etrailer | Peterson Piranha Mini LED Clearance or Side Marker Light w/ Grommet Review

[@rhett5914]

Thanks wanted to see the heat shrink connection y’all use. Just a side note: After drilling the hole ~0.7” install the rubber grommet then push in the LED for the correct fit.

[@etrailer]

We are happy to help! Thank you for the feedback! www.etrailer.com/Trailer-Lights/Peterson/M171A.html

[@WilliamShepherd-v8e]

What size hole did you drill?

[@inkedupred2186]

I’m wiring led markers to my atv. Is this the same process, white for (ground) & black (hot) I wanna wire them to my headlights

[@etrailer]

Typically, the white wire is going to be the ground wire and the black will be the power wire. You can test this by connecting it to a 12V battery and it will only work one way.

[@JohnC-kc5uh]

Hey first just shove the rubber grommet in the drilled hole THEN the LED goes second

[@pugz7363]

By any chance u guys have these light on A clear lens

[@etrailer]

We have a light very similar to this and it has a clear lens. Check it out in the following link to see it on our website. www.etrailer.com/Trailer-Lights/Optronics/MCL11CAKB.html

[@CVPI03]

Do you guys have a three wire light?

[@etrailer]

Check out the following link to see the three wire side marker lights that we have available. www.etrailer.com/dept-pg-Trailer_Lights-sf-Clearance_Lights-pt-Turn.aspx

[@josevasquez6162]

How many watts is that led?

[@etrailer]

This LED light has a power draw of 0.07 amps when connected to a 12v system. www.etrailer.com/Trailer-Lights/Peterson/M171A.html