etrailer | Setting up the Curt Trailer Hitch Receiver on a 2000 Honda CR-V

[@djblitz1985]

Thanks for the nicely done tutorial video! This will help!

[@laurensims4836]

What tools are you using to take off the muffler?

[@reinaldoramos7247]

Hello, does the metal “fishing line” come included so I can fish the bolts through the center hole on to their corresponding holes? If not, what is the name of that and what sice should I get to fit the thread when “fishing” the bolt? Thanks in advance!

[@etrailer]

The fish wire comes with this hitch if you order this hitch from us. Check it out on our website in the following link. www.etrailer.com/Trailer-Hitch/CURT/13314.html

[@royalassassin6133]

You skipped a step. You have to raise the muffler back up before you raise the hitch and attach it to the middle bracket. Otherwise the muffler hits the hitch and you cant get the muffler bracket back on.

[@etrailer]

The order shown in the video is the way that the instructions state to do it. If you would like to take a look at them, they can be found on our product page in the following link. www.etrailer.com/Trailer-Hitch/Curt/13314.html

[@rafaelramirez4022]

Yes I had to this.! Royal assassin is right!

[@kisle3195]

You are absolutely right, etrailer.com rep meant to say.

[@MrHurricaneFloyd]

So, how much can a 99-01 CRV tow anyhow?

[@hostile1809]

Thats what i came here for

[@SirCharlie1723]

1,000 lbs, according to Honda.

[@laurensims4836]

I have a 1998 Honda CRV 4WD Manual. Would this work on my car?

[@etrailer]

It will! The Curt # 13314 Class III hitch fits all models of the 1997-2001 Honda CRV, including your 1998 AWD model. www.etrailer.com/Trailer-Hitch/CURT/13314.html

[@kisle3195]

Failed to mention that the center fishing hole will most likely need to be enlarged to accommodate the "carriage block" to fit through when fishing into mounting holes.

[@etrailer]

On some of these models the hole needs to be enlarged and some are already enlarged from factory. If it needs to be enlarged, you will need to drill it out to 1 1/4". www.etrailer.com/Trailer-Hitch/Curt/13314.html

[@kisle3195]

@@etrailer In all your experience installing receivers on CR-V first gens what year did you find that most holes where drilled to properly accommodate the block, or was it just random?

[@etrailer]

@@kisle3195 Unfortunately, the hole sizes are just random from our experience.

[@kisle3195]

@@etrailer Thank you

[@laurensims4836]

Where do I purchase this?

[@etrailer]

From us here at etrailer.com! Just use this link: www.etrailer.com/Trailer-Hitch/CURT/13314.html

[@jonathanvilchez7045]

I have the hidden hitch 60907 reciever for a 98 crv what is the name of the bolts and things used to tie/mount the reciever ti the car

[@etrailer]

There are several pieces of hardware for the 60907. The replacement for that hitch is part # 24790. Go to the product page for this hitch and look at the Installation Details for the parts breakdown. Here's the product page www.etrailer.com/p-24790.html If you need replacement hardware you can order everything together right here www.etrailer.com/p-RHK.html Just select "Draw Tite" from the drop down enter the new hitch number 24790.

[@GGR7]

Would this fit a CRV 1997

[@etrailer]

Yes, this hitch is designed to fit the 1997-2001 Honda CR-V. www.etrailer.com/Trailer-Hitch/Curt/13314.html

[@GGR7]

What class is it??

[@etrailer]

This is a Class 3 trailer hitch. www.etrailer.com/Trailer-Hitch/Curt/13314.html

[@speakersteve9586]

lol WHAT ARE THE TORQUE SPECS!?

[@etrailer]

Because the hitch manufacturers can change the hardware over time which can cause the torque ratings to change, we don't publish or broadcast the torque values. The product instructions are the best source for the latest torque ratings. The torque ratings are listed in step # 4 of the instructions we've linked for you. www.etrailer.com/instructions.aspx?pn=13314

[@speakersteve9586]

@@etrailer Yes I found them earlier. Thank you.