Evinrude 9.9 HP Carrier Bearing & Seals Replacement

Product links below:
👇 2 stroke mixing bottle 👇
Canada: 🇨🇦
amzn.to/48ODgL0
USA: 🇺🇸
amzn.to/3tyjm6T
👇 Hydrofoil 👇
Canada: 🇨🇦
amzn.to/45wdcSb
USA: 🇺🇸
amzn.to/45qLkyB
👇 Marine safety kit 👇
Canada: 🇨🇦
amzn.to/3rM1zZt
USA: 🇺🇸
amzn.to/3QcOSjJ
👇 Bad ass boating sunglasses 👇
Canada: 🇨🇦
amzn.to/45z3GNY
USA: 🇺🇸
amzn.to/4768dc7
Bansheeboat participates in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn by linking to Amazon.ca, Amazon.com affiliated sites. Links included in this description might be affiliate links. If you purchase a product or service with the links that we provide we may receive a small commission. There is no additional charge to you! Thank you for supporting Bansheeboat.
Today we are replacing the carrier bearing on an Evinrude 9.9 Hp outboard motor. This procedure is the same on many different types of outboards mostly the smaller Johnson and Evinrude models. 5- 30 hp.
Below is a great website to get parts for Evinrude and Johnson motors. This parts place is out of Colordado and easily shipped to Canada, even easier shipping if you are located in the states.
www.crowleymar...
Make sure to subscribe to the channel for more great boating actions!

[@GO_OutDoors]

Glad you made this video cause I am going to be replacing the seal in mine. You forgot to show how to add new fluid.

[@scotts653]

All of that oil on the outside of the carrier is 2-stoke oil from the exhaust tube. If you take the prop off and shine a flashlight you will see the bottom of the exhaust tube. If you are getting water in the LU oil, it's most likely the shift shaft o-ring.

[@coastalcleaningandmaintena2884]

Your links are gone. Qhere can i get one and what uear was yours?

[@MrHabitat009]

Great video guys! So if I have moment in my prop would this be the fix you think? Thanks

[@jimpocalypse1]

At 53 seconds you have pictured the other end with weep hole leaking. Where did that oil come from? there is no seal on that end.

[@paulajuck5993]

Wow very interesting....you made it seem easy..great job!!!!

[@Rlip]

Sometimes the shaft and the bearing carrier won’t come out easily so heat the outside of the case up and make a jig to help pull it out

[@donferguson2495]

Save the old carrier , the location of the Crack was on the water side that doesn't seal anything

[@hellopeople6160]

Awesome 😎

[@robward9475]

No link?

[@Bansheeboat]

Sorry Rob the place is www.crowleymarine.com

[@robward9475]

@@Bansheeboat sweet, thank you!!!

[@BasVossen]

I hoped you had found a way to take out the old bearing and just replace the bearing instead of investing over $100!

[@Bansheeboat]

Our bearing carrier had a crack in it so we wanted that replaced as well.