EUC turn technique . My top 6 methods

[@driket54]

This is the most comprehensive, visual, concise and exhaustive tutorial I’ve seen on the subject. Great job 👌

[@MurfatlarAII0]

You very good at explaining tips and exercises . Thanks for your content ! 🎩

[@Delko-615]

As a new rider these simple break downs are very helpful. Thank for sharing

[@fidy8dub]

Even though I do all these styles it’s actually awesome to see it broken down as we tend to do it automatically. Cool vid bro!

[@Pounderino]

I’m here for this type of stuff. I’ve never looked at another tutorial I just bought one and learned to ride.. now I want to fine tune. This helps a lot. Keep it coming.

[@ДенисАлександров-б6ч]

Коротко, понятно, качественно и смотреть соответственно очень приятно. Прям учебник по колесу. Моё почтение 👍.За музычку отдельный респект.

[@levelfift33n]

so much detail. this is one of my favorite instructional videos now 👍

[@rcgldr]

EUCs are turned by twisting and|or tilting them. Method #1 requires the EUC to be tilted inwards while rotating shoulders, otherwise rotating the shoulders will result in method #4's counter rotation. Method #6, on EUCs with big gyro effect, more accurately described as angular momentum, the EUC resists being tilted due to that angular momentum, and requires applying inwards pressure on the outside upper pad which will coexist with putting outwards (sideways) force on the outside pedal, which is why spiked pedals should be used, to prevent from slipping off the outside pedal. At these speeds, a rider leans much more than the EUC is tilted, so the rider hangs off as seen in this video, which makes it easier to apply that inwards pressure on the outside upper pad. Twisting an EUC to steer is mostly done at low speeds. For tilting an EUC to turn, I think of 3 basics methods, #1 pedals only with no pressure on the upper pads, #2 pressure on both inside and outside upper pads, #3 pressure only on outside upper pad.

[@adrenalineaddicted2551]

That is very informative and deeper explanation of technic . Everyone do this by filling , because there is no any school of advansed riding , like in any sport as skis etc

[@vinm8297]

Thank you for the tips, I’m going to test them out when I get home!!

[@markifi]

nicely explained. excellent job

[@MONOVIBEs2KX]

The video I didn't realize I needed. I spend the majority of my rides using #1 and #6 🤙

[@snappybean]

Man, I needed this one. Thanks!

[@lucmarcoux2144]

Love it, I like the standing posture examples given in the park. You found what I needed to comprehend turns and carving. Dude... can't way to go try this out. You're officially in my book marks!

[@bobbybushay185]

Breaking down each movement in the limbs is very necessary excellent video!

[@user-lw6sp5pk1y]

Excellent. You also included that some techniques are speed dependent. Most tutorial videos omit that part. At higher speeds, turning techniques will change due to gyro effectiveness. Took me a few months to figure that out.

[@JorgePerez-og4kl]

Wow. Been waiting for a vid like this. While I do all these style regularly. Codifying my own movements is even more empowering. Thanks making this

[@JonnyK42.o]

Nice explanations brotha. Love the video! Chill vibes all day!

[@roadtrip6075]

oh wow, very nicely illustrated!!!!!~~~~ Spectacular!!!

[@dhdclub]

Great explanation.I am just just just starting leart to ride my EUC a I am mixig some styles you've described together. I seems to me useful to learn them separately to get better at those skills. Thank you for great explanation!

[@estevanlopez891]

Awesome video

[@BIGboiFASTboi]

beautifully executed... what a wonderful viewing and educational experience!

[@sergeibabenko4209]

🎉🎉Молодец 👍🤝👏

[@datAero]

great channel subbed

[@Rejysty]

Nice 🙂

[@mingz3030]

Best training video ever

[@Soeks77]

Kinda like turning while wheelieing a bike, you pivot your lower body while dragging your upper body with you at slow speed, or on a bike pivoting your shoulders

[@TheCobaltsaber]

Great tips. I find myself riding with a combination of all these methods depending on the speed I am riding. All super fun. The most fun method is the last one, but also the most tiring imo

[@erickvg76]

Thanks 👍

[@srqTactical]

Thank you so much!

[@paulbishop7399]

have naturally learnt four of these so far, great vid. SOmeone needs to put it to music though you got some good moves there :)

[@SergLit]

Thanks for intrecting think for euc turn technik. I always use 1-2 this trchnik but nessery mind for all

[@haroldsmith45302]

Good tutorial, thank you.

[@Planet-ICELAND]

good points

[@SAVY_JAX]

Freakin awesome video, dude! I wish I could whip my EX30 around like that. I’m not there yet.

[@DonovanWert]

Awesome 😎 thanks brother!!🙏

[@methticaal3372]

so smooth 😎

[@senseivegan]

Excellent Tips!!🔥🔥 Thanks for sharing!

[@paulbishop7399]

ok when carving, place weight on outside foot befiore initiating turn. move your body weight inside the radius of the corner, leaning your outside knee against the wheel. This allows the wheel to stay more vertical at high speeds and reduce wobbles. Similar to your technique where you describe but placing importance of weight on outside foot during the turn. The gyro will keep the wheel vertical even on smaller 16" wheels.

[@georgieman1910]

#6 is similar to how motorcyclists hang off a turn. Open up the hips and legs, stick the knee out, keep the center of gravity low and inside the corner or turn. There is one more way to turn and that is the stop and twisting of the tire in place to face the new direction.

[@JeffersonMutrica]

Thank you 😊

[@MichaelYudkovych]

Взірцеве відео такого типу: коротке і при цьому дуже інформативне. Класно придумав показувати рухи і у статиці, і у динаміці на прикладах - так набагато краще зхоплюється. Для себе відкрив "хвилю" - я до такого не докумекав, треба буде спробувати, як колесо з сервісу заберу. =) І щодо її комбінування із нахилом колеса коліном - це схоже на техніку "контрруління", якщо я не помиляюся. Останній спосіб - з мотоспорту, і виглядає відповідно круто. =)

[@adrenalineaddicted2551]

Дуже дякую , приємно ! Так , контрротація там теж є ) Це відео із серії "кататися навчився , а тепер дай ка подумаю , що ж в біса я роблю "

[@MichaelYudkovych]

@@adrenalineaddicted2551 думаю, це про більшість монокотів - проте далеко не всі починають розбиратися з тим, що ж вони "в біса" роблять. =) І ще й так докладно. Тож продовжуйте, класна ініціатива!

[@evilpitonschannel435]

1, 2, 4 способ использую постоянно.)) 6 способ очень классный, но на резине 2. 5 страшно. 😮. Музыка отличная. Спасибо))

[@Padel84287]

Is it Kyiv in the last epizode of video?

[@adrenalineaddicted2551]

yea it is

[@Padel84287]

@@adrenalineaddicted2551 cool, I am from Kyiv too) one question, which teqnique would you use for to turn around in very small space? I have v14 and sometimes it is not so easy

[@mbelozerov]

Did you use the tire spacers in your video?

[@adrenalineaddicted2551]

Nope . I like gyro effect of this tire as it is (medium) . Tire is michelin pilot street

[@Tobyzguy]

Interest. I started with method 4 as I have a background in acoustic unicycle riding. I've had to learn the other methods

[@papalimamike]

Hi ! Perfect tuto ! What is your troucer with protect ???

[@adrenalineaddicted2551]

Hi ! Thank you ! I use Alpinestars Bionic Tech V2 under jacket or REVIT ECLIPSE in summer

[@papalimamike]

@@adrenalineaddicted2551 thankssss and for your pants ?

[@adrenalineaddicted2551]

@@papalimamike just regular pants and knee leat dual axis guards

[@ОлександрОлянчук]

Дуже корисні рухи, дякую. Особливо з важким колесом.

[@kurtwylde2332]

Hey do you know anything about how to combat lower back pain?

[@adrenalineaddicted2551]

Hi ! Sorry Im not a specialist and dont have this problem

[@CapitalWheeler]

I can't hula-hoop but I'm going to learn this.

[@Riceman-o1p]

It takes dedication but you're gonna love it! It's the funnest toy I've ever had in my life. I'm 58 and just starting to get good.

[@CapitalWheeler]

A couple hours and I'm sore and humbled@@Riceman-o1p

[@andreaslaner6024]

Great,great Video - i learned a lot from this video. One question please - if you ride a bit faster into a 90 degree curve - how do you position your feet ? Or which methode do you use ? Thanks....

[@adrenalineaddicted2551]

Thank you ! At medium and high speeds I use carving . Next week I will make new video about carving and speed depending turning . But I want to mention , that lighter wheels or wheels with tire that have less gyro effect you have to use less preassure to turn and carving in that form I use can be impossible . Technic is very wheel\tire depending and you have to find perfect style for you and your EUC

[@andreaslaner6024]

Thanks very much ! You are a great driver ! Nice greetings from Austria !

[@ShadKS18XL]

О, Киев... Труханов... Давно там не был. Как обстановка сейчас, ТЦК не мешают катать?

[@jonislow]

Great vid! New sub here!

[@fqqures1019]

which euc you are riding? I just got the begode master and learning to be able to carve smoothly, its not as easily as on my Patton

[@adrenalineaddicted2551]

This is Begode ex30 . Good luck in carve mastering 😉

[@WheelKim]

오소 테크니컬~~ 후진좀 가르쳐주세요

[@73458AK]

superrrrr+555555

[@onursariyer1000]

Süper. Thnx for sharing.

[@senseivegan]

Are you riding with the stock air shock?

[@adrenalineaddicted2551]

nope . FOX RACING K FLOAT DPS

[@senseivegan]

@@adrenalineaddicted2551 Awesome! Thanks for the info.

[@adrenalineaddicted2551]

thx for comments 😉

[@senseivegan]

@@adrenalineaddicted2551 Your welcome

[@miked250]

How's the air compared to coil? ​@@adrenalineaddicted2551

[@chris9660]

This is very informative, but how is one method superior into different situations?

[@adrenalineaddicted2551]

I tried to do my short overall view based on my experience . I think this can be a topic for next more ditailed review

[@B-RaDD]

Algo

[@antonlebiedyntsev7864]

кайф, Київ!

[@cap4408]

Ukrainian subtitles? Subscribe:)

[@adrenalineaddicted2551]

попрацюю над цим )

[@cap4408]

@@adrenalineaddicted2551 буду дуже вдячний, бо не все розумію на англійській

[@sergiodoctorino4553]

🤠Хм . Я такого в инете ещё не видел. Очень полезно будет ,особенно начинающим 🤘