I haven't tried tumblers on my F1 yet, nor have I tried full wrap. You showing how easy it is makes me want to do one now. Thanks for all your great videos. I love that you try things new on camera and sometimes have issues (just like all of us).
@KimandGarrettmakeit3 ай бұрын
It's all about embracing the challenges and learning from them. I mean, what better way to learn? We'll conquer those tumblers together!
@ViporsEdg3Ай бұрын
I've done sublimation tumblers and just bought the F1. I'm excited to start working on tumblers with the F1. I have the chuck and just want to do as much research before I do my first tumbler.
@GMN_Laser_WoodCrafts2 күн бұрын
Im always looking for good tips on tumblers!! Great job!! Ill be trying Canva and creating a wrap!
@georgeheleine52093 ай бұрын
Great video! I just received my F1 Ultra and haven't done a tumbler yet, I have done some on my F1 and used the method of running the blue laser on the first pass then the IR on the second and using the chuck and no issues with it not running the same area on the second pass.
@melodyboomhower99913 ай бұрын
Very informative and 😎 I have worked with resin however after watching y'all's videos I'm looking at lasers 🎉 thank you for sharing your knowledge and love for engraving❤ ❤❤
@KimandGarrettmakeit3 ай бұрын
I'm glad you found the videos informative! It's always exciting to explore new techniques like laser engraving.
@according2dave3 ай бұрын
Just started trying these on my F1 and the P2. Used the roller once and the chuck twice so far. The roller worked well on a non tapered tumbler, but I think I prefer the chuck as well. Thanks for the videos!
@MarieKeen-k7z3 ай бұрын
Thanks for sharing. I do a lot of tumblers with the rotary but have not done a full wrap yet. My issue with the RA2 is, once I took the rollers off and put the chuck attachment, it was such a pain to do, I never took chuck attachment off again. I wish it were easier to swap between the 2. If you found an easy way to swap back and forth, I'd love to see that.
@KimandGarrettmakeit3 ай бұрын
Same. I think we are gonna leave the chuck on too.
@ktbg12 ай бұрын
I loved this video and learned so much! I just got the XTool F1 and haven't even unboxed it yet. I got the rotary attachment with it as well as the slide extension and air purifier. I can't wait. Will I be able to create this look on the F1? Thanks so much. You two are awesome.
@KimandGarrettmakeit2 ай бұрын
Oh yeah! Totally! Use the chuck, it's way easier. Go unbox it!!!!
@ricknwater27593 ай бұрын
Just got my first xtool and have done lots of wooden projects but have not done any Rotary tool projects. Looking forward to doing some. I watch all your vids and learn lots from them. Thanks so much
@jennifer727653 ай бұрын
I keep going back and forth between the F1 and the ultra. This video helps. Keep up the good work.
@dbellesouth583 ай бұрын
I made my first tumbler on my P2 last month. These could be addictive!!!! Thanks for sharing your video!
@KimandGarrettmakeit3 ай бұрын
Once you start tumbling, there's no turning back! 😎
@laurelremund47503 ай бұрын
I love the things you do. I've learned so much about the tools I have from watching your videos. The Ultra will be on my doorstep this afternoon. I'm sooooo excited and tonight...we laser
@edqueen73453 ай бұрын
My wife and I just set up our xtool P2 and just started exploring and learning how to use it. We've been experimenting with wood so we haven't even explored the use of the rotary tool yet.
@RNMEDIC13353 ай бұрын
I laser engrave with the P2 using the chuck on there. I purchased a 3D made screw on from Etsy. I would love to try on F1 now but chicken too until I saw your video today. Thanks for all you do. I appreciate your expertise & humor.
@JennB773 ай бұрын
I haven’t tried tumblers yet because I was seeing so many people have issues with doing a full wrap! Definitely looking forward to next week’s video to see how you design it!!
@ritallu3 ай бұрын
I haven’t tried out my RA Pro yet. Looking forward to getting some tumblers to test. Thanks for showing us how it’s done!
@blaketolleson89873 ай бұрын
Nice job!! Just started with the F1 ultra. I’m new to engraving and have yet to do my first tumbler, but can’t wait. I will be using the chuck system.
@paulsteiger82943 ай бұрын
I use my F1 and the chuck. Very cool things we did and I was able to figure out how to make the engraving color to be Black!! So so cool.....Thanks K & G!!
@kellimonnheimer75043 ай бұрын
I only have a Cricut right now. Watching you guys to determine what laser to get.
@KimandGarrettmakeit3 ай бұрын
Choosing a laser is like choosing a wand in Harry Potter - it has to feel just right!
@jannavanderhoof46173 ай бұрын
I've only done one full wrap but did do 16 32 oz front and back engravings. I also do epoxy and sublimation cups. Love your videos!
@jat9193 ай бұрын
Love the tutorial! I don't have a laser engraver yet, but hope to get one soon for the right price. I have been buying supplies, though 😊 I am very interested in using the rotary attachment. Love you guys ❤❤
@KimandGarrettmakeit3 ай бұрын
Looks like you're all geared up for some serious engraving action! Hope you get that laser engraver soon and start creating some masterpieces.
@UnitTx19533 ай бұрын
Nice very nice. Glad I found your youtube channel . Now I want to try doing a full warp tumbler.....
@tracimcrae84873 ай бұрын
YES!! Right now I use resin on my tumblers, but I just received my rotary tool, can't wait to try engraving.
@Jgraytn3 ай бұрын
I love your Demo’s. I am deciding on an x tool machine, and your projects really spark my imagination and help me decide which options I will need.
@brendaduncan90933 ай бұрын
Hey Guys, I love watching you guys, I sublimate my tumblers (very easy) I recently purchased the WeCreat and have lasered a few( also pretty straightforward) My next adventure is the XTool M1 ultra... Really excited and hope to see videos from you on it as well. Thank you for all you do to help fellow crafters. God bless
@KimandGarrettmakeit3 ай бұрын
Aw! Thanks! That's awesome to hear! I'm glad you're enjoying the content and finding the tutorials helpful. Can't wait to see what you create with the XTool M1 ultra!
@ryanweller62423 ай бұрын
Love using the Rotary! Bought the accessory kit as well. Comes with locators and laser for center.
@paulastanifer99403 ай бұрын
I have the rotary to tool but haven't tried it yet with my P2. Thanks for the encouragement.
@CreatorCreatedCreate3 ай бұрын
We're just doing sublimation and sometimes resin. Want and need to do engraving. We have all we need. Just need to do it. Great video! 🎉
@KimandGarrettmakeit3 ай бұрын
That's awesome to hear! Engraving can add a whole new dimension to your creations.😎
@aimerjo2243 ай бұрын
I’ve been too scared to try tumblers. They seem so overwhelming. This is the series I needed!! Thank you!
@KimandGarrettmakeit3 ай бұрын
Don't worry, tumblers are just cups with an attitude! You got this!
@karenhadden49803 ай бұрын
We have the rotary with our F1 but haven’t had a chance to play with it yet. That fiber looks cool! Love the larger size!
@minx1433 ай бұрын
I've only used my s1 for tumblers so far. Got the ultra and need to reorganize the craft room for better efficiency and multiple laser use! Tip you can out the chuck jaws IN the tumbler I found that holds much better!!! (for me at least)
@chantalhebert57683 ай бұрын
Love It!!! Just tried on rotary on my F1 this week for the first time. Can't wait to try a full wrap tumbler.
@KimandGarrettmakeit3 ай бұрын
That's awesome! Trying out the rotary must have been exciting. Can't wait to see your full wrap tumbler creation!😀
@kevinrich46373 ай бұрын
Nice demo. My Ultra comes Tuesday. I wish I could use my rotary from D1 one. Lol thank you for the information.
@steveray52883 ай бұрын
Thanks for all your videos. Very informative. I like using the chuck rather than the rollers.
@KimandGarrettmakeit3 ай бұрын
Chuck vs. Rollers - the ultimate showdown!🏆
@gvilledh3 ай бұрын
I am so glad to see you do this. I have a large laser with a rotary and have not even wanted to try it. Looking forward to your next video on designing a tumbler. Love your videos!
@KimandGarrettmakeit3 ай бұрын
Looks like it's time to dust off that rotary and give it a spin! Stay tuned for some tumbler magic.🔮✨
@gvilledh3 ай бұрын
@@KimandGarrettmakeit Thanks to your video, and my enabler friend, Karen, I have the F1 Ultra deluxe package sitting my cart on the xtool site. We have an 80 watt OmTech, but this will be fun for the things it can’t do.
@margohenderson28773 ай бұрын
Love your videos. I'm doing full wrap and adding a name somewhere in the design. I'm looking forward to seeing how you make your full wrap designs.
@AudraBrownCBGB3 ай бұрын
I love watching everything you do. I’ve learned a lot from watching you.. Thanks for all you do..
@candlepopstu3 ай бұрын
Full wrap tumblers are the best! Love my xTool S1 and F1 Ultra! Thanks for doing this informative videos! Love you guys!
@craftingwithjean55993 ай бұрын
I’ve only engraved rings using the rotary. Will now have to set up to engrave tumblers. Thanks!
@KimandGarrettmakeit3 ай бұрын
OOO!!! Kim want to try rings so bad! Can you show us what you made? Post them on the Kim and Garrett Make It Group!
@gvilledh3 ай бұрын
@@KimandGarrettmakeit I hope Kim tries them, since I am purchasing the F1 Ultra and want to do them, too.
@robertbarnhill-zx4nb3 ай бұрын
I’ve just done single designs. Haven’t tried a full wrap one yet. Not sure how to set it up. But I’ll be watching for your video on how to set one up. Thxs for your videos
@michaelwhitley20493 ай бұрын
Great job. Can’t wait to see the jewelry attachment and what other ideas ya’ll come up with using the rotary.
@judybellwilburn9843 ай бұрын
I use WeCreat and Epoxy... I do it all my friends. By the way I love that you two share your knowledge with us!!
@ss220astro3 ай бұрын
Love the tumblers. Just got my F1 ultra and anxious to try my hand!
@bearparts3 ай бұрын
I can't wait to start making items like this. I'm new to lasering, so everything is new for me. Great job. Good info as well!
@96Birch3 ай бұрын
Thanks so much for all you do. Your videos are so informative and I've learned so much! Can't wait til we can add a Fiber to our shop!
@KimandGarrettmakeit3 ай бұрын
I'm glad you find the videos helpful! Adding a Fiber to your shop sounds exciting!
@AlaB199033 ай бұрын
Im just in the trial process kinda afraid to do a full wrap cuz them tumblers are expensive to waste😂But I may try them again since u made them look so easy❤.Love ur videos and always so easy to follow😊
@stacy15603 ай бұрын
I bought the rotary tool but have not used it yet! I can’t wait to try it.
@shannonpaschall47353 ай бұрын
I have a rotary but haven’t used it yet!! This makes me want to go to the shop & try!!
@KimandGarrettmakeit3 ай бұрын
Go for it! The shop is calling your name!!!🗣
@scotthamel79283 ай бұрын
I love doing these. So fun to watch come to life.
@KimandGarrettmakeit3 ай бұрын
It almost like magic🔮✨
@UTINNIDESIGNS3 ай бұрын
Looking forward to doing full wraps and tumblers in general when my Ultra arrives next week! Great video!
@arbee113 ай бұрын
Just unboxed my F1 Ultra and filter system! I'm (almost) too scared to plug it in, what if I screw something up? :) I am no expert, just a beginner and it just looks like fun.. I'm old and bored! Thanks for posting this tumbler vid, those are on my learning list! You should do a vid on where to find those files for wrapping! Other than KZbin, I know not where to start.😉
@vanessahernandez47573 ай бұрын
Love what you guys do! Very informative wishing you much more success
@Steve-r8i3 ай бұрын
enjoyed the video, I use my RA2 chuck with my Xtool D1 when making tumblers
@riarue45693 ай бұрын
I love the way you are together! I sublimate my tumblers, I haven't tried engraving yet, maybe some day.
@contrysidecrafts65153 ай бұрын
Mind blown, we just got the X tool D1 pro and the tumbler attachment, haven't used yet, but would love the tumblers, guys.
@katrinaflorea16793 ай бұрын
I use a diode laser. I just added an inexpensive co2 laser that I haven’t tried with the rotary axis yet. I am excited to learn how to make a full wrap design next week!
@jenniferwoodall37183 ай бұрын
Have done sublimation and resin just getting started with doing tumblers with p2 and f1
@KimandGarrettmakeit3 ай бұрын
Nice! Tumblers are a cool project to try out. Keep us updated on how it goes!😁
@eduardopico57273 ай бұрын
Great video, you guys make it look so easy.
@FredSchmitthammer3 ай бұрын
We are doing ours with a chuck. The chuck makes it easier to change tumblers of different sizes.
@kindle57963 ай бұрын
I am still using a glowforge, and I wish it had the options of the xTool. After watching everything the F1 can do it will be my next investment because I really want to do tumblers.
@KimandGarrettmakeit3 ай бұрын
Glowforge might be feeling a bit jealous now that you've set your eyes on the xTool F1! The F1 is great because it's versatile and inexpensive.
@mcmillanfarms2 ай бұрын
Haven't tried a tumbler yet but have the rotary and need to try one.
@white-kw3rq3 ай бұрын
I use the chuck on my d1 pro. Love military themes and working on full wraps now!
@richardurwin12483 ай бұрын
Waiting for the F1 ultra to arrive next week. I have used the rotary tool with the chuck seems to work better for me. Try some full wraps soon! I have just did it on my D1 pro have to try on the P2 as well
@ValYo06233 ай бұрын
Thanks for the video! Do you have the M1 Ultra? I just got my M1 Ultra and rotary tool! Excited to learn!
@ktmcmo3 ай бұрын
Can't wait to try them out
@alanm71863 ай бұрын
I always learn new techniques from your videos! Keep up the good work!!
@KimandGarrettmakeit3 ай бұрын
Thank you so much for your kind words! I'm glad you find the videos helpful.
@lorihall36153 ай бұрын
Thanks for sharing. Inspriation to try the xtool tumbler attachment I bought. Thank you.
@dusticdustmakerdesigns3 ай бұрын
I use my p2 and they have turned out great most of the time
@jennifercastillo39283 ай бұрын
I have a Xtool F1 and have used the rotary chuck twice on tumblers. They were not full wraps. I’m looking forward to your video next week on how to design full wraps!
@rachaelklenk99043 ай бұрын
I did tumblers for my team at Circle K.
@KimandGarrettmakeit3 ай бұрын
That's awesome! I'm sure they loved it.
@shellyjorgensen24413 ай бұрын
I love doing tumblers on my F1
@KimandGarrettmakeit3 ай бұрын
That's awesome! Tumblers are so easy to do on the F1s.
@jrogers10133 ай бұрын
I do tumblers with resin but one of my grandsons wants a laser to start an online business...so Memaw will be learning how to laser!! LOL
@fazerpileit13 ай бұрын
Hey i enjoy your videos. I have a 32oz powder coated water jug covered in backwards and failed engravings. I have a roller and a rotary chuck. The thing has dents in it from being dropped multiple times. That makes problems for the roller and it's too long for the rotary jaws to hold. I even 3d printed a longer set of arms but they seem to need to be angled in so they didn't work either. I finally did my first 3 successful logo engravings on 20 oz tumblers for an event for our RC club which I donated. They bought 20 more for me to do for the next event. Having some extra tumblers to hone my skills would be awesome!
@GloryAboveDesign3 ай бұрын
Love this wrap! Can’t wait to try the roller on my laser. 🎉❤
@habieber83153 ай бұрын
I haven't engraved a tumbler (YET). I an waiting for RA2 cable for the F1 ultra to be delivered. But I have laser engraved a couple metal flasks. Can't wait to see your Military ones.
@dnesebarber64413 ай бұрын
I am sublimating my Tumblers but the engraving looks AWESOME 🤩
@KimandGarrettmakeit3 ай бұрын
That's fantastic to hear! Sublimation can produce some amazing results on tumblers.👍
@nahnisjourney14063 ай бұрын
WOW!!! Not bad on the time! VERY NICE!!!!!
@KimandGarrettmakeit3 ай бұрын
Thanks a bunch for the support!
@tomlong19583 ай бұрын
What tumblers did you use? Normally do sublimation for my wraps but very interested in using a laser. Glad to see you make mistakes as some of the videos it seems everything comes out perfectly. Gear drive on the chuck will always be better and more accurate than the rollers because as you said things can slip on the roller and you might not notice. Very important if you have to make more than one pass.
@cassandraknight64853 ай бұрын
I have only used my rotary chuck once. It turned out great but was a little nerve-racking, wondering if it would work!
@BigPapasWorkshop3 ай бұрын
I have only used laser on black flasks so far. Still haven't taken the rotary tool out of the box for tumblers. But I have a few ideas brewing for a Chrismas Cup! Keep up the good work, I'm loving the different projects!!!
@lemonsqueezycrafts68183 ай бұрын
Very cool tumblers!
@KimandGarrettmakeit3 ай бұрын
Thanks for checking them out, glad you liked them!
@primalgraphx57473 ай бұрын
awesome great tips can't wait to try
@KimandGarrettmakeit3 ай бұрын
I'm glad you found the tips helpful!
@mandod68693 ай бұрын
Just got my f1 ultra and an waiting to win these tumblers so I can make my first run. Thanks for your videos you help me make the move on my s1.
@TonyMueller3 ай бұрын
My Ultra is FINALLY on the way. The RA2 arrived today... what a tease. Everything else comes some time next week.
@normatejkl33043 ай бұрын
This looks so sweet and easy!
@KimandGarrettmakeit3 ай бұрын
Sweet and easy like a piece of cake!🍰
@Eric-e7j3 ай бұрын
Christina and I are expecting our 50 lbs of joy (F1 Ultra) to arrive today by the UPS stork. We don’t have a rotary yet for it but would be an excellent addition one day I know. That makes little brother Xtool Laserbox, big big brother 130watt Omtech and now the middle brother Ultra. The family is growing…
@alanhall39703 ай бұрын
Have you tried the chuck jaws inside the tumbler instead of on the outside edge?
@KimandGarrettmakeit3 ай бұрын
We did! Both techniques work just fine 👍
@gwenstone56463 ай бұрын
Thank you for sharing now I think I can do it!
@KimandGarrettmakeit3 ай бұрын
Watch out world, here comes the next tumbler sensation!😱
@ferdinandsantos66803 ай бұрын
I use the RA2 Pro as well. I usually do just 2 opposite sides. I haven’t had the courage to do a full wrap yet.😬
@KimandGarrettmakeit3 ай бұрын
Two sides are just the warm-up, the full wrap is where the real fun begins! You got this!
@SandraDoran3 ай бұрын
I have only done 1 so far with my laser ready to learn ❤
@KimandGarrettmakeit3 ай бұрын
That's awesome! Keep trying new things with your laser and have fun with it! 😁
@tyraglotzbach11753 ай бұрын
Omgoodness these are great!! 😊
@bradswope62033 ай бұрын
I just started trying to do tumblers on my Xtool F1
@loyalistman3 ай бұрын
I have an Omtech and would love a tumbler to try.
@PamelaHoover-c8c3 ай бұрын
Love, love, love this feature on the F1 Ultra!! Would love to be able to try it out! That's a lot of love in these comments....lol😅!
@sheilagordon-pope47073 ай бұрын
Haven't tried this yet. Would love to.
@netwrkops3 ай бұрын
Those are awesome.
@AndrewR743 ай бұрын
Those are pretty cool
@tomcleveland79733 ай бұрын
those are some foxy full wraps that would do on my F1 with a chuck as roller walking is a pain as I like a second ir pass to clean it up!
@KimandGarrettmakeit3 ай бұрын
This week we are showing how to make a full wrap design. I want to try the chuck again and run a second pass with the IR.
@vanschat3 ай бұрын
This makes me want to get my Rotary going. I've been putting it off but I haven't had the courage to do it.
@RaySchreckengostEtching3 ай бұрын
I find it funny the week after I buy my htvront for wraps this vid pops up. Been running pros and cons of the tumbler game and wraps for me were best profit per hour. Wrap images are plentiful on creative fabrica so it made sense to me.