etrailer | Mount: Curt Trailer Hitch Receiver on a 2024 Honda CR-V

Click for more info and reviews of this CURT Trailer Hitch:
www.etrailer.c...
www.etrailer.com
Don’t forget to subscribe!
/ etrailertv
Full transcript: www.etrailer.c...
Hey everybody, Ryan here at Etrailer. Today on our 2024 Honda CR-V, we're gonna be showing you how to install the CURT Trailer Hitch Receiver. Before we do that though, let's take a couple of minutes, check this out and make sure it's gonna be right for you. When it comes to putting a trailer hitch on a CR-V, it makes complete sense. You know, these SUVs are really versatile and people do a lot of different things with them. So you know, if you're looking to use accessories, or pull the trailer around, or a little bit of both, this hitch is definitely gonna get the job done.
Now, compared to some of the others available, say the Etrailer one, for example, they're gonna look pretty much exactly the same, which I like the appearance of it. You know, it's gonna be completely hidden for the most part, just be able to see the opening here. But the CURT one that we have on today is more of a a gloss black finish. That's where the Etrailer one has more of a matte black. And I kinda like it a little bit more, I think it blends in better, but that is a opinion that's mine, and you can choose whichever one you think looks the best.
Couple of big questions a lot of people wonder is, you know, this hitch gonna work with all the different types of submodels, 'cause there are quite a few. And the answer is yes. Like for example, today we have a sport touring hybrid. Hitch went up without any hiccups or anything like that, so regardless of the submodel you should be in pretty good shape. And a lot of people also wonder is if this is going to interfere with your hands free liftgate assist feature.
And the answer is no, it will still work. You're just going to have to kick your foot to either side of the receiver tube opening and the hatch will open up like it should. This hitch is gonna have the two inch by two inch receiver tube opening, which is a good thing. That's an extremely common size, so a lot of stuff will work with it. It is going to use the standard 5/8 pin and clip.
One doesn't come with the hitch, but if you need one, not a huge deal, you can always grab it here at Etrailer. A lot of times if you end up picking up a new accessory, it'll come with one. So just something to think about. The safety chain openings are relatively large, easy to get to, and you should be able to use just about any size hook that your trailer might have on it. We'll grab a couple measurements now, and these will help us figure out what type of accessories will work best. From the ground to the top and inside edge of the receiver tube opening, it's gonna be about 13 and 1/2 inches. So if you have an accessory with the straight shank, these should be in pretty good shape as far as clearance goes. If you have one with a rise in it, even better, gives you more ground clearance. If you're gonna be pulling a trailer, chances are pretty good you can get a ball mount hitch that has a rise in it, probably that two to four inch range work good for most people. As far as from the center of the hitch pin hole to the edge of our rear bumper, that's gonna be about 3 1/2 inches, which is really good. So shouldn't really come running into any issues here, but if need be, you can use that to help figure out exactly if those folding style accessories can be stored upright without hitting the back of your Honda. As far as the hit's weight capacities go, it's gonna have some pretty good numbers. Maximum gross tongue weight rating is gonna be 525 pounds. That's the amount of weight pushing down on the hitch. So that's good for just about any size bike rack or cargo carrier, to give an example. As far as the maximum gross trailer weight rating goes, that's gonna be 3,500 pounds, or the amount of weight pulling on the hitch. So it is a weight of the trailer plus anything you might have in or on it. Now I do always like to suggest, it's never a bad idea just to grab your Honda's owner's manual. That way you can check in there and make sure that your SUV can handle that much weight safely. Aside from all that, a good all-around hitch. You know, looks good, and it's gonna let you use all those different accessories or pull your trailers around or both, so it really can't go wrong. As far as the installation goes, it's really not too bad. Nothing super involved, so just take your time, you should be in pretty good shape. But with that said, why don't we go ahead and pull into the garage and get started on it now. To begin our installation, we're gonna be underneath the back of our CR-V, and we're gonna have to let the exhaust come down just a little bit, give us some extra space to work. So prior

[@tomzuehlke5762]

For the 2024 CRV EX-L, there is an electrical connection that snaps into the rear body frame that prevents the holes in the hitch from lining up with the bolts. Remove the connector from the frame and push it up above the hitch (I used a pair of needle nose pliers), and everything will then line up.

[@heclock]

Came here to the say the same thing. Its a small connector that's on the driver's side. To add it it, the small plastic shield doesn't need to be cut as much as he showed. Curt Hitches come with instructions that specify to install the shield AFTER you install the hitch as well as how much to cut. Lastly I'll add, DON'T torque the bolts until ALL the bolts are in. Had to loosen them a few times just to make the bolts clear the slots, finger tighten them all first then fasten/torque.

[@jennifercorrea8890]

Thank you for this install video on the CRV hybrid model; particularly the one with the lift gate sensor.

[@etrailer]

You are welcome, hope it was helpful! www.etrailer.com/Trailer-Hitch/CURT/C13397.html

[@willjung8958]

Thank you for this great video.

[@etrailer]

We're glad you liked it, thank you! www.etrailer.com/Trailer-Hitch/CURT/C13397.html

[@C4MS]

Does this fit the crv 2024 hybrid?

[@etrailer]

Sure does! Curt confirms that the # C13397 hitch fits all models of the 2024 Honda CR-V, including the hybrid. www.etrailer.com/Trailer-Hitch/CURT/C13397.html

[@JRF1100]

Does this hitch fit the 2023 hybrid sport as well? I’m having a hard time finding the correct one for the hybrid version.

[@etrailer]

Sure does! According to Curt, the # C13397 fits all models of the 2023 Honda CR-V. www.etrailer.com/Trailer-Hitch/CURT/C13397.html

[@jh61]

Does the E-trailer version also come with those bolt wire guides?

[@etrailer]

Absolutely! You can see the parts list in the install instructions that I've linked below: www.etrailer.com/instructions.aspx?pn=E98848

[@fallengundam3950]

How do you guys get the rubber hanger on the exhaust off? You guys mentioned a technique but you don't show it

[@MomoHaid]

Use a pry bar on the rubber

[@BobWilson84]

Spray with wd40 or soapy water first.

[@alexander15551]

I sprayed soapy water and bought the cheap 3 pack of pry bars in harbor freight. Was still very difficult to remove, but not impossible

[@travisnatrop1977]

Hello, I own this CRV hybrid model and the manufacturer trailer weight is 1000lbs and 100 lb tongue weight. Where did you find the numbers in your video?

[@etrailer]

The weights we mention in the video are the capacities for the hitch itself, which will be limited by the capacity of the vehicle, if it's lower as it is in this case. Because the capacity of the vehicle is lower, the hitch will have a 1000 lb towing 100 lb tongue weight when installed on the vehicle. www.etrailer.com/Trailer-Hitch/CURT/C13397.html