Ugrc Dirty South New Drive with body and offset Dravtech front shocks, I gotta go back into them and

[@CitizenBob40000]

I did a body bend like you speak of using a heat gun and a PCV pipe as a form to bend/wrap the body side around.

[@cyclonerc1625]

GOOD MORNING EVERYONE 👋 Thank's for Sharing Joe 👊✌

[@oldironsfury]

One bada$$ truck A internet handshake 🤝 sent brother 👍👍

[@ExocagedRC]

One sent back!

[@ekpauly]

I always love watching how you mod things and make things work, thats what being a hobbyist is all about. But this glueing bead locks is a little on the dark side, lol. I can’t wait to see more of this build! 🤙🏽

[@JoeOvercoat]

Don’t mind the man behind the curtain… gluing bead locks!

[@johnwoods2035]

Great vid. The wheels r the sweetest right behind the front end setup. I cant get my steering to work worth crap. Turns tight to the right and football field left turn.

[@rgilerc7700]

Ideas for the body roll: -Cool, wet towel to protect the rest of the body -Heat gun on the bottom edge and fold it over something straight Nice crawling and I am thinking on putting the 1:24 Dodge on my SCX24. Love that one!

[@JoeOvercoat]

Dodge always wins on style. 😎

[@JoeOvercoat]

Very cool hub design.

[@anneellington8603]

That thing crawls so nice

[@zsaxeshed5743]

Cut the bed and bend the cab,awesome truck dude

[@JUMBOs-RC]

I love the deep dish option

[@markstopczynski5869]

Once you get those shocks tuned you will love them.

[@extremercbashers9975]

Ugrc happy birthday man

[@brianargo1659]

u can get some rubber "O" Rings that r the size of those Beed locks from ur local Auto parts store and pinch them in between and maybe stop the slip. If they would get tight enough to take some really rough sandpaper to where the metal bits into the rubber would be cool. Or some kind of washer just to close the gap in there would also be cool. But cool build and video, 👍

[@duder280z]

Holy shit! Holmes finally came out with the Crawlmaster V2! I just ordered 2, I've been waiting over a year!

[@ExocagedRC]

I got 2 of them too. LoL was on the second order I was quick!! LoL

[@JoeOvercoat]

@@ExocagedRC Second?!? Asleep at the switch, I say! Asleep at the switch. The shame.

[@craigengelman4534]

i watched a older video this morning showing the bully 2.2 crawler with the bully 2.2 competition tires going up all most vertical rocks . so after seeing that i ordered 1/10 Velocity 2.2" 12mm Buggy Wheels from proline $10 a pair . then i ordered the 1/10 Hole Shot 3.0 M4 4WD Front 2.2" Off-Road Buggy Tires $23 a pair from proline . reason is i pulled my 4 inch wide hole shot 3.8 off my truggy and tried them on my integy steel cage crawler and omg they climbed a piece of 6 feet long wet plywood at 60 degrees to the top !!!

[@craigengelman4534]

watch this video and you will see why !!! kzbin.info/www/bejne/aqu3nmiBf8uYoqM those are insane grip tires !!

[@brianellison3525]

Quick tip, Calculate overdrive 360° = 100% Put dot on tape, put tape on tires. Put rig on stand and run it slowly till one tire does one turn Stop Where is the other tire? The difference in degrees translates to difference in percentage. 90° = 25% 180° = 50%. 270° = 75% So if on tire turns 360, And the other turns 270, then you have a difference of 25%. That is the amount of your overdrive. Sorry that was long winded, but I didn't want to just drop the equation and go. And I don't care what you say, I'm a biker. I've ridden a thousand miles for a hamburger. Don't knock your place as not worth driving to, A big Glide towing a little trailer with RC stuff in it? Sounds like a fun couple weeks. Love your channel, man keep it real. Have fun (duh), And be well.

[@ConsciousnessAndScience]

I agree brother. I'd love to make the trip from seattle. and I think it would be more then worth the drive.

[@brianellison3525]

@@ConsciousnessAndScience you think with a handle like coast to coast RC, it would almost be mandatory. Lol I left Seattle a while back. I moved west. I'm building a house right at the foot of Mt. Olympus. You wanna ride to FL., Let me know.

[@ConsciousnessAndScience]

I got the name because I'm from Washington state and I moved to Massachusetts. And that's where I started in the hobby so coast2coast was born.

[@ConsciousnessAndScience]

I'm down. Brother for sure.

[@brianellison3525]

@@ConsciousnessAndScience cool, it'll be next summer, I've kinda got this one planned out already. Building a house and all lol

[@vincec9451]

Gorgeous Wheels👋🌏

[@sacredsquirrel2112]

Man! That thing is an absolute Weapon!! Comp killer??

[@mr4x4s]

The Tusk tires require an insert about 3mm more diameter than the standard printed ones. I print my own and have a size specific to the Tusk tires, as well as the Rupture tires. If I knew how to get ahold of you, I’d send you a set 😉

[@ExocagedRC]

I have an email and I’d try them. [e-mail]

[@gabrielguadarrama8701]

I found the proline dual stage foams work best for jconcepts tires. The original proline dual stage foams not the new ones. That and 50w oil with losi pink soft springs =win win. You will drive in droop set up all the time and give you better control over sprung weight

[@lasombra577]

Hello sir..I was going to print my own inserts...what diameter size do I need for the ruptures...?

[@CasperRc81]

Maybe leave that back left tire to spin for cheap cheat dig. I like to unlock my trx4 in the rear run a tall tire and jam it into the body under articulation. The I can have a cheat dig when needed. Nice build

[@silentjde]

I have 3 sets of ProBuilds and didn’t have any issues mounting them, not sure what going on with yours

[@clarkb1900]

A DSM strap on the axle would lower the front, while keeping the flex stiffer for stability.

[@johngookinsable]

Exo 1 makes perfect sense. You could perfect it by each version and sell them as a kit? Just saying.👍🤟

[@Scale-Crawler-tamiya-Xray-RC]

Wahooo 👍👍👍👍👍 Love it

[@kjs6469]

Nice ride. I would like to suggest to cut it at the seem that way you can bend it easier. Possibly cutting the bed part off.

[@kjs6469]

@Josey Wilds Doesn't the body curve back to the bed, where I thought he's taking about?

[@gregory9157]

I am curios to see the bending. Good luck 👍

[@craigengelman4534]

to bend in super easy . put a pencil behind body then heat with a heat gun or hair dryer bend over pencil then run cold water over it

[@Jellybean_191]

This is BAD ASS.

[@bubbahutsenpiller3059]

Have you ever used lead shot inside of the RC tires ?¿

[@majorrhodes2870]

Nice 👍👍

[@Toysojah671]

@Exocaged Rc whats your wheelbase?

[@RIDEROFTHESTORM-in6pt]

@ 14.00 👍🏾👍🏾👍🏾👍🏾👍🏾👍🏾

[@old-rcplane-phart]

'ExoWon'. 'ExoToo'. 'Exo3', etc. 😁😎😄

[@old-rcplane-phart]

👍😁1

[@Toysojah671]

@Exocaged RC whats yoir wheelbase

[@jhawk1985]

I have Proline trenchers on my probuild wheels and they dont spin.... thats strange that the jconcepts do🤷‍♂️

[@dirtrider88]

10:05 literally rubbing before you could finish that sentence

[@Eric_Cahill]

I glue my wheels with that all the time all you need is a nice bead on the outside touching the tire and wheel. No need to shove it in there.

[@markskielliott5962]

Those shock caps are to lay the shock down. Might as well just run with the stock caps if your standing the shock more upright

[@TheAmericanUhate]

They can have more than a single application. There is no rules stating anything must be ran any certain way.

[@markskielliott5962]

@@TheAmericanUhate oh for sure

[@blakedenley3792]

Gluing a real beadlock wheel, that's sad.

[@jimlayhey1965]

are those 80 mm shocks