Extreme Chassis & Underbody Protection - Part 1 - Sandblasting & Jotamastic Epoxy Primer

#navara #underbody #epoxyprimer
This is Part 1 of an Extreme Chassis & Underbody Protection vlog/guide where I'm dismantling preparing & sandblasting my Nissan Navara d40 before applying Jotun Epoxy primer as the first stage of the full treatment.
Join me in Parts 2 & 3 for the Topcoat, Plate Welding & Cavity Wax/Lanoguard Protection steps.
Material List & Stage Guide Document - drive.google.com/file/d/1PMka...
MK Blaster - mkblaster.com/
Rawlins Paints - www.rawlinspaints.com/
Jotun Paints - www.jotun.com/gb-en
Instagram : / primal_nomad
Twitter: / primal_nomad
Facebook: / primalnomad
Check out the Wodesman Podcast - / @thewodesmanpodcast80

[@PrimalNomad]

There a document link in the description with all of the materials I used, ratios & stage guide if you intend to do this yourself! Good luck 🔥

[@Gunslinger-1962-martin]

You do go that extra mile Liam 🙌 Awesome video mate 👏👏👌👍

[@PrimalNomad]

Thanks Martin! It had to be done to put the mind at rest for the future, appreciate you watching 🙏

[@ChiefScout_Outdoors]

Wowzer Nice one Liam, as a former Navarro owner, I would never have thought to go at mine in this way. She was an amazing work calls for me on the building sites and I did adapt the back so it will take Pallet easier.. Makes me wish I had her back again, putting the kayaks on the back and going back around the coves of St Ives Cornwall. Looking forward to part two. All the very best fella 🤩👊🌟

[@PrimalNomad]

Thanks so much mate! It was a huge undertaking but I rarely do things by half so had to be done haha! They're great trucks, I just miss the ability to stand up sometimes haha. Hope you're well and appreciate the comment!

[@NSFmedia]

Nice work! One tip is to plug all the holes on the frame from the cab backwards, that will help to prevent any dirt and water to enter the frame.

[@PrimalNomad]

Thanks ! I'll have a look into this & start counting holes haha

[@bubo7321]

Nice work, the front bumper is very nice

[@PrimalNomad]

Thanks! It's a great bit of kit

[@paulliddle8008]

That was fascinating buddy, youre braver than i am 😂 The sand blasting does an amazing job, looking forward to the next episode. Laters dude 🙂🔥👍🏻

[@PrimalNomad]

Thanks Paul! It was certainly hard work but well worth the outcome. 🔥

[@freddyoutdoors]

Really great watch your all doing a great job

[@PrimalNomad]

Thanks Freddy!

[@rikagterhuis9419]

Hello Liam, great video and I really enjoyed it. From Ozy

[@PrimalNomad]

Thanks so much! Really glad you liked it 🤙

[@JasonColeMBCSMIET]

Hello there that's a good project for you to do your own car, It teaches you about cleaning and preservation of your car. Ps leaving the stripping and building of your car to engineers can be a good lesson to keep your knowledge of your own car updated, For when you go for a MOT, The Springs can be upgrade to help with the lower or ride of the car.

[@PrimalNomad]

Thanks for your comment! It's been a big job and we'll worth doing. Tom is a great mechanic and very skilled so I always trust him with the truck. 🔥🙏

[@thomasmacias5032]

AWESOME Liam just dropped a video 9:00 am here in California grab some coffee ☕️ kick back and watch thank you 🙏 Primal Nomad 🙏💙🇺🇸

[@PrimalNomad]

Really appreciate it Thomas! Thanks for watching. I hope you enjoyed & are doing well, have a great day 🙏

[@tourcheverybridge]

no one wants there underbody to rust and go crusty…..😂😂

[@PrimalNomad]

Haha! No one at all