Exotic JZ Cobra Concept update in HD

  Рет қаралды 7,161

STIGZ

STIGZ

Күн бұрын

Here Is an update on the JZ Cobra concept reshell on a supra. This has not been painted yet. The black is only a guide coat. The whole car has been wet sanded with 400 grit. Next the whole car will be wet sanded with 1000 grit ready for paint. Most of my subscribers will notice a few differences in the body work compared to my last video. I will also be changing the roof shape of this JZ Cobra Concept like many other exotic super cars have done in recent years - like the Lambo Aventador and some newer supra concepts. I will put up a step by step video of this. If you want particular details of this filmed then please make your request now. JZ Cobra, JZ Cobra Concept.

Пікірлер: 52
@Nosloveingneko
@Nosloveingneko 11 жыл бұрын
True, it does have a very unusual look to the front end. Its the aircraft avionics and futuristic look to the car that swoons me.
@S1KRYD
@S1KRYD 11 жыл бұрын
Green and black - the green you see on the headlight.It is called Atomic green and it is a metallic that looks just like a Kandy.For now I will have no rear wing since that is still in fashion.But I defiantly will build a wing to suit and it will be remote controlled.Not much weight has been added because a lot of weight was dropped off when panels were replaced.But the very big sound system that will be installed will likely add about 100KG. Not a prob for an engine that can easy do 6-700HP
@rarkup
@rarkup 2 жыл бұрын
This is still around after all these years at JDM NZ meets and it’s nice to see it in its glory held up well for 10+ years
@S1KRYD
@S1KRYD 11 жыл бұрын
Thanks Jess. I will take you for a ride to auks and back when it is finished!
@Shadowenclave47
@Shadowenclave47 11 жыл бұрын
I was just listening to the first song not 5 min ago and then i came to your channel and the same song played.
@S1KRYD
@S1KRYD 11 жыл бұрын
Thanks. With a bit of imagination you could change your Camaro. But it sounds like it could be a classic. In that case leave it alone!
@C-M-E
@C-M-E 11 жыл бұрын
God, it's delicious! Deviously delicious at that! Aside from your primo work on the rear end, my favorite bit is that hood! Vented hoots are always fantastic, but having a one off is even better. Well done, chap! Bravo!!
@S1KRYD
@S1KRYD 11 жыл бұрын
Hey thanks for that mate. It is very solid and not floppy. The top line that is just below the mirrors and curves round the front bumper is the line I think you are referring to? This line gives it the look of the head of a king cobra, and is integral to the design. It is one of the things I like the most. But you have brought one thing to my attention.The very bottom skirting of the front bumper from the side needs some work to bring it in harmony with the rest of the side. Thanks 4 ur opinion
@S1KRYD
@S1KRYD 11 жыл бұрын
Yes I know what you mean. The thing that gives me peace of mind is that I have the means to replicate it quickly if something does happen. No use worrying about it. A hurricane could come or an earthquake. These things happen.
@Xempt_One
@Xempt_One 11 жыл бұрын
awesome work man, cant wait to see what you do with the roof. it does look like it needs a shape change with that wide back end. keep up the good work
@S1KRYD
@S1KRYD 11 жыл бұрын
Thanks bro. Yea Tokey is my nephew. What do you mean by studying? Are there courses for this kind of thing? I had to teach myself. This is the way cars were designed back in the 70s. Now it is all done by computer and the computer does all the clay work as well. I am trying to show people like us that we can just go and do it with our own hands with out millions of moola worth of gear.
@D1zzyEdits
@D1zzyEdits 11 жыл бұрын
Tokey Sent me here, nice work bro. this is what i am studying for when i get a job
@Mrmodeltrainz
@Mrmodeltrainz 11 жыл бұрын
I love the look of this Supra, and can't wait to see what you do with the roofline!
@S1KRYD
@S1KRYD 11 жыл бұрын
Thankyou. You are too kind sir.
@Triscuitwells
@Triscuitwells 11 жыл бұрын
I cannot stand Supras but you have done an amazing job.. Not my kind of car AT ALL but you have some skill. Very well done! I wish i could do something like this to change the style of my 83 Camaro.
@homestew66
@homestew66 11 жыл бұрын
I've been watching your supra since you first started making changes to it and I still get excited everytime you post a video. lol
@TCreatorO
@TCreatorO 11 жыл бұрын
Holy shit dude! That looks freaking awesome!!!! And now you're going to work on your white celica?
@bbdart007
@bbdart007 11 жыл бұрын
This bodykit pretty awesome but I still like your green one more
@S1KRYD
@S1KRYD 11 жыл бұрын
Kairo Kingdom - One Two
@S1KRYD
@S1KRYD 11 жыл бұрын
I am assuming it is a wide body kit and that your door panel is fiberglass or carbon fibre. In that case it will be any easy fix with fiberglass. Do you still have the entire panel? Because if you do not you will need to do a bit of clay work to replace the bits missing. If you do then fiberglass the inside of the panel then attach it back to the car and let it set in the right shape
@S1KRYD
@S1KRYD 11 жыл бұрын
Not quite. I still have to change the shape of the roof a little yet and it needs a proper paint job. Also the interior needs finishing.
@TCreatorO
@TCreatorO 11 жыл бұрын
i havent worked on the body yet, only maintenance, i changed the shocks for the tailgate, i swapped the leds over to a new cluster because the old one was fozend and wasn't marking the mileage, so i had no clue when to do the oil change lol, also i started to open one of the headlights, they are a huge pain to open, it takes me about 4 hours each! because if you use heat to try to soften the silicon, the plastic from the headlight melts 1st lol, so i need to cut the edges and then the glue
@S1KRYD
@S1KRYD 11 жыл бұрын
ah but which video was the better one with this song?
@iamaroused
@iamaroused 11 жыл бұрын
such a sick ride, keep it up!
@Nosloveingneko
@Nosloveingneko 11 жыл бұрын
It looks fantastic! Cant wait to see the finished product! I do have some more questions though. What color do you plan on painting it? Do you plan on putting some sort of spoiler on it or leaving it as is? And has the car gained any weight? and if so how much would you say?
@davidnnn96
@davidnnn96 11 жыл бұрын
looks great looking forward to more!
@S1KRYD
@S1KRYD 11 жыл бұрын
I am not a great fan of the Avtech wx3. The front end looks like a salamanders head. But I have a lot of respect for the creators of that car.
@TheArtResistance
@TheArtResistance 11 жыл бұрын
This is so good. Sharing -Jesse
@ZILLAGARAGE2
@ZILLAGARAGE2 10 жыл бұрын
You should make a ft-1 inspired car
@nicknsk8er
@nicknsk8er 11 жыл бұрын
I wish i could even make a simple bodykit for my mazda 6, that will never happen though lol, i dont know what to do nor i have the tools to get started.
@S1KRYD
@S1KRYD 11 жыл бұрын
I have not heard from you for a while dude! How's your project coming along?
@IamApthy
@IamApthy 11 жыл бұрын
Tokey sent me here, nice work! :)
@xBeastyZz
@xBeastyZz 11 жыл бұрын
Tokey sent me. This is awesome
@Nosloveingneko
@Nosloveingneko 11 жыл бұрын
Remote controlled huh? I would love to see something similar to the Vector M12's spoiler.
@IntrehstHD
@IntrehstHD 11 жыл бұрын
Tokey sent me here, nice work
@TCreatorO
@TCreatorO 11 жыл бұрын
yeah, I've been watching your videos since back when it used to be green lol, I just want to post it there because the principle is the same it applies to any car and about your celica, you should really make your own design instead of just making a replica, that way you can use any headlights and taillights and wont have to worry about making or buying OEM headlights and taillights, also replica kits a lot of people look down at them, but they like more original designs, I like both
@S1KRYD
@S1KRYD 11 жыл бұрын
Yes. Toyota supra donor
@LenoxMusic
@LenoxMusic 11 жыл бұрын
Tokey told me to say hi.
@oPRNGL
@oPRNGL 11 жыл бұрын
tokey sent me here
@HuntLikeAWolf
@HuntLikeAWolf 11 жыл бұрын
Tokey sent me here :) nice
@S1KRYD
@S1KRYD 11 жыл бұрын
Yes you can. But you know this is a supra donor right?
@nicknsk8er
@nicknsk8er 11 жыл бұрын
i would be so mad if i spent so much time making this awesome peice of work and something happens to it.
@mickwinir6450
@mickwinir6450 11 жыл бұрын
my door panel broke. do u know any why i can fix it using fiberglass or clay
@germslover6662
@germslover6662 10 жыл бұрын
Dude, really like what you've done to your auto. How long have you been working at it now? I had a Mit eclipse and some scum bags ripped it off and tried opening my lambo doors out and totally ruined them. They stole my interior, stripped the body work off, got the engine, when the police recovered it they had even taken the suspension, it was a total loss. After that I kind totally lost interest in customizing my cars anymore, C'est la vie. Good luck, looks great.
@Nosloveingneko
@Nosloveingneko 11 жыл бұрын
Ooops. I meant Avtech WX3.
@johnkor
@johnkor 11 жыл бұрын
I wonder is it gonna be on road ? what donor body u using ? is it a FTO ?
@TCreatorO
@TCreatorO 11 жыл бұрын
can I promote your channel and videos on the celica forums?
@SonyPsp08888
@SonyPsp08888 11 жыл бұрын
it's done already ?
@Gompop
@Gompop 11 жыл бұрын
Song?
@user-ih7wj1oe4g
@user-ih7wj1oe4g 8 жыл бұрын
Hey dude, I like your concepts! I was just randomly watching and I am planning to do a similar thing using a Pontiac solstice, you can follow me at @TorcenteMotors for updates and maybe we can trade ideas and what not. Anyways, love the song, I just realized that this was Metric in the background which is my uncles band. I hope to see more videos from you! Cheers!
@D1zzyEdits
@D1zzyEdits 11 жыл бұрын
yeah man, good job though the car looks sick! its called automotive engineering now days -.- hahaha
@TCreatorO
@TCreatorO 11 жыл бұрын
send me your email,. and I will send you my designs, and Ill design an aggressive exotic looking one or more to see if I can inspire you to do something more original that noone else has and might want to buy. right now Im working on making one of my designs on bigger paper and changing some things around. send me your email. and Ill send you some pictures of my designs, take care, im late for work
Building A wide body for a 1000HP S15
24:34
STIGZ
Рет қаралды 1,9 МЛН
Dad Makes Daughter Clean Up Spilled Chips #shorts
00:16
Fabiosa Stories
Рет қаралды 8 МЛН
Шок. Никокадо Авокадо похудел на 110 кг
00:44
Just Give me my Money!
00:18
GL Show Russian
Рет қаралды 1,1 МЛН
Custom rear window spoiler
6:20
ScrewLooseFabrication
Рет қаралды 178 М.
BA (Hons) Automotive Design at Swansea College of Art UWTSD
3:18
UWTSD Swansea College of Art
Рет қаралды 303 М.
Design process of BMW 7 series
11:05
junction of engineering
Рет қаралды 107 М.
EDAG Light Cocoon - The Making Of
5:50
EDAG Group
Рет қаралды 168 М.
Fortune RX7 Painted & almost finished
5:07
STIGZ
Рет қаралды 56 М.