EUFY ROBOVAC 11s SLIM STUCK BRUSH FIX 11S 30C 15C 30 35C 12

[@sbatstg]

you are The Man!!! I couldn't figure out why the brush seemed wider than if should be... I had no idea about the capped bearing. cleaned it and was back in business. Thanks for posting this video!!!

[@AlsAutoandAppliance]

Thank you for commenting! It's so satisfying to see when viewers get their stuff fixed. :)

[@greggl54]

Awesome. Thank you for getting my 11s up and running again. I'm just amazed how repairable these are.

[@AlsAutoandAppliance]

Any time!

[@meyerjeh]

Ewwww I can’t believe how much hair was so tightly wound around that thing inside my vacuum!! Shocked!!! Thank you for your help retrieving that out ugh. Vacuum is operating normally again now!

[@AlsAutoandAppliance]

So awesome to hear you got yours cleaned out and running!

[@ricksnee]

Dude, you saved me from a long rabbit hole of taking it apart to clean the motor housing. I had no idea that cap spins.

[@AlsAutoandAppliance]

Glad to be of service!

[@soon2beninja]

I knew it had to be hair caught in that cap BUT I DID NOT KNOW I COULD TAKE IT APART!!!!! You sir are the realest.

[@AlsAutoandAppliance]

Awesome! Glad to help!

[@jrewillis]

This was exactly what was wrong with my brush bar! Thank you! I’d cleaned the whole brush but it was stuff stuck round the bearing that isn’t immediately obvious. Legend!

[@AlsAutoandAppliance]

So glad this helped! Thank you for commenting. :)

[@pyaricat4388]

You're the man!!! Had a bunch of hair wound up around the bearing shaft, cleaned it up and vacuum is as good as new. Thank you veyr much

[@AlsAutoandAppliance]

Great job! You are quite welcome!

[@andreagallardos.8751]

It was exactly our problem, Al! Thank you very much. Andrea from Chile.

[@AlsAutoandAppliance]

Awesome! You are welcome!

[@OrangeSalamander]

I can't thank you enough for posting this video. Thank you, good sir!

[@ebonitepens]

Thank you very much for this video. My brush was so much jammed that the bearing cap would not move. A ton of hair was looped under the bearing. Thankfully no melting damage there except for some scoring on the bearing cap.

[@AlsAutoandAppliance]

Glad you are back up and running!

[@JayHanley]

Great video! Couldn't believe the amount of dirt and hair that got in there.

[@AlsAutoandAppliance]

You and me both!

[@anandakshay]

Thank You so much for posting this video!! My Eufy 11s is working fine since I cleaned the brush parts as mentioned exactly in this video!!

[@AlsAutoandAppliance]

Fantastic! Glad you are back up and running again. :)

[@GazeboDweeb]

YEAAAASSSS! This is EXACTLY what I was looking for. These vacuums don't do well with long hair. THANK YOU!

[@AlsAutoandAppliance]

You are welcome! We have three people in our home with long hair, so it's a constant battle keeping eufy running well!

[@GazeboDweeb]

@@AlsAutoandAppliance how often do you clean your robots?

[@AlsAutoandAppliance]

@@GazeboDweeb I would say every other run we have to remove hair. It really diminishes the effectiveness of the brush and it gets to where it doesn't really pick anything up if we let it go longer. As for the bearing, we only had to clean it once since this video was posted.

[@GazeboDweeb]

@@AlsAutoandAppliance THANKS! We run ours on schedule every weekday, so that would be like 3 times a week for us.

[@judybagnall3250]

This worked for my eufy 30. Thanks for posting this fix.

[@AlsAutoandAppliance]

You are welcome!

[@biwinner89]

Top man. Fixed my problem 👍

[@AlsAutoandAppliance]

Awesome!

[@Nicoriss]

Hi, I have a problem with the brush as well but not this one. Mine is that the square part is getting rounded and doesn't engage in the transmission (the white part inside), I'm also afraid that the transmission is rounded too. Any suggestion?

[@AlsAutoandAppliance]

A common issue on these is the square in the gear does get rounded out. The fix for this is to replace the gear (and possibly the brush) or purchase a new motor assembly from eufy (about 20 USD). If you go to thingiverse.com and search 11s Gear (or whichever model you have) you will find printable models to print a replacement gear if you wanted to try that route first.

[@tinabizulisdaggett7230]

It's the other end of my brush that won't spin freely. I did follow your video and confirm the bearing and cap side was clean. Any idea why the other end won't spin freely?

[@AlsAutoandAppliance]

The other side does not spin. That side (square protrusion) engages with the transmission that's inside the robot. Are you getting a fault?

[@nolan4500]

This worked for me! Thank you so much for the video.

[@AlsAutoandAppliance]

Awesome! You are welcome!

[@jeremielongpre4118]

Was about to order a new motor from china.. thats the real fix

[@lesleyhughes3846]

Thank you so much! This was exactly the issue I was having.

[@AlsAutoandAppliance]

You are welcome! Glad you are back up and running!

[@MarieClaireShin]

Thank you for this video! My vacuum works now :)

[@AlsAutoandAppliance]

So glad to hear this! You are quite welcome!

[@janetteharris3477]

Hey there! Where do you buy spare parts from? I love your videos on these units. I repair all my Robovac's with your help. Thank you!!

[@cerp62]

Amazon... i have bought roller and filters

[@drsaravanaperumalb7264]

Thank you for the good video. My eufy robovac 11S Slim having error 3 continuous beeps. How to correct. It’s not charging also.

[@AlsAutoandAppliance]

Is it beeping with a continuous red light or blinking red light?

[@helenamcallister]

Thank you for this! Very helpful.

[@ferhatozeren99]

Thank you for this video i solved my problem thnks a lot

[@AlsAutoandAppliance]

That's great news! You are welcome. :)

[@PaulJulienVAUTHIER]

I had the same issue, thank you for the video 🙏

[@AlsAutoandAppliance]

You are most welcome!

[@MarvRetro]

thank you so much

[@AlsAutoandAppliance]

You're welcome!

[@85499418]

muchas gracias

[@AlsAutoandAppliance]

de nada!

[@Nicoiriarte]

Gracias!

[@AlsAutoandAppliance]

De nada!

[@Traubu]

good guide

[@AlsAutoandAppliance]

Thank you. 😊

[@rbdjohnson1]

thanks, this works

[@vBDKv]

This is how they keep people buying new brushes.. Sigh. My Roomba brush (and rubber thingy) lasted well over 3 years before I had to replace it. Eufy recommends replacing the brush every 6 months, filters 1 month. I can think of plenty of other things that I could spend my money on instead, such as a meal at the local pizzeria. There's no reason at all that these parts should be replaced so often. Even the brush guard is designed to malfunction after a certain while. It's disgusting.

[@AlsAutoandAppliance]

I agree 100% on this. With that said, roomba has started using rubber brushes that seem to work very well and they are super easy to clean too.

[@patriciax5951]

I just bought eufy 30 and noticed that the side brushes sweep the wheels every rotation. Will this deposit dirt and hair into the wheel base? Yes. Will this reduce the time before maintenance is required? Yes. Amazonbasics rb1 runs with far less maintenance, though it doesn't have the carpet beater brush so it's not directly comparable. I found a good maintenance video suggesting that a crevice tool will vacuum dirt lodged around the wheels. kzbin.info/www/bejne/iJ21ZJ-rYpKkfrc

[@jackie415]

tysm!! it helped