Extra Fast Printing on Low Cost Ender 3 V3 SE

Chuck shares a faster Cura Profile for Ender 3 V3 SE and fixes a chair with a Practical Print in this episode of Filament Friday.
Video Sponsored by:
www.pcbway.com
Ender 3 V3 SE EF020 Profile and Chair 3D Print:
thangs.com/fil...
Buy Ender 3 V3 SE:
shrsl.com/4avrd
K1 and K1 Max Cura Profile:
thangs.com/fil...
Buy K1:
K1 Max: shrsl.com/4avrb
K1: shrsl.com/4avrc
K1 Max Side Spool Holder:
thangs.com/fil...
Filament Friday Tool Kit:
amzn.to/2MOR00X
Filament Friday E-Leveler 2 for Bed Leveling:
amzn.to/3Yz3Vc2
Buy - Filament Friday E-Leveler 2:
amzn.to/3qUl80A
(Original version: amzn.to/3qEr2mw)
How to Use the E-Leveler 2: www.chepclub.c...
********* $3 - Ender Style Cura Profiles Download Links: *******
Latest V5.x Profiles: rb.gy/5k981c
TPU Profiles: shorturl.at/V08bk
PETG Profiles: shorturl.at/RLEfI
(Free to Patreon Members)
**** Support the Channel *****************
Patreon: / elproducts
Thangs: than.gs/u/240257
Direct Via Paypal: www.paypal.me/...
Shop at MatterHackers.com and automatically donate at no cost to you: bit.ly/1Ugcijp
***** Tools *****
T - Handle Allen Wrench Set: amzn.to/3MBBv8i
Nozzle Removal Tool:
Palm Ratchet: amzn.to/3u6ncm7
Premium Version with Rubber Grip: amzn.to/3qPs3pB
1/4'' Socket: amzn.to/2OjdHdg
***** Popular Prints:
CHEP Cube Test Print: thangs.com/fil...
CHEP PTFE Cutter Tool: thangs.com/fil...
CHEP Pawn: thangs.com/fil...
Direct Support through PayPal donation:
www.paypal.me/...
Buy thru this link to Slice Engineering for the Best Hot Ends and get 5% off your purchase:
www.sliceengin...
************************************
***Creality Ender 3 Parts/Upgrades ****
Ender 3 Glass Bed:
Amazon: amzn.to/3tYea7m
Replacement Nozzles for CR10/Ender 3:
amzn.to/2m39K1y
X-Axis Tensioner
amzn.to/38BKbYP
Y-Axis Tensioner
amzn.to/2PhOdhi
Chuck's Favorite EZR Extruder:
bit.ly/2rlKCpp
Creality 8-bit Silent Stepper Board: amzn.to/2YPM0Nh
Cap Tubes & Couplings: amzn.to/2Vf8BCf
CR10/Creality Ender 3 Nozzles: amzn.to/2m39K1y
CR10/Ender3 Silicon Heater Block Cover: amzn.to/3sfDG7s
Solder Sleeve Kit: amzn.to/2Pqqngm
Creality Ender 3 Fan Set (24v): amzn.to/38u9aOl
CR-10 Fan Set (12v): amzn.to/2PrcCxK
T-Nuts Kit: amzn.to/2LsQZg8
Screw Kit: amzn.to/2Va8uGK
Temperature Meter Used in Videos: amzn.to/2JpUJOC
Screwdriver set used in Videos: amzn.to/2PbWocM
Creality Ender 3 Upgrade Package (Extruder, Silent Board & Capricorn Tubing): bit.ly/2MNvmcs
**** Support the Channel *****************
EBAY USA: ebay.to/1wtxfiU
EBAY UK: ebay.eu/2qdC5iy
EBAY Canada: bit.ly/2qdGRwh
Note:
As an Amazon Associate, I earn from qualifying purchases.
****************************************************
Filament Friday Sticker:
Send Self Addressed Stamped Envelope to:
Electronic Products
PO Box 251
Milford, MI 48381
****************************************************
Chuck's Arduino Book:
amzn.to/3tA31JP
Intro animation by Pablo Licari based on Filament Friday Logo by Brian Carter.

[@seanmartin1433]

I've been 3 printing for over 6 years now. I've watched lots of your videos. My first printer was an original ender 3. I've spent alot of time modding peoples 3d printers. Personally I hate Cura, I used it for about a year and dropped it for super slicer. I find it very strange to not write my own firmware for my printers. Currently there is no marlin example files for this printer ATM on marlin. Do you have any idea when it will come out? I love this printer tho. 20 min setup time and amazing prints right out of the box. Looking at upgrades for this printer I'd like to add another z axis motor rather than use the loop to control the 2nd z axis. I used ur slicer profile and got half decent prints. I used creality's slicer and the time was much shorter than urs, but the actually print time is almost identical. I am working on upping the print speeds for this printer, I'd really like to get a profile set on superslucer rather than dreaded cura. If you have any ideas I'd appreciate it

[@irreverend_]

I usually use faster settings than even those on my V3 SE. I also noticed that setting the acceleration and jerk higher doesn't affect the print quality too much on that printer, but does increase the print speed quite significantly

[@railgap]

Each time a new tool, trick, or technique for faster printing has been posted - from CHEP and everyone else - I have added it to my process. My printer now finishes full-print-volume jobs in a few seconds, before I even send the file to the OctoPi. ^_^

[@Zeltroix]

Huh?

[@micver1091]

My se runs like crazy. Print in place they come of super nice . Even the air engine. Bal BEARINGS. Working hinges. Most of the i print in place. Juat the probe is not so good. Bud happy me old school printer juat dial the offset in. Kuat as Easy as waiting for the machine to it

[@justinchamberlin4195]

I'm a huge sucker for practical printing videos, and you looked exceptionally comfortable under that PCBWay blanket.

[@marine1718]

Cheap is about time you migrate to orca slicer community needs you there 😅😅😅

[@ServentofTheMostMerciful]

AGREE

[@MCsCreations]

Excellent! Thanks so much, Chuck! 😊 Stay safe there with your family! 🖖😊 And happy holidays!

[@JacobShepherdEngineer]

I'd love a fast profile for the Sovol SV06. Any way to convert a profile from one machine to another?

[@FilamentFriday]

That same setup should work with SV06

[@jonathanmassy5859]

do you have a profile for the KE version of the ender-3 v3, normal print instead of fast or extra fast?

[@StrvoJdkanse]

Have you been able to solve this?

[@gordonlaurie1201]

@@StrvoJdkanse Just use the SE

[@noobt4eguns]

Nice video again my friend 👍🏻

[@3dpathfinder]

Im loving my K1 Max and Ender 3 V3 KE. Love your videos/ fellow noobie youtuber here

[@runeadalsbjrg2717]

Thank you for your great channel. I wish you could make a video about the new Cerality CR-10_SE printer., and how we can use Cura as a slicing software.

[@gunsboy77]

Thanks a lot for this profile. I actually don't get those options to create a new profile but that is fine since I don't have one with the same name. Just started a 15 hours print with this profile on my V3 SE. The first few layers are looking good. This Creality PLA filament is not that great, it gets cut off when the printer is sitting idling, even though I just opened it a couple of days ago but I think it has moisture. When I sliced it on the original profile, it said 21 hours. Let's see if we can get a 6 hour saving or have this PLA die on me before that.

[@dgvigil]

I love this video. It provides a great practical project AND a nice fast profile for my first printer ever. Thanks!

[@reasonablebeing5392]

Love the nostalgic opening and always love practical prints. Great tip on modeling the object that you want to cover first. Interesting speed comparisons.

[@oldfart83]

My first Ender 3 V# SE quit 1 week after Amazon return date. Would show blue screen but nothing to select. Got part of my money back, less $40 Restocking fee, so they could resell it to someone else. Second on was bad out of the box, rumbled when bed moved on X axis and male functioned on leveling. Bought Neptune 3 PRO and very happy so far

[@omegadeepblue1407]

Yeah, the Neptune 3 Pro is an amazing printer, sadly the Neptune 4 does not makes justice to it's legacy on budget 3D printing

[@Stuntman707]

I was looking at the Neptune 4 as an upgrade until Bambu just unveiled their new A1 bed slinger.

[@peejayw]

I printed this on my ageing Ender 3 original using a Micro Swiss direct drive, printed fine. Thanks for the profile.

[@Vortec.Z32]

I just got my first printer a (ender 3-3d) a few weeks ago ive done multiple prints and im hooked to say the least. So naturally im looking at upgades, etc. And mostly learning the basics. I was looking for leveling help and ran across your v2 tool. I'm definitely gonna pick that up along with an auto level upgrade seeing how mine all manual. Now i see this video, and im trying to follow with what little knowledge i have with these so far, but my question with all these profiles you made are they interchangeable with other printers like the one you made for the ender 2 pro can i use thisbon my ender 3? And what happens if i swap to a say 0.8 nozzle from the 0.4 factory one. Will these become obsolete?

[@darlenesmith6424]

Just found your channel and subscribed. I am brand new to 3D printing and boy what a learning curve. I followed the steps in your video to load the SE EF profile, but when I try slicing with the profile it failed and wants me to report a bug to the issue tracker. Any suggestions?

[@jamesfrancisco1488]

Waiting for Ender 3 v3 KE content! Can't wait for your profile!

[@ZhakRyuu]

Mate, your last video about this printer you said dont get it expecting it to be fast, now this. I am confused?

[@wescargill2716]

Thanks for all your great work Chuck! I just ordered this printer and can't wait to try your Cura profile. Can you say if this profile will work properly using Cura 5.7 with the built in printer?

[@FilamentFriday]

I would base it on a standard Ender 3 Pro machine profile.

[@chriseastty2874]

Can you do a comparison of this printer and the original ended 3 please

[@sevagjb]

Thanks Chuck when we will see the cura 5.5 profiles in (BRONZE+) ?

[@FilamentFriday]

Still working around issues with V5.5, V5.6.

[@yasin_uyghur]

Could you please share the profile ? I couldn’t find as your shared : Ender 3 V3 SE EF020 Profile

[@FilamentFriday]

Link in description

[@iseeupeeingalso]

is this the same file that is used for the stock ender 3 that you posted before? and have you tweeked anything on that extra fast file?

[@FilamentFriday]

It’s built for the SE.

[@ronm6585]

Nice, thanks CHEP.

[@cannacdkofficial3028]

I have been watching your videos for awhile now and they are really great. I am even a new supporter of yours on your website. One issue I am having is my CR-10s is not working at the moment and I am running my Anycubic Kobra Go and none of your .curaprofile files are compatible. I am trying to replicate your print profiles manually but for one reason or another I haven't been able to do so. Would it be possible for you to list your print settings? I know to do so for each of your profiles is asking a lot but even just the "CHEP 2.0 PLA" (using 0.28mm) print settings would be awesome. That is the profile I used the most and build my other profiles off of.

[@FilamentFriday]

They are compatible. Just choose a Creality machine profile in Cura that is similar in size to your printer. Then you can use the profiles.

[@cannacdkofficial3028]

@@FilamentFriday Oh awesome, I will give that a try. Thank you!

[@TherealHK-47]

Does anyone know if there is a glass printer you can get for the Ender 3 V3 SE? Or will the regular ender 3 glass bed fit

[@FilamentFriday]

Glass bed should fit. Not sure if that will affect the Auto Z offset.

[@seanmartin1433]

I installed a classic glass bed on the se with no issues

[@CJ-ur3fx]

0:27 Absolute first class product placement! lulz

[@FilamentFriday]

Wondered if anybody would catch that. ;)

[@antonkukoba3378]

I don't see the download link for the model anywhere

[@FilamentFriday]

It’s part of the profile download like I showed near near the end. I updated the title. Ender 3 V3 SE EF020 Profile and Chair 3D Print: thangs.com/file/975372

[@SpaceJazz3K]

Bambu is going to push a lot of older machines aside. But hope this encourages competition.

[@FilamentFriday]

Maybe but more than twice the price and closed source firmware/electronics.

[@Stuntman707]

Bambu is bringing the upgraded high speed experience to bed slingers. It would be nice to see Creality catch up and finally get rid of all the obsolete Ender 3 models.

[@antonkukoba3378]

in a year, when they start to deliver the preorders and when it will be actually possible to buy them.

[@andreas.grundler]

@@Stuntman707 You should be better informed. Even before the A1 and A1 Mini, there were bedslingers that reached 500mm/s. Bambu Lab is late to the party. What stands out about the A1 is the ease of use, not the speed.

[@FilamentFriday]

@Stuntman707 - I’ll be testing the Creality Ender 3 KE soon that has Klipper installed for higher speed.

[@GreenAppelPie]

I think Ender’s days are numbered with Bambu’s bedslinger.

[@FilamentFriday]

Maybe but more than twice the price and I don’t like the closed source firmware/electronics.

[@Stuntman707]

True but it’s built as a high speed bed slinger out the box which the Ender 3 isn’t. Linear rails, direct drive extruder, no tool swappable hot ends, multi filament capability, auto nozzle cleaning, auto levelling, same flat bed as the core xy machines. (My Ender 3 bed was warped which I had to fix) The Ender 3 is an enthusiast machine which you will spend the same money as a Bambu on fixing it. Bambu’s bed slinger is a better refined household high speed printer with none of the hassle of the Ender 3.

[@FilamentFriday]

@Stuntman707 - For about that same price I’d rather get an enclosed K1.

[@frankhovis]

Always hoping it doesn't burn your house down or electrocute you while using it.

[@Dragonista89]

i think its rude and wrong to have all these patreon supporters and plus have company always sponsor the videos......

[@inoob26]

Patreon is for people to support him, not to remove ads. He isnt selling a KZbin Premium experience

[@yaabop1]

If he was lying and selling nonsense then it would be rude

[@definitelynotchadfish]

Yeah, you’re a bit off base mate. It’s legit how the dude makes money. He’s providing an educational service completely for free to loads of KZbin subscribers. The least you can do is pretend to listen to an add.