Kymco K-Pipe Motovlog 07-12-2020 Mods I have done to the motorcycle

All of the the mods i have done to my bike. Leave a question or comment below.

[@Dean-b5d]

I've got the steady garage 138cc big bore kit with makuni pkw 24 pro jetted carb and aprovic exhaust.

[@BlankScreensDentist]

I bought a 2022 k pipe. Any way I can lower the seat? I'm using tip toes and I need boots on the ground.

[@etanneriii]

im unsure as im am 6ft + lean to the left.

[@jesseycoolen4169]

Hey, how did you fit that exhaust? I want to buy a fake akra exhaust but it is 51mm with an adapter to 38mm but the pipe is 25mm... So which adapter did you use and maybe a link if you can find it

[@etanneriii]

I'm from Michigan originally so i used 2 hose clamps and a sheet of exhaust tape and boom. You can get different sized exhaust clamps from your auto parts store most likely..

[@jesseycoolen4169]

So you used the exhaust tape around the end of the pipe and just putted the muffler on it?

[@etanneriii]

@@jesseycoolen4169 i used the exhaust tape like duct tape around where the slip on exhaust and the stock exhaust pipe meet and i put a hose clamp on either side and let the heat do the rest. the exhaust does have its own mounting bracket keep it in place mostly. you could also get an after market full exhaust as well the K-Pipe uses one of most cloned engines on earth. If you live outside of California you should be able to get your local shade tree exhaust guru to bend a piece of pipe for you custom for cheap. Because i live here i wanted a slip on just in case i needed to go back to stock due to Regs. Ride well.