A few tips for anyone watching. The nipple on top you swapped from the old cannister to the new was tricky to remove. You need access to the inside where the 4 inner clips are. This means cracking open the small case with a flathead and hammer. Even then you need a second pair of hands to bend all 4 clips in at once and push it out. Removal of the metal clips from the old canister takes a small flathead inserted in the hole and pry up on the bent portion of the inner metal piece.
@jjdevane78702 жыл бұрын
Where would I be able to find the nipple piece? A dog chewed mine and having a hard time finding one
@crueljimi Жыл бұрын
dielectric grease is your friend use it on o rings and electrical connections to prevent oxidation and corrosion...
@That119compact3 жыл бұрын
To give you some insight to longevity, i have a 2012 6.2 F250, 234k miles with minimal repairs, alternator, front end parts, shocks and as you could guess by the video im commenting on, charcoal canister....
@hellsscoutact53792 жыл бұрын
i have a 2020, f 250 4x4 6.2 motor thats shutting of the pump. dealer installed new charcoal canister. still shuts off the pump. they scratching their heads and say they never seen the new canister not work because its the updated one for the problem. i told them about all the videos on youtube. they acted like hell they never thought of that. i told them about the purge valve under the hood. pointed it out to them. they not sure they need to change it out. i told them to install an entire new system. gas tank, and every other part in the system including the harness system to it. its still under full warranty so i said its on the them. JMHO they just looked at me with the oh shit look. i told them i will post my thoughts about the problem and dealership on youtube. JMHO
@gersonalvarez48653 жыл бұрын
Wish you showed when you took off the connectors, having a hard time taking it off
@rosslovesboys3 жыл бұрын
We had to compress the fittings on each side with needle nose grip pliers to pull those bastards off.
@Jeff-o9g Жыл бұрын
Clean up corrosion with baking soda and vinegar.
@suunto612 ай бұрын
Got a 2012 F-350 Dually RWD, big cab and bed, 6.2L Gas. Only 55Kmi. Is used as an emergency vehicle on race tracks. Need to figure out why it is complaining about the gas cap.
@pseudonamed31283 жыл бұрын
@jeremy fixit Where does the other end of the vent tube at 9:20 in the video go? I just bought a 2010 and that tube is just looped over the front axel and it looks to have ripped or been cut off by the previous owner. Thanks in advance!
@krisssilco3 жыл бұрын
I can't get the blue connecter off. It's the one above the red one. Any tips? The red one was easy. Do you have to pull on the blue one or just push it in like the red one
@mdburns69 Жыл бұрын
Would you share the link to where you purchased your code reader?
@Half_acre_farmer Жыл бұрын
us.bluedriver.com/pages/bluedriver
@Yasin_Abdul2 жыл бұрын
How did you know that was the problem? What code was you getting with the check engine light? I have a code that came up P1450 which I changed the Evaporative Emissions (EVAP) Purge Control Valve and the check engine light is still on.
@lveneno24383 жыл бұрын
Dou you had any time delay in the gas refilling proces before replacing the selenoid?
@lveneno24383 жыл бұрын
@@Half_acre_farmer it seem like I have the same problem on my truck. That's the only problem. Runs fine with no problems it just throws 2 codes (p0451 and p1450)
@lveneno24383 жыл бұрын
@@Half_acre_farmer probably the same thing. I'll let you know if that was my problem
@charlesturley35453 жыл бұрын
I have the same issue, just no codes. I've been dealing with it for about 3 years. I turn the pump handle upside down and can typically get 2-15 gallons at a time. Sometimes it's 1 gallon at a time, haha.
@aarondonohoe62293 жыл бұрын
@@Half_acre_farmer Did replacing the charcoal canister fix your refueling issue? I have a 2013 F250 with 200k, and can only put in about 1/2 gal at a time before the pump kicks off
@lveneno24383 жыл бұрын
@@charlesturley3545 I found and fixed the issue. What year is your truck?
@eddies.l65932 жыл бұрын
So no other brands break down?
@Half_acre_farmer2 жыл бұрын
Lol
@aaronharper27973 жыл бұрын
I changed the canister the purge valve and the gas cap ask cap and I still can't put gas in my truck. Any suggestions?
@aaronharper27973 жыл бұрын
@@Half_acre_farmer I will, there were dust "rocks" inside of the connector that fed directly back to the overflow line on the filler neck. I think all the lines need blown out. I'll update when I find a solution.
@theunsuccessfultrader56812 жыл бұрын
@@aaronharper2797 updates? Changed my canister and im still hung up as well. Any help is appreciated. Got an inspection next monday. Dont wanna reschedule.
@trevfox88 Жыл бұрын
@@theunsuccessfultrader5681 did you find a solution. same issue here. Replaced canister and still can't fill up without pump shutting off.
@theunsuccessfultrader5681 Жыл бұрын
@@trevfox88 it was the canister. It took a couple fills and it sorted itself out.
@rampyxl6812 Жыл бұрын
you need to change that connector or your gonna have vent problems again
@jerryb12342 жыл бұрын
This guy breaks everything he touches, smh
@1stWulleebullee3 жыл бұрын
So, the environment in your area is Ford's fault.
@lightninsadventures26923 жыл бұрын
This is a pretty common issue on 2011+ gas super duty's