Everything you need to turbo your Volkswagen 2.0 ABA 8v (cost and parts list)

#volkswagen #vw #vwrabbit #turbo #carsofyoutube #vwgti #mk1
To help out with the build and to get in contact my email is [e-mail]
My PayPal: www.paypal.me/MichaelRoyce
Thanks for everything
Head spacer www.urotuning.com/products/he...
Injectors www.urotuning.com/products/fu...
Walbro GSL392-400-939 Inline Fuel Pump 255LPH HIGH PRESSURE (Universal External Pump) a.co/d/6P3m9SO
Maf housing www.ebay.com/itm/331549200335...
Turbo kit www.ebay.com/itm/373704394916...
Arp head studs www.urotuning.com/products/ar...
Timing belt kit www.fcpeuro.com/products/vw-t...
Turbo chip reflecttuning.square.site/

[@ryanblase5322]

The two forms that he is talking about with the motor is a odb1 motor is a 2.0 crossflow and that has full forge internals and the head has duel oil inlets in the head I just built one for my 96 vw passat I'm an old school vw head

[@vr6prodigy]

Cool video buddy. Love an ABA.

[@natekoz5020]

Appreciate the content man!

[@GCSEURO1982]

Of course

[@changeling3461]

Let's see the dyno numbers!

[@JamesKelly89]

I have an MK3 Cabrio. I'd like it to have more HP, so I'm considering turbo charging it. The alternative is fitting a VR6 into it, but that means chopping stuff up.

[@WagonerVT]

Thing would be a fucking rocket with a cammed vr6 with a tune

[@ryanblase5322]

You can actually use a mk4 head gasket for boost it will do the same thing and a lot cheaper

[@Victorsvolkswagens]

Techtonics has a 3.5mm thick head gasket that drops the compression to 8.5:1 for $50

[@Hippie9D]

How have those pistons held up for you? I'm working on a cis 8v motor with an ABA block. The rest of it's forged but the pistons are cast. Only looking for 6psi or so

[@GCSEURO1982]

I have already gone through a set of pistons. The original ones had shattered where the piston rings go and so when I replaced them I gapped the piston rings for boost

[@user-iv7rs6dw1d]

You think I could do this to my mk6 Jetta has a 2.0l 8v only problem I would see that I would run to is the MAF sensor what do you guys think?

[@GCSEURO1982]

I’m sure it’s possible but you would need to make sure you can find a tuner or a company that makes a tune

[@sarkoziandrei2286]

mine golf 3 cabrio is 2.0 8v gti motor code 2E can i make with turbo up your video ?

[@GCSEURO1982]

you can do the same build because it's the same motor so it would work just the same.

[@urielgomez6256]

I have an Mk3 golf 1995 GL what kinda of motor that is when serial number says it’s a 2.8

[@GCSEURO1982]

That’s a vr6

[@sniperpaintcorrection6790]

What’s the difference between 8v and 16v? Is the 8v a must for the mk3? I have a 95 cabrio

[@GCSEURO1982]

The 8v is a single cam 8 valve and came in the mk3 Volkswagens. The 16v is a dual cam so a lot of people just take the 16v head and install it on the 8v block to make more power. I stick with the 8 valve because it’s easier to work on.

[@smily1608]

Howsit bud. Any drive by videos or Dyno?

[@GCSEURO1982]

kzbin.info/www/bejne/jmTUeal3fbGgmbcsi=OfRj-0GD2nXSKcjn

[@headshakerbeatz9350]

would these parts apply to my mk6 jetta s 2.0l

[@GCSEURO1982]

I couldn’t tell you for sure if they are the same. Im pretty sure they are different though

[@oscarnienhouse3930]

Is the chip plug and play or is tuning involved??

[@GCSEURO1982]

No tuning required it’s a already tuned chip

[@sauloguerrero6017]

U know how rare is a gti mk3 2.0 8valve auto never see one and i see one for sale

[@GCSEURO1982]

I don’t think I’ve ever seen one

[@xXAGENTcarlosXx]

Are u still running the cable clutch ?

[@GCSEURO1982]

Yes

[@GCSEURO1982]

It’s the 020 transmission that still uses a cable

[@xXAGENTcarlosXx]

You are a legend 🙌🏽

[@maxnoeker3753]

What manifold do i use for mk1

[@GCSEURO1982]

I just bought the cheapest one I could find on eBay

[@GCSEURO1982]

www.ebay.com/itm/234581343344?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=2a37clFFR66&sssrc=4429486&ssuid=JKuC6XU3Q8O&var=&widget_ver=artemis&media=COPY

[@sarkoziandrei2286]

how hp have you now and feel de diference ?

[@GCSEURO1982]

I’m not sure how much hp I have now but there is a huge difference in power. It’s super fast

[@sarkoziandrei2286]

thanks

[@sarkoziandrei2286]

i have to choise to put a vr6 or to make my motor with turbo

[@GCSEURO1982]

@@sarkoziandrei2286 just depends on how far you want to go. The vr6 is going to make more hp with a turbo

[@sarkoziandrei2286]

i put a vr 6 just for it îs bigger motor sound and maybe în one day a turbo