Everything You Need to Make Farmhouse Wood Signs | Products I Use In My Wood Sign Business

[@cozydiyboutique]

You are such an amazing person, taking the time not only to teach us how to do these projects, but helping us with the materials and tools needed to get the job done. Thank you, your hard work and dedication to your craft, your family and us in KZbin land is inspiring!

[@raeraem3519]

You are just so amazing for trying to help us newbies out in such a selfless way. WE APPRECIATE YOU SO MUCH ❤

[@SimplySallie]

I appreciate you too! 😊

[@ahmednawi8695]

Great video content! Excuse me for chiming in, I would love your initial thoughts. Have you researched - Proutklarton Money plant Plan (search on google)? It is a good exclusive product for learning how to make a massive income by launching your own internet business without the headache. Ive heard some unbelievable things about it and my m8 got excellent results with it.

[@asillem74]

Yes!!!! Well said, Rasha. Thank you so so much for the generous way you share with us.

[@kaceyelliott5574]

I just wanted to say thank you for all of your videos - the time and content you put into them is amazing, and so very much appreciated! I watch a couple videos each day and take copious notes. Hoping to start a business this Spring/Summer. Thank you again!

[@Keahig]

Thank you for sharing! I love watching all of your videos! ❤️

[@dolphinsmilec]

I’ve found that the sample size containers at Lowe’s and Home Depot are great when you don’t need a lot of one color of paint or want to try a new color out

[@haylx0]

Love your videos! I can’t express enough how helpful you are!!

[@SimplySallie]

Thank you so much!

[@crystalh.8575]

Starting a small vinyl business and your videos are so helpful. Thank you for sharing!

[@SimplySallie]

Thank you, wishing you lots of success on your business!

[@crystalh.8575]

Simply Sallie Thank you! ❤️

[@gonzalezmarilyn1056]

Thank you so much for all your advice and videos! Love to watch them all!!!

[@jonifejes6815]

Finally!!!! Thank Thank you for your video

[@lbia5122]

Wow!! You are selfless and you have a good kind sweet heart. You've just shared with the world how to create keepsakes and make some money. Thank you, its motivating!

[@SimplySallie]

Thank you so much!

[@octaviacron7647]

Thank you!!!! I have been looking up stuff online trying to figure out exactly what I need to buy to start making signs. This was by far the most helpful! You just straight out said this is what you need to buy!! Can’t find many videos like this. Thank you!

[@stephanieprice5780]

Thank you Sallie for the video, I have watched all of your videos so far, would love to see more. I started making wood signs a couple of months ago and started off using Luan board, but after watching your videos, I couldn’t wait to use the 1/2” birch plywood. I’m still working on my aim with my brad nailer. Your tip for using the edge of the table, helped a lot. I am working on having my own sign business one day soon, so I really appreciate you taking the time to share your experience & tips with us.

[@SimplySallie]

Thank you so much for this! I love that you're working towards a business, I know you can do it! 💕

[@sasha2904]

This video is everything!! Thank you so much for sharing!

[@USNERDOC]

Awesome! Love your videos and really appreciate you sharing your expertise.

[@sheryl3462]

I am loving your videos! You are so kind in sharing these how to videos to help others that may want to start selling online. I just got a cricut and am no where near ready to sell goods from that but have so many friends and coworkers that want me to start selling other craft items like my wreaths online. My biggest fear of starting that is then having to start figuring out how to claim the money made on annual taxes. Right now anything I have sold has been sold at only the cost of materials. So I really make nothing from them. I have no clue how to go about selling and claiming the sales as an income/business.

[@1kings861]

Looking for something to do to help supplement my current job so we can pay off the mortgage. Thinking about making wood signal. I know the market is saturated but I also think it’s how you market it and the care you take in the presentation that can make all the difference. ❤

[@janicebishop4335]

Your videos are wonderful! You are so talented and you explain everything so well! Super job!

[@sharonhampton3042]

Omg!! I love your videos. I am so happy I found your videos. Thank you

[@SimplySallie]

Thank you so much for watching! Happy to have you here 💕

[@shannonlooper8674]

So helpful…thank you so much!!!

[@164hercules]

You filmed this on my birthday last year. Just subscribed and love your content.🙏🏽

[@melaniesalgado4228]

Thank you so much for sharing these videos! You have given me so much confidence in taking my shop to the next level!! God bless!!!

[@SimplySallie]

No problem, thank you so much for watching! Wishing you lots of success on your shop!

[@kashmirage]

I can tell you are a lovely person. thanks for sharing this info, I really like your videos!

[@geniaginevan6376]

You are absolutely fantastic. I totally love your work.

[@stoots1000]

I have been doing woodwork for years, and can tell you that for the ligt use for these signs (not on a construction job sight)...go with harbor freight tools. You will spend about 1/2 to 1/3...keep your nail gun oiled after each use and it will last for years. Simple to do Tools are like everything...like cars. You can buy a Toyota Camry or a ferrari... the Toyota will get you there just as well...maybe not as flashy, but it absolutely works. When you make money...upgrade to Dewalt or Ryobi Also...the Hart brand at Walmart is excellent for circular saw, sander, drill...

[@christinepeterson6980]

In the early stages of wanting to start a business

[@rosastratton6503]

Thank you so much, this was such good informative video 😊

[@norbertosimioli9289]

Thank you for all your tips !!

[@kathyhollett7038]

This is so amazing!!! So appreciate you sharing your knowledge. The saws scare me so that may have to be later in the game. lol. Thank you again!

[@inescooper8632]

Thank you for sharing, your videos are a great help and inspiration. I am such a baby, afraid to use the power tools, I guess I have to get over that fear quick.

[@SimplySallie]

I am so glad they help! Its totally ok to be nervous, I was too in the beginning but as long as you are aware of your surroundings and wear eye protection and gloves, and learn your machine, you'll be just fine! 😊

[@Sooz3112]

Same here...I'm also nervous having something laying around as my little one is always 'curious'...I'm going to buy my wood already cut - rather than buying a circular saw etc x

[@thepurpledaisy3240]

What type of wood and paint would you suggest for a sign that will be outside in all types of weather? Love your videos and am in your FB group. You have such a gift of explaining and teaching!! Thank you for all that you do to help us!

[@shellychoinski2542]

You are AMAZING! Thankyou❤

[@ginger5778]

Just found your channel and love it!

[@christh3gman]

Thanks so much Sallie, you deserve the best! Where do you buy your Minwax stains, Home Depot does not carry it anymore. I would like you to share how you go about pricing your wood signs & the profit you make.

[@SimplySallie]

Thank you so much! I buy my minwax at lowes. Walmart carries a few colors too! I definitely will make a video like this soon!

[@jananstunes]

Super awesome and informal

[@kellycato253]

Thanks for sharing. Very helpful information.

[@mdcurtis1968]

Love your videos. Here’s a suggestion - cut a rabbet into the back of your frames. Then you can use a $9.00 sheet of plywood instead of a $55 sheet.

[@SimplySallie]

I don't know if I've heard of this. I'll have to check it out! Thanks for the suggestion.

[@mdcurtis1968]

The sheet good you would use is tempered hardboard. Your mailing costs will go down too.

[@SimplySallie]

I have tried tempered hardboard in the past, and had a lot of issues with the stencil ripping paint and the hardboard off. Maybe there's a trick to it that I don't know!

[@mdcurtis1968]

I’m sorry, I didn’t know that. I’ll do some experimenting in the shop to see if there’s something that you can put on the surface before painting. If I come up with a solution I’ll let you know.

[@olga_sauceda]

Another awesome video! Thanks for sharing your ideas. You're such an inspiration 💛. I want to try to make a wooden sign for myself wish me luck! 🤗

[@SimplySallie]

Good luck! 😁

[@dorisbaskfield-heath7580]

Thank you for being so selfless.

[@bmrs.g7108]

Great! Thanks 😊

[@cristiebrady7537]

I am using chalk paint and the stencil vinyl is 1. Pulling up pieces of the paint of my base color and 2. Leaving a sticky residue on the sign. Do you have any suggestions to combat this issue?

[@Ulove_bebe]

Hey Sallie! I just came across your videos today and I’m in love already! I’ve already found a few new products that I plan to buy 😊 I’m new to making signs so I love that you have videos to help us beginners out. Could you possibly do a video on the hanging equipment you use for your wood signs? I’ve been stuck at this point for a while and would love any advice you could give. 👍🏽

[@SimplySallie]

Hi! Thank you SO much! Yes, I definitely will do a video on hanging hardware.

[@doxiedonna]

Hello Sallie, Thank you so much for sharing all the valuable information for making great signs. I am a new subscriber and looking forward to learning more from you! I do have a couple questions that I hope you can answer for me. When you make your frames, do you just attach them to the sign or do you cut a groove in the frame and slide in the plywood? Do you do anything with the corners of the sign, like cut at an angle or do you just butt them up against each other? I was looking at several signs online and it seems like there are lots of options but I'm not sure which is the easiest, cost effective, nicest-looking way----which is why I thought I'd ask you since you've done signs for a long time! One other question for now (I have more questions but don't want to take up too much of your time!!!) About a week ago, Mike and Pam Curtis left a suggestion but I'm wondering what "tempered hardboard" is. Also other than price, how is it different than the plywood you suggested? Thanks again for your great video....I'm looking forward to going back and watching all your other videos! Donna

[@SimplySallie]

Hi! I attach my frames to my sign with a brad nailer, and don't do any angles, just butt them together. I do have a video on how I make my framed signs 😊 Tempered hardboard is a hard material that doesn't do well when wet. Some people make signs with it, but if you will be doing this for a business I wouldn't suggest using it to sell! The look I go for with my frames, I wouldn't be able to do with this type of material because of how thin it is.

[@brandicheng7310]

Thank you for all your videos!!! They are so helpful! Do you use wood filler for any of the knots that you come across on your wood boards? Thanks you!

[@SimplySallie]

Hi! Yes sometimes if they are really grooved. But little and smooth knots, no.

[@Kellybrumbaugh]

I am starting to make signs and use iron ones, have you been successful or have you even tried that way? Just was looking for some tips.

[@bkthompson]

Thanks! Super helpful and informative! I've been having a really hard time with the white paint "yellowing" - or suddenly having little yellow streaks or spots show up. Do you have any suggestions on how to combat that? Thanks so much!

[@michelleedenfield312]

I know you posted this video a while back, but… what thickness plywood do you get that seems to work best?

[@MXbound26]

Do you use Valspar for the black background paint, also? I'm having trouble with my black paint pulling up.

[@ShannonAmber]

This might be a stupid question (I didn’t know these machines existed until this evening) but is there a limit to how long the transfer is. If that makes sense. I’ve seen her making the signs and she makes quite long transfer. I’ve been looking at the cricut, can it be done on that as I’ve only seen people doing small designs?

[@daleparker9801]

New subscriber, love the video. New cricut owner and plan on using it for stencels..thanks. and I also think you may be the most beautiful lady I have ever seen!!! ( Not hitting on you, just stating fact) 😉

[@McCreaFamilyHomestead]

I shouldn’t have asked you on Facebook where you got the stencil vinyl today cause I ended up spending way to much on that site lol

[@vickisenn5330]

If using the auto blade what setting do you use for the stencil vinyl?

[@liwhite484]

Thank you!

[@shannonlooper8674]

Just wondering why you choose to paint with the stencil instead of just burnish the stencil directly onto the wood with your vinyl

[@londoncabbie5511]

Great video. Can you leave a link for the vinyl you use as your vinyl link is for a machine and not the vinyl. Thanks

[@clovel73]

Thankyou for sharing your experience. Please can you specify what is the type of paint you showed in this video is it water based ? Sorry for asking but in my country I won’t find the exact type of paint so Im trying to guess what type of paint you use. Thank-you God bless.

[@SimplySallie]

It is basically regular wall paint like you would get at a home improvement store. Make sure to get a semi-gloss type paint. It is water based. Hope this helps!!

[@clovel73]

Thankyou so much for your reply. Appreciate a lot. Keep up your good work.

[@fionabarnie1144]

Hi do you just use stencils or do you stick lettering directly onto the wood? x

[@garystarnes5178]

Hi Sallie! I am loving your content! I am starting my side business this week. Actually, my Cameo 4 is arriving today. I am curious about the business side of things. Do you use quickbooks or something similar? Also, how do you track inventory? For example, you buy a 1" x 6" x 8' from Lowes. You can make three or four signs from that one piece of lumber. Does your business software convert it for you or do you use another method? I guess the same scenario applies to a roll of vinyl. One roll equals X amount of decals. I just want to make sure I get my taxes correct. I have been watching a lot of KZbin videos and your videos have been the most helpful by far! Thank you for the great content! Gary in east Tennessee.

[@SimplySallie]

Thank you so much! I plan on doing a video on inventory/tax stuff very soon 😊 good luck with your new machine! I know you'll love it.

[@garystarnes5178]

@@SimplySallie That sounds great! Thank you!

[@mayempoi]

CAN I USE POLICRILIC OVER VINYL AFTER PLACE IT ON THE WOOD PIECE, TO GIVE A BETTER FINISH ?

[@matchstickdesignco]

FYI, you can get FRAGILE labels from usps.com for free, shipped right to your mailbox. They come in rolls of 250.

[@SimplySallie]

Wow I didn't know this! I get all of my boxes for free but didn't know they had the labels too. Thanks for the tip!

[@sherrybradshaw6504]

Im just starting an etsy shop. Id like to make wood signs and accent pillows and some holiday decor items. Everyone says all my items should sort of be the same. Like all pillows, etc. What do you think?

[@SimplySallie]

I think since they are all within the "home decor" theme it will be perfectly fine! I offer lots of different items. I think the only reason you'd want to do different shops was if you offered TOTALLY different things(like soap and costumes). Hope this helps!

[@sherrybradshaw6504]

@@SimplySallie thank you, very much.

[@cassandrataylor7536]

Thank you Sallie. I am currently in the process of starting a wood sign business. I was wondering what is the thickness of the plywood you use?

[@SimplySallie]

1/2 inch birch 😊

[@cassandrataylor7536]

Simply Sallie Thank you! 😀

[@Silent-G]

Can you do a video on how to fix letters that bleed on a sign?

[@kathystanley9996]

what thickness wood do you use on your framed signs?

[@ashtongarner5940]

Love your videos!! What kind of black paint do you use for the letters?

[@SimplySallie]

Thank you! Right now I am using krylon colormaxx in flat black. I have been trying different things out but I like this one right now!

[@spoogiezz]

Do you have issues cutting straight with a circular saw? My neighbor has a table saw but I don't want to take advantage of him so was looking into getting a circular saw to cut plywood myself.

[@SimplySallie]

My husband usually cuts for me with the circular saw, but he said its not too hard. I will measure and draw lines on what to cut and we just cut it this way 😊 it's definitely doable just be very careful.

[@JennaMcCallister]

You can also get a ripping fence! I got mine on Amazon and it is just a straight edge that clamps onto the wood

[@acadiaduncan1108]

Hi Sallie! You use the polycrylic to seal your stencil before you paint it?

[@SimplySallie]

Hi! Yes I do on my stained wood. Painted signs i go over the stencil with paint 😊

[@AliJaeJR]

I'm not seeing the link to video of how you wrap you big wood signs?

[@marymoore1712]

So why do you need a miter saw and a circular saw? Can't one of them do the same job?

[@meredithlittle8981]

Could you just wood glue the frame on?

[@SimplySallie]

I guess you could, I just like the durability of framing it on!