EVAPORATIVE EMISSIONS SMOKE TEST, FAILED LEAK DETECTION PUMP : 2013 TOYOTA COROLLA P043E P2402

[@thingshappen9199]

How can i test everything for a leak and not just the back? By leaving the hose connected to the charcoal canister

[@arnodivalentin5639]

good video nice job... from an old retired auto service tech. I would like to ask you I have a toyota matrix 2010 and I replaced the charcoal canister assy, which includes the vent solenoid and leak det. pump. The codes I had went away but after a few days and filling the car with fuel the cel came on with new codes p043,p043f,p2401,p2402,p2419. the unit I bought was brand new from toyota canada,its cost me $375. 2 years ago. One thing I noticed after changing the part is that when I go to fuel the car the fuel nozzle keeps shuting off after maybe 15 seconds, then I have hold the fuel nozzle on again and it shuts off like its a full tank but it is not! any suggestions, could the vent solenoid be stuck closed? Thank you for any help you can provide. God Bless you.

[@CANADIANINDO]

Hi, thanks for the detailed video and the explanation. I have the same five codes in my 2012 Corolla. In the video, you've noted that you replaced the leak detection pump, but in the video at 9:30 onwards, it looks like that the whole canister assembly was replaced to fix the issue. So is it better to just replace the entire assembly instead of just the pump?

[@silvermoonshine567]

I have the same problems too P043E, P043F, P2401, P2402 It turns out that only a replacement will help?

[@comanchejr921]

Please help, I’m going to do a smoke test on a 2015 Toyoto, can I do a test without closing the evap solenoid. I don’t have a high dollar machine. Can I block off the same way u did. Which hose did u take off?

[@saeedsaleh6784]

Thanks ❤

[@SkillCollectors]

No problem

[@rickyangeles4564]

Hi have a question...my emission everything good execpt my evap is not ready car doesnt throw any codes?can i be leak detection pump?

[@SkillCollectors]

Depending on the vehicle, it can sometimes take weeks for the Evap monitor to go "Ready". If there's no codes then it probably just haven't done all it's tests yet to switch from not ready. For what it's worth, this is why smog stations can issue a "pass" when the evap monitor isn't set yet (but all the others are good to go).

[@rickyangeles4564]

Its a 2010 toyota venza v6 it been like that for awhile..when the fuel tank is a quarter full it waist the gas like in 20miles...scanned it n the evap is the only emission that inc