the pinout and match it to some other videos. There's a whole lot of them out there!

[@milespeterson5049]

3:20 Is that a 33KΩ or a 3.3KΩ Resistor??? I don't want to mess this up. Can you please tell me which??

[@серыйкуб-ш4н]

я поставил лайк ровно 1000)))

[@_erdalbuyuk]

23:14 Long Press ON Circuit I need to trigger under 1 second, in this case what should I do to discharge the capacitor fast...? thanks.

[@estechknowledge]

You can use a lower value capacitor or you can change the 555 IC 6-8 pin's resistance.

[@_erdalbuyuk]

@@estechknowledge it doesn't matter in this case either because; I have to leave the button on for 800 milliseconds and off for 200 milliseconds, I have to finish the discharge process in 200 milliseconds after the first charge, is there any other way...?

[@kavishaperera1655]

A diode would help seperate the on and off times. Google add diode to seperate ne555 on time and off time ​@@_erdalbuyuk

[@prestonhoover8370]

I really like your videos. I have two questions. How hot is your iron? Do you have electrical schematics for your project? I am new to all this, and when you flip the board over and start doing connections, I get lost. :(. A schematic would help lots. Thanks.

[@cynnahunter7516]

would be neat if you had the schematic to go along with these builds.

[@ranjitbiswas2282]

Very good

[@planker]

excellent

[@ireshshanakawickramaarachc1121]

Hi brother,can make a circuit for glow plug timer using 555? It needs to be turned off after 5seconds time or adjustable timer.when the input power applied it should turn off output after set time by pot.but input power to the circuit remains on. Simply off delay timer with a push to on switch,(not a push button switch)

[@erin19030]

Magically soldered as you insert them. Where do I get that type of board ?

[@jlucasound]

Amazon, Alibaba, etc. Very inexpensive, too. :-)

[@ragupathis3406]

In some local electronics shop ,ask pcb

[@harshalmali856]

@@ragupathis3406 ask for zero pcb

[@JohnyIIOh]

lol none of the answers to this get the joke

[@alexkirlian]

Podia passar o ESQUEMA depois de cada circuito.... Mas... Ganhou meu like.

[@Drxxx]

Good video

[@Experiment_Club]

Great one bro

[@williamogilvie6909]

There's people who make living just making 555 circuits. Doesn't matter what you need, they will build a 555 circuit for you.

[@estechknowledge]

What you need

[@hakanbaydogmus3450]

Hepsi harika elinize sağlık teşekkür ederim

[@gabrielautomationcompany5280]

Good work

[@eswarelectronics4205]

Superb

[@alializadeh8195]

Thanx

[@lozD83]

So, why was the 555 necessary for the first circuit?...

[@Rathonxyz8739]

Aap video ke liye 👍

[@gordonwelcher9598]

I once saw plans for a radio using a 555

[@vaithiyanathanthiru8690]

Without circuit. How can i understand your project.

[@sathyapriya7720]

How much voltage of the battery and led

[@RexxSchneider]

At 3:19 that's pretty clearly a 3.3K resistor, not the 33K that the captioning shows.

[@milespeterson5049]

true.... so true, ha! I wonder how many people messed that one up.

[@themen012]

I love it, thank you, I will definitely use them

[@siyababaee4184]

Be sides no ten others are for children and good soldering you did!

[@adamfirst3772]

you missed the point... the LEDs can be replaced with OTHER things... like motors, servos, etc. these are just projects to get ideas from, not to actually build..... unless you are 9. also, many are actually incorporated in everyday appliances, like the touch sensitive switch, and light activated (photo-sensitive) lighting. your phone or tablet or tv uses it to dim the screen at night. so they arent useless toy circuits.

[@harshadsuru625]

Nice video sir.

[@lsshortsvideo178]

Nice

[@tomcat501976]

Wow, great video. Where did you get the thin wire to solder to the circuit board? Thanks!

[@estechknowledge]

That's a single string of a 1mm wire.

[@tomcat501976]

@@estechknowledge Thanks.

[@b-a-zmegyevalosag429]

@@estechknowledge Why ne555? Only one BC 547 transistor and one resistor, and working...

[@Kaydenbillu]

Bro i make the 10th one but from where can i get 5 colt dc supply , can you please tell me the easy way to get 5 volt dc plss😢

[@gamingit1]

Phone charger dumass

[@HanshaniLavanya1]

He got a pcb board finally

[@ShawnSanderson-n4h]

How about something that doesn't involve led's?

[@estechknowledge]

Here you go - kzbin.info/www/bejne/i2fVcqCnbsSsi9U

[@ShawnSanderson-n4h]

thank you

[@ArturoEco]

how much if i buy your diagram i like your simple projects

[@DonnyHooterHoot]

Ah get some modern 558's!

[@valtersouzaribeiroribeiro9534]

Cool

[@GiGa_Side]

In second can I control a solenoid with it

[@blindmonkey870]

LM358, pls!

[@vaithiyanathanthiru8690]

Values are not known explanation. How can i understand your idea

[@akshaychandranchovva]

Make 4 led chaser

[@agaldoo]

you call a "zero pcb" a perfboard. a "dark sensor" can be used as a flashlight but more efficient

[@resulyldrm7502]

8. In the project, is there a chance to make a circuit that opens and closes automatically when pressed 2 times within 3 seconds instead of holding the button down?

[@kenmoriyama7566]

Hello, I like the no.10, it is ok to use 4 leds only? And, for 3v to 3.7v battery as my supply?

[@NickBarban]

Using 4 leds only is fine. You may need to adjust the resistor values for brightness. 3.7v is fine. Red LEDs are rated at 5V reverse voltage. Just make sure to connect it the right way round

[@kenmoriyama7566]

@@NickBarban thank you for the reply. Well, I already made it. 👍

[@azamkhan-km2fj]

Good projects but without diagrams and components values

[@jamshaid447]

I want to purchase a project

[@user-dg7wj7ce5b]

best

[@carlfranz6805]

OK. So why do I cringe when I watch him solder?

[@FamTech.]

Lol, same

[@artursrikmanis]

Don't watch wtf man

[@madhavsastry4324]

I request you to please provide the respective circuit diagrams.

[@estechknowledge]

Available in the video description

[@jrm250]

What do you use for the 4v power supply in your projects? Would a 3.7v battery work?

[@ownerzennc3812]

probably :) try it

[@muffi316]

Hi Ur projects are great I need 1 help if you can. I want to make a circuit out of 555timer adjustable using pot for 10 to 60mins interval. Can you help? Thank you.

[@estechknowledge]

This video might help you - kzbin.info/www/bejne/Z6rNZ2tmf8mNl7c For 10-60 minutes replace the capacitor with 470uF and use a 1M preset.

[@sampath7579]

Sir pls schematic diagram add this vedio .very use full hat diagram .thank you

[@Rathonxyz8739]

But bhai aap thoda video ka speed bdha ke dalo feer dekho . Kyo ki aapke subscribers sayad boring feel karte honge. Bura to nahi manoge mere comment ka. but try kar ke dekhna . aap apni video khud dekhna ak bar .ok

[@estechknowledge]

Ofcourse I also feel my videos belonging. But I don't make videos so fast because, If someone wants to make this type of circuit then he/she can make the circuit with the video, that can help much better understanding the connections and wireing.

[@amartyamandal4747]

অন্ধকার হলে আলো জ্বলে ওঠা ওটা করার জন্য LDR টাই যথেস্ট 555 IC ছাড়াও হবে

[@Aidansstuff_]

Bro got the hood irony intro 💀

[@EdiSusantogadget]

Please skema number 2

[@dirk1964]

Top!!!!

[@gouspinvoon82]

Fatiguant tes ding ding...

[@omarramirez5764]

shematjcs please!

[@estechknowledge]

It's download link is available in the description of the video.

[@valentinshakhin4265]

не работает схема 26:22 Timer ON Circuit

[@swedensy]

Has anyone figure out yet how circulation pump motor works? I know it uses gate driver in IC to drive gates in IGBT. It is 3 phase too. pump name Wilo made in sweden or something. Same shit is in those compressor heater/cooler, the fans are run by PMM thats driven by weird pwm using gate drivers and IGBT. I wan to make them run on 12 or 24v DC. Any smart person here? I could even pay if you know where to tap the pcb.

[@boakyeeric3413]

Pls. You have to give a diagram. Thanks.

[@estechknowledge]

Available in the video description

[@jerzysliwak5455]

A gdzie schematy?

[@rkrawal4882]

Very little fonts write in big fonts

[@rodoespa9355]

y el diagrama de los circuitos???....que somos?....adivinos?

[@estechknowledge]

If you are asking for diagram. It is available in the description of the video.

[@hadi-s-]

Ok

[@phitrow]

Top 10 Easy Electronics Projects using ATMEGA328P ?

[@davidgari3240]

No schematics mean no subscription from me. Sorry.

[@estechknowledge]

Available in the video description

[@серыйкуб-ш4н]

жаль, что нет схем внизу видео

[@peatmoss4415]

kzbin.info?event=video_description&redir_token=QUFFLUhqa2lITnk3Mk5PV0NncDQxT0tKQkFtYVBkSW9SUXxBQ3Jtc0ttTHp2dGhRdEc5bFhya3dXcDBFQk1QVUNWTlhqTU9NcDRhRWRXNUZQY1N6MGNqcDl0TzNxM2JCZFRyeDI2Z1BjNEo2b1l4Nk5aenlvT2dDMXFCMndkcEZaZ2R5cURacVBmSEJweGNsdGxURHZCMjFfNA&q=https%3A%2F%2Fdrive.google.com%2Ffolderview%3Fid%3D1RnBLTa_8XZPD3nN-Ts9ucohFARZKChtx&v=x-dt85j9Q10

[@carlosjperezm9688]

Falta el diagrama de los circuitos

[@wolfgangn4491]

Geheim

[@carlosjperezm9688]

@@wolfgangn4491 gracias 👍

[@jlucasound]

@@wolfgangn4491 Gesundheit. I drive an Audi S5. I love it!

[@arpadszeiff]

Where can you buy parts whose pin you just insert into the hole, and on the other side it automatically cuts to size and solders itself in? 🤣 😂

[@Silly-electronics-lover]

Diagram please.

[@sirodalis5040]

А.принципові схеми де.

[@estechknowledge]

Available in the video description of the video

[@divakarankg5487]

Please ad the circuit digram

[@estechknowledge]

Available in the video description

[@robertMichaels-px3gt]

Without schematics and component identification this video is worthless to the electronics hobbyist!!!

[@lohvinserhii542]

Нарисуйте схемы пожалуйста или ссылку на схему напишите!

[@peatmoss4415]

kzbin.info?event=video_description&redir_token=QUFFLUhqa2lITnk3Mk5PV0NncDQxT0tKQkFtYVBkSW9SUXxBQ3Jtc0ttTHp2dGhRdEc5bFhya3dXcDBFQk1QVUNWTlhqTU9NcDRhRWRXNUZQY1N6MGNqcDl0TzNxM2JCZFRyeDI2Z1BjNEo2b1l4Nk5aenlvT2dDMXFCMndkcEZaZ2R5cURacVBmSEJweGNsdGxURHZCMjFfNA&q=https%3A%2F%2Fdrive.google.com%2Ffolderview%3Fid%3D1RnBLTa_8XZPD3nN-Ts9ucohFARZKChtx&v=x-dt85j9Q10 Обычно они есть в описании видео!

[@ImaginaPower]

the music makes the whole video annoying to watch.

[@arunpremi7653]

No circuit diagram, it's wastege of time and data

[@estechknowledge]

Available in the video description

[@DrQuadrivium]

The music to distracting, unnecessary and too loud.

[@chandrakantgajjar1493]

Droing aapo

[@abdelhamidarfa935]

Pas de schéma électrique explicatif

[@debelix]

Why this annoying background music, though?

[@sallimnurcahyo2578]

internet sangat buruk, muter2 trs

[@gguy156]

According to this vid ne555 is pretty useless. Which is not the case.

[@usaroman]

Very very unpolite and annoying to be asking evert 2 minutes to subscribe. You don't get. Sorry

[@LeoH3L1]

Pointless unless you're explaining what you're doing, why you're doing it, and showing circuit diagrams, and details.

[@mihijousatacosbombachaycor3883]

*((((( MUY REDUNDANTE, CANSADOR,(((Y ABURRIDO))),EL VER EN TOOOOOOOOOOOOOOOODOS LOS PROYECTOS,COMO SE HACEN LAS SOLDADURAS,UNA OBVIEDAD.QUE DEBERIAN HABERLA SORTEADO DEL VIDEO))))*

[@koziwaga]

👍🔥👏👏👏👏👏👏

[@fernandopereira3924]

O que adianta mostra tudo isto ,se não tem esquemas

[@GENESUTUBE69]

NOTHING SPECIAL HERE AND NOT ONE SCHEMATIC

[@estechknowledge]

Available in the video description

[@abhibiswas6872]

Component ka value,number kuchvi nehia bataya. Bekar video

[@estechknowledge]

Check out the video description

[@nikolaysokolov4887]

идиотское видео схем нет просто один бред

[@fernandopereira3924]

Cadê o esquema ,cadê o esquema cadê 0 esquema