This is my favourite video on the channel, because ya think you're gonna just learn a bit of wheel swappage because you just got your new setup and boom! By the end you know how to tweak and tune both setups the whole bloody way! Belt tension? Sorted. Washer and bearing positions? Ya done. That little trick about getting the bearings out on the truck? Show your dad that one, and he's gonna be bloody proud. His son can finally operate a tool that isn't an IKEA hex. Maybe he's not a complete waste. This video reunited me with my father.
@R.u.x.x4 жыл бұрын
Great video! Only thing missing that would be very helpful is an explanation of the kind of belt tension you applied.
@Carlito333x27 жыл бұрын
I love this video because it helped the couple of first times swapping the wheels. Video tutorials are so much more easier to use than reading manuals. I have a carbon gt and love it. I would not ride any other board because it is the only real option on the market that is powerful and has the all terrain wheels as well as the street wheels. I am looking forward to see how Evolves boards will....,well,...evolve.
@xrayturner7 жыл бұрын
Hello Evolve. I do love the board and I like your videos as well. I am having a hard time finding the wheel setting selection when switching between wheel sizes. I know where it is on the remote but is there a chart you can point me to for mm and teeth? Maybe you can add to the end of the video as well and then this video would have everything needed for wheel change and setup. Thanks.
@bash71127 жыл бұрын
Great guide. You mention if one wheel stops before the other to adjust the tension. It would be good to mention how to balance and adjust.
@fazer127796 жыл бұрын
Don’t you then need to then calibrate the controller display for the new size diameter wheel? (eg: 80mm - 97mm wheel)
@emtbridesnetherlands42657 жыл бұрын
Little question guys Whas looking at the video great guide btw 👍🏻 One thing i saw the the rotating directions on the rear tires where opostite to the front With way should i put them on originaly ??
@vanlitespeed93257 жыл бұрын
How about balancing the wheels from factory for the price commanded evolve. If you dont balance the all terrain wheels a smooth surface feels like ur offroading and seriously compromises handling.
@NJ-lc4kr3 жыл бұрын
Nice! Is this also available for bamboo 1st edition?
@tomalley35857 жыл бұрын
I really like the look of these, plan on buying the bamboo gt 2 in 1 in November for my birthday, how big are those motors though? are they 5055 or 6374?
@asseenfromabove22887 жыл бұрын
good video , question : i have a GTX and just put my all terrain wheels on, ho do i know if i put the belt on to tight? whats the air pressure supposed to be at? i only have it at 40psi because i don't wanna pop em. the wheels don't stop at the same time like u said but they stop about the same as yours do in the video. and last what setting do i change the wheel size too on the controller?
@nickymunden7 жыл бұрын
Hi could you tell my why you put the wheel back on before tightening the motor thanks
@andrewfreeman886 жыл бұрын
You don't need to do that, not sure why he did, but not happy about their LACK of communication on YT.
@socomon696 жыл бұрын
Was just doing this and was wondering the same. Seems like the drive gear is all you need to set the bent tension. I don't see where adding the wheel changes anything.
@Nandox75 жыл бұрын
Probably to make sure all is well aligned. Without the wheel the pulley would tilt and belt tension wouldn't be right.
@nickymunden7 жыл бұрын
Do I need to grease the drive gear bearing as well ? And if needed how would I get it out to replace it if needed
@huhsaywhat7 жыл бұрын
Nicky Munden I was wondering the same.
@andrewfreeman886 жыл бұрын
It's mostly the front wheels that make the noise, I wouldn't put it on the drive gear as you don't want that part loose.
@simonharrison76793 жыл бұрын
Hi, I've recently purchased gtr carbon 2 in1, the at was already set up but when I came to switch to street I couldn't find any silver washers?? Has the Latest ones had silverwasher modded out? Does it matter its not used? Have swapped over many times without the silver washer and no issue. Also has the bearing spacer also been modded out as I don't have that either and noticed the ceramic bearings have some kind of spacer already attached no?
@Darksagan4 жыл бұрын
Excellent tutorial!!
@buystuff98046 жыл бұрын
Very good ......but I find it a-lot easier and faster if you tighten the screws as you adjust the motor and tighten belt at the same. And you don’t need to have the wheels on the gear when adjusting and tightening.......just put on the wheels after you’ve tightened everything first.
@evolveSkateboards6 жыл бұрын
Thanks for your comment! There are a few different ways to do it, we're glad you've found a way that suits you :)
@ozpain16 жыл бұрын
is there a conversion kit for the 107's that comes with everything you need like this AT kit? The AT kit costs $200 for everything (I think), but you have to buy the 107 wheels at $159.99 and a gear plus belt kit (that's currently sold out in the US) for $94.99. A total of $254.98 before shipping.
@BigSheed927 жыл бұрын
Do you guys have store pick up in the states?
@sneipen777 жыл бұрын
Thanks for all the "How to videos" :) Can you please make one on changing Grip on the Carbon GT. Also how to put on a new grip sheet please.
@evolveSkateboards7 жыл бұрын
Hi Kenneth. Thanks for the suggestion. We will look at adding it to the list. We are hoping to regularly bring out new 'How To' content.
@dylanw5287 жыл бұрын
a how to clean bearings would be great
@enjoyesk89785 жыл бұрын
How about a small hole in the drive gear that could allow you to tighten the 4th motor mount bolt without removing the gear?
@ChapperzTV7 жыл бұрын
Useful video, thanks guys!
@Type_ant5 жыл бұрын
Works on boosted. Tried it.
@harperstephens38365 жыл бұрын
Hey I just bought the AT conversion kit those silver spacers aren’t in those capsules I’m confused on what to do??
@evolveSkateboards5 жыл бұрын
Hi Harper, please get in touch with your local Evolve and we will be able to help you out :)
@MikevomMars5 жыл бұрын
2:16 - Is there any chance to REMOVE these bearings again after lots of rides? What's the best technique to do so? Mine are totally stucked, can't remove them again for cleaning 😳
@evolveSkateboards5 жыл бұрын
Hi Mike, yes it's possible but I don't believe we have a video on it. You're more than welcome to email us this question and we can talk you through it :) - ask@evolveskateboards.com.au
@edwardduran36587 жыл бұрын
Do you have to re program the remote to compensate for larger gears and wheels
@vikgudhe4617 жыл бұрын
Edward Duran No it's in the drums menu. When you double tap the left button.
@joshdimovski44834 жыл бұрын
When installing the front wheels does it need a big silver ring on it like the back wheels ?
@jasip10003 жыл бұрын
No
@HORRUS298 жыл бұрын
Can you also do a video to convert the gt carbon AT to the street?
@evolveSkateboards8 жыл бұрын
Just uploaded
@HORRUS298 жыл бұрын
Evolve Skateboards you guys are amazing!
@Surr0n_lbx10 ай бұрын
And the screw at the Motor side?
@maggiswelt8298 жыл бұрын
Nice Vid!
@craigweston58876 жыл бұрын
are there any videos of the Gen2 street to all terrain conversion?
@evolveSkateboards6 жыл бұрын
Hi CJ, here is a Gen2 AT > Street. vimeo.com/74278024
@markcauser1743 Жыл бұрын
What's size the spacer please?
@fabiannaibaf41317 жыл бұрын
hey one of the screws to losen up the moter to be able to adjust the belt wont move itself (seems like its borken), has someone any idea what I can do
@DiscipleOfSaya7 жыл бұрын
Thanks for the vid! Installed mine without a hitch :>
@matthewternouth44975 жыл бұрын
Anybody know what size the silver washer is?
@robert26856 жыл бұрын
Whats the Name of this Song at the end of this Video ?
@acidkhmer4 жыл бұрын
Seems dangerous to put lube in the wheels bearings slots???
@evolveSkateboards4 жыл бұрын
Not at all.
@loopiewho7 жыл бұрын
WHAT IS THE CORRECT PSI FOR THE all terain wheels please
@raymonddowling55536 жыл бұрын
50psi
@adanyz6 жыл бұрын
On the remote what do I set the wheels as?? Anybody
@vongdong105 жыл бұрын
Why don't you guys make smaller drive gears for the AT wheels??? I want comfort and range. Don't need all that torque for riding around the streets.
@evolveSkateboards5 жыл бұрын
Great news! We've made 47t gears that are compatible with the GT/GTR series. Jump on your local Evolve's website for details and purchasing!
@eduarmirandaaudiveth81497 жыл бұрын
Puedes ayudarme a adquirirlo o comprarlo con el envio a colombia
@usmcmsgt54875 жыл бұрын
Wish you guys used ft-pounds in relation to "tighten" down but not to much...🤔
@sonzhumin4 жыл бұрын
where can i get those washer?loose some of mine
@orcusdei3 жыл бұрын
You probably figured out, but any skate shop, ask for speed rings, or hardware store :-)
@eduarmirandaaudiveth81497 жыл бұрын
Quero un kit de rodamiento para una skate boart
@EverlastingEclipses7 жыл бұрын
Only the problem with my 97mm wheel is that even if something is wrong I can't take my wheels off,the back wheels (I have bamboo gt 97mm wheel st setup) whenever I try to take my back wheel off It's like its hot glued to the belt gear or something it won't come off the axel or axis whatever we call it... so I'm really pissed the fact that I have no allen wrench and the fact that I tried telling evolve that I wanna send in for repair the motor has been making hissing scratching noise and I have no idea why and even If I did I have no way to know because the wheel won't come off the god damn axis ...I've been telling Brandon and Adam from Evolve for like 2 months now I believe that my board has been making weird noise and all they do is linking me back to one of these how to series which I probably have seen like uhmm. 2 dozen times already !God.... I love evolve and it is my favorite board but come on.... you can do better customer service than that ? I mean Boosted might suck in range and power and everything... but they do actually have decent customer service I don't know if they are good but they are good if they are accepting people's complain and actually asking customers to send their board in free and fixing their boards ... I don't know...I feel like I'm left out from Evolve :/ I love evolve please... help me
@frederickontour14787 жыл бұрын
Evolve Germany has really good customer service!
@TonyStackzz4 жыл бұрын
i took my belt off and now i cant get it back on
@daviddelatorreperez45 жыл бұрын
Es como armar Legos
@jlking28273 жыл бұрын
UPDATE your videos! Where is the instruction for installing the new 6 inch wheel conversion from 7 inch. The pieces are different than any of your videos.
@CroshVine3 жыл бұрын
Im really annoyed right now. The stock bolts are so stripped from the start that I literally can't tighten the belt and finish this conversion. Either you use such cheap material that it strips with one use, or your builders dont care what happens to us when the board leaves the shop.
@evolveSkateboards3 жыл бұрын
Hi, which bolts have rounded? If the board has been together a long while and they are tight it would be best to add some WD40 or similar.