EVANIX REX P 45 installing the AAO T Rex2020 Supervalve and Magnum Hammer Spring

[@UpNorthAirGunner]

Dude! That is literally the simplest mod EVER! After shooting with Chad Simon with his Evanix Rex .357 with AAO kit I was hooked! This gun is getting added to my list for the 2020 Deer hunting season!

[@AfricanAirOrdnance]

Nice compact powerhouse

[@joey0077d]

Sweet upgrade!! Thanks for showing how it’s done. 👍🏼

[@BushCampingTools]

Fantastic. Been thinking about one of these beauties

[@royweatherford64]

His valve and bottle set up turned my .50 into a monster, my wife killed two pigs with it within 5 minutes of each other and both were clean pass through. I’ve also shot it over a 100 yards with a 240 grain at 3 mildots. I actually have videos one one pig kill and the long shot

[@brandonclem2017]

I have the gamo tc35l. Do they make that for the 35 ? It's the same gun just longer and it says Gamo.

[@arnoldtm31]

Hi, are the valves different for different calibres? Is the bottle thread m18×1.5?

[@AfricanAirOrdnance]

Hi the 30 cal and 9 mm use the same valve the 45 and 50 cal use the same valve

[@brendancasey1820]

This setup is so badass! I was wondering though I saw another guy on here use a gamo TC45 tank on his 50 cal pistol and he didn’t say anything about changing the hammer spring. Is that absolutely necessary in order to run a bigger tank? What are the advantages of changing the hammer spring?

[@AfricanAirOrdnance]

You wil find he was simply running a factory original valve on bigger tank this would not require a hammer spring change Our T Rex Valve is much more powerful than the factory valves and requires a much stronger hammer spring to open the valve bottle size has no impact on power only shot count

[@2011italianoboy]

The regulator valve can only be used on the new tank and not the factory tank? Actually, I just went back and watched the video and the factory bottle has male threads and the new bottle is female, where the new valve can only be threaded into a female threaded bottle.

[@AfricanAirOrdnance]

Valve can be used on both the original bottle or a new bottle that said using on the original Evanix Bottle u are limited to 250 bar so you wil have more power but not as much power as using the T Rex Valve at 310 bar also you get more shots at 310 bar than 250 bar

[@2011italianoboy]

@@AfricanAirOrdnance ok, thanks for letting me know.

[@visamedic]

Sorry if this was mentioned, but where do we get this? Can you put a link in below please? Sorry. Disregard 🤓. It’s your product. Thank you looking forward to doing business with you.

[@royweatherford64]

Google African Air Ordinance and all of his upgrades or on his website , that’s where I ordered the one I have.

[@visamedic]

@@royweatherford64 Thank you. Yeah. I caught that. Can’t wait to get this thing. It was a toss up between this and the Hammer. The upgrades made the decision for me. 😁👍

[@bubbleone6526]

New sub. Are you going to be doing some numbers after the install?

[@TingILi]

Where can buy this solution?

[@bushwhookie1334]

how much for bottle and spring upgrade and where to get it

[@isferfun3909]

Very nice simple and clean upgrade. This one will be a very nice powerful backpack airgun. Does the tank need to be empty to safely separate the pistol and air tank to carry in backpack?

[@AfricanAirOrdnance]

No it does not can be stored full

[@isferfun3909]

@@AfricanAirOrdnance Cool. Good to know and am getting ready for next buy with Air Bandit.

[@Estrada6sixseis]

Excuse my ignorance. But I would like to ask. Do I have to make sure the tank is empty to remove it or it doesn't really matter. Same when I'm adding the new one. Can it be full or it doesn't matter? I would appreciate if you could help me whit this questions I'm definitely looking forward to buy one of these and some extra fiber glass tanks but tbh I have no idea about pcp . Nice video btw💪 thank you for the info.

[@AfricanAirOrdnance]

When removing the valve and bottle there is no need to empty but if you remove the valve from the bottle then you have to empty the bottle

[@PaulAtreides682]

Thanks !

[@michaelgauger2306]

Why does African Air Ordonance not deliver to Europe...? There is no possibility to order on the official website and e-mails with questions doesn’t get answered...! What‘s to do...???

[@AfricanAirOrdnance]

Sorry for the very late reply did not see this message we ship worldwide if you need to order anything [e-mail]

[@michaelgauger2306]

@@AfricanAirOrdnance Thank you for your answer, but I can not see any options to order for Europe on your website…??

[@AfricanAirOrdnance]

@@michaelgauger2306 you can email me directly to order [e-mail]

[@duanehopland7506]

Gotta get me an evanix rex-,p and your upgrade !

[@duanehopland7506]

Does the rex p 50 shoot .495 or .498 ? Can't seem to get any info on this anywhere?

[@akseminole]

I’ve read .495

[@duanehopland7506]

@@akseminole Thanks it's .498 but some shoot .495 I found out.Thank you for responding

[@duanehopland7506]

@@akseminole got one on the way and bought some of both to try

[@BigFun4Life]

Awesome...!

[@airgunsandcraftsmramos2579]

Man! I love this gun, its so light. This is the ("diy") video I've Been waiting on, for so long, i am really glad... Im just wondering, due to the large quantity of orders, could i expect to receive my package within a timely matter or will i have to wait months?

[@AfricanAirOrdnance]

Ships withing 48 hours of you placing your order

[@SquirrelDarling1]

Will this work on the Rex rifle as well?

[@AfricanAirOrdnance]

Yes it works on the Rex Rifles and Gamo Tc

[@lpettiford3]

Do I need the spring for the 50 cal?

[@royweatherford64]

I believe you do with his valve setup, I installed the valve ,spring and one spacer and still short on power after I added the second spring spacer and went up to 4000 psi I was getting 311 fpe with a 240 grain

[@damc4356]

New year wish list to evanix company Evanix Rex 50 cal pistol upgades of; *larger air tank *Telescoping stock *over air tank or folding air tank stock *Semi auto fire as your air max is done *Clip feed

[@jameycorbett8468]

I’m interested in a lot and what you do with the evanix. I own the Rex 357cal. I’d like to put a quad rail on and having trouble figuring out how. I see you have one on the pistol. Could you help me out? Be happy to trade emails or phone numbers. Thank you for your time.

[@YAYA-bn4pf]

So we can just buy multiple tanks,fill them and put them in a backpack or something,then when the tank on the gun is spent you can just screw on a full one? IDK why PCP manufacturers arnt making the air tanks interchangeable like this. It's much easier to have a few full tanks in a pack and just swap them out as needed.

[@akseminole]

I’m pretty sure that the limiting factor here is money, the valve kit is $535, so yes, you can carry multiple tanks, but each tank requires the valve to hold air.

[@bstiemnangsanbaythanhhoa5804]

Like condor

[@carlosugarte1450]

Wow, the easiest upgrade I've seen!

[@carlosugarte1450]

The easiest upgrade for a big bore!

[@henriquemarques5746]

457cal valve big bore artesanal projeto

[@lmbhunter8706]

Is very large ammo over 200 grain for .50 cal? Do you install the second spacer on top of the first spacer then the hammer spring?

[@AfricanAirOrdnance]

Yes you install both spacers infront of the hammer spring