Exactly what I was looking for, I have this kit and didn't know where to start, thank you very much sir. Perfect video
@EtherealProAV2 жыл бұрын
Thanks SteveO! Glad to help
@cosync2 жыл бұрын
u say remove the cladding.ur not actually stripping the cladding. the cladding is part of the glass. what your are stripping at the last step is the plastic buffer coating. if I stripped the cladding somehow, the light would exit the core.
@uddinislah3042 Жыл бұрын
Excellent information thank you
@duketheriddler2 жыл бұрын
Thank you for this video. Would you please do a similar video on terminating using a multi-core cable with a uniboot terminator. There are a lot of videos out there showing how to change the polarity of uniboot terminators, but I couldn't find anything about best practices for actually installing a uniboot terminator.
@StevenIsik3 жыл бұрын
Good instructions, thanks
@EtherealProAV3 жыл бұрын
Hi Steven! Thanks for watching, we're glad it was helpful! - Adam
@Kisamaism Жыл бұрын
Good, but perhaps we could get clarity on Cladding? I think we're not talking about the same thing here. Ecmag does a great breakdown in their article "do not strip cladding when stripping fibers". Thanks.
@rssaifulvai30162 жыл бұрын
Nice video 👍
@EtherealProAV2 жыл бұрын
Thank you!
@dewaldp.montgomery45712 жыл бұрын
Where can we purchase the entire kit as per above part numbers? We're a small ISP from South Africa (registered for import/customs).
@EtherealProAV2 жыл бұрын
Hello Dewald! Reach out to our South African distributor - Elan Systems South Africa (elansystems.co.za) (elansystems.co.za/contact-us/) Thanks! - Adam
@MEJBL3 жыл бұрын
Hi there, is it necessary to remove the cladding in order to assemble it to the connector? I thought removing the cladding will allow the light to exit the core and result in loss of quality? Or won´t make it a difference, once the core is fitted in the connector? Great video btw :)
@EtherealProAV3 жыл бұрын
Hi Michael, great question! While the cladding does aid with the signal quality over the long lengths, its real purpose is to keep the glass from shattering when it is bent or curved. You'll notice if you try to strip the fiber then bend it where the cladding has been removed, it will be much easier to break. The shape of the fiber is what really keeps the light inside. Think of it like when you look through a fish tank full of water, you can see in the front and out the back, but you usually can't see out the sides of the tank. It's the same concept with the fiber, you can see the end and the beginning, but the sides become reflective (or refractive really) when looking at an angle. - Adam
@MEJBL3 жыл бұрын
@@EtherealProAV I was unsure about removing it, so I stopped terminating the new fibers in my home and waited for your answer, now I will go on :) Thanks a lot for your answer, really helpful and informative.
@EtherealProAV3 жыл бұрын
@@MEJBL Happy to help! Let us know how it goes! - Adam
@Shutite3 жыл бұрын
@@EtherealProAV This is incorrect. The cladding is very important, and this video does not show removal of cladding. It shows 1) removal of the aqua jacket 2) removal of the white buffer 3) removal of the clear protective coating (not the "inner cladding"). The cladding and core remain after the 3rd step of the stripper.
@SKLS-pq6wf3 ай бұрын
nice!!!!
@JV2202 жыл бұрын
Great video. Do you have someone who can answer additional questions for Metra account holders?
@EtherealProAV2 жыл бұрын
Hello J V, Yes we do! Easiest way is to give us a call at 386-255-0234. Thanks! - Adam
@guangzhoucsttechnologyco.l58022 жыл бұрын
Perfect vedio
@EtherealProAV2 жыл бұрын
Glad you think so! - Adam R.
@ahmedifhaam7266 Жыл бұрын
Is it necessary to replace the measuring thing on the cleaver for installing the cold lc quick connector.
@SkillsBattles2 жыл бұрын
thanks
@q1uwi2 жыл бұрын
do u know if the one connect cable is fixable?
@EtherealProAV2 жыл бұрын
Hello Alejandro, Unfortunately, I do not believe there is an official way to repair the Samsung One Connect cable. It normally carries both data and power from either the panel to the connect or from the connect to the panel. I would suggest reach out to Samsung's customer support for further assistance. This page (www.samsung.com/us/support/troubleshooting/TSG01109041/) goes into detail about where to purchase a replacement cable. Good luck, and let us know how it goes. Thanks! -Adam R.
@aduedc Жыл бұрын
Where to buy Grommet for these fibers?
@jaisewak88528 ай бұрын
Price
@rosevineargallon93513 жыл бұрын
Thanks for this,
@EtherealProAV3 жыл бұрын
Hi Rose, Happy to Help! Let us know if you need anything else! - Adam
@wilfredojryoro66072 жыл бұрын
next time don't bump the tip of the cleaved fiber. the tip for sure have a crack.
@68HC0602 жыл бұрын
It says "OM3" - but how about OS2 ?
@EtherealProAV2 жыл бұрын
Great question! OM3 is a roughly 100 micron wide glass fiber, where as OS2 is MUCH thinner. You may be able to adjust the tolerances down to that level, but it would be rather difficult to get it just right. - Adam R.
@ryanrayano1132Ай бұрын
Hi I have questions can you tell me how to start work with fiber internet company I have no experience with it Please help
@bamshikattel8693 жыл бұрын
How much this misin
@EtherealProAV3 жыл бұрын
Hello Bamshi, the best way to get pricing is to contact your sales rep for your area. visit metrahometheater.com/contact-us.html/ for more information. Thanks! - Adam
@HondaCBR600043 жыл бұрын
Good video but how bout cleaning the fiber?
@EtherealProAV3 жыл бұрын
Hey @@HondaCBR60004, thanks for the question! It's good practice to clean the fiber before cleaving, however we've found negligible signal loss when we did not clean. So long as you do not touch the fiber AFTER you cleave it you should be fine as it's the end of the fiber that matters the most. - Adam
@carrieliu80813 жыл бұрын
@@HondaCBR60004 You can clean the fiber with dustless paper dipped in alcohol
@mdsaddampbt6192 жыл бұрын
কতো দাম
@EtherealProAV2 жыл бұрын
Hopefully this translates correctly. আরও তথ্যের জন্য আমাদের আন্তর্জাতিক বিক্রয় প্রতিনিধির সাথে যোগাযোগ করুন। contact our international sales rep for more information.
@rssaifulvai30162 жыл бұрын
Hi
@EtherealProAV2 жыл бұрын
Hello!
@pingfenceenterprise Жыл бұрын
Please I need kits where and how cani get one,here in ghana
@sgtpruitt2 жыл бұрын
Calibration tool...🤣
@edgardmartinez602611 ай бұрын
Wait wait wait. So you are saying no one does Manuel termination. Like using sand paper to get the core sanded down with the wheel???
@christianvizcarra930010 ай бұрын
That’s old school bud !! 😅
@edgardmartinez602610 ай бұрын
@@christianvizcarra9300 I used to do that here with the school district. I’m sure this is still done.