How to Replace a GE Cafe Refrigerator RPWFE Water Filter

[@murraylichter4856]

I watched several videos on replacing this GE water filter with NO luck. You were the only one that discussed the inside of the connector being either gray or blue. This was the trick. I kept trying to turn the filter which is why I could not get it in the receptacle. Thank you very much for your help. It is very appreciated.

[@Housebarons]

Hi Murray, so happy this video helped, thanks much for posting this comment!

[@hankzupnick8402]

Clear and easy to follow. Especially helpful with the choices to be aware of (blue vs gray, twist vs pull).

[@Housebarons]

Hey Hank, Thx for the comments and for watching!

[@diannemetcalf1046]

OMG. This was so helpful. You made is very clear that the part that is gray is the cartridge holder. Thank you!

[@Housebarons]

Hi Dianne, glad you found this video to be helpful, thanks for your comments!

[@megmeehan7051]

I refer to this video every time I have to change my filter. Thank you!

[@Housebarons]

Hey Meg, Awesome! We appreciate the multiple views!! Thx for the help!

[@zolakaya]

Simple as it is - My default was always to twist this thing - Broke the last one by twisting it - Couldn't remember to twist or not to twist, I found your video. Now, it's hopefully registered in my memory how simple this filter is to replace. Thank you kindly for posting this for old nimrods like meself! Cheers

[@Housebarons]

Hey zolakaya, Glad it helped! Thx for watching!

[@snowbird1831]

Thanks for the clear instructions and talking slow enough for me to follow. I replaced my generic filter with a new GE Filter and, even after running 5 gallons of water, it still tastes awful. Did anyone else have this problem?

[@Housebarons]

Hi Snow Bird, it is odd that you are having trouble with your water after replacing the filter. Maybe you can get a water test done to make sure everything is okay with your plumbing system. Good luck!

[@katielowen]

This helped a TON; we have a grey bracket one and were having the hardest time when the inner white piece/slot inside the bracket wasn’t moved all the way over, for the new filter to go in. Thanks a ton for the video!!

[@Housebarons]

Hey @katielowen127, Glad you liked it! Thx for watching!

[@rick3300]

I used a wooden spoon handle to move the white piece to get the right alinement. Then the filter went on (finally). I'm not sure how exactly I removed the old filter but it wasn't easy. I thought I had it moved all the way to the right before pulling. I read not to turn it but I may have a slight bit with all the wiggling and pushing, it was very frustrating. Both the pulling off and pushing on of the filter took way to much force. I kept feeling like I was going to break it. What a terrible design. I know I am responding to an old post but maybe this will save somebody a lot of misery. 😁

[@StephenSmith-rn2lo]

Excellent video exactly on point. Love the grey vs blue hint. Very helpful. Ordering my filter now. Thanks

[@Housebarons]

Hey Stephen, Thx for watching!

[@diannemetcalf1046]

Very helpful. I almost broke my filter cartridge with the instructions that came with the GE filter. Your video showing “this is what I mean when I am referring to the filter cartridge” Thank you sooo much! Will ck out your other videos.

[@Housebarons]

Hey Dianne, Glad it helped! Thx much for watching!

[@loubino18]

Thank you, great concise warnings and info! Poor design - liked the old style fat filter - just turn on & off & less costly!!! My next Frig will take this into consideration...... HEAR THAT GE!!!! :)

[@shirleygentile15]

Excellent.... simple and efficient video. changed the filter in less than 30 seconds.

[@Housebarons]

Hey Shirley, Nice job! Thanks for watching too.

[@joannvazquez7404]

Thank you so much!!!! I was having a terrible time removing and installing. First time doing this in my new fridge.

[@Housebarons]

Hi Joann, glad this video helped! A lot of people in the comments section are having trouble installing their new filters. Glad yours worked out!

[@schatzieme2]

Thanks for the video, I had trouble getting the water to work after I installed the filter. I discovered I had put the filter in with the word back facing me. Now it works!

[@Housebarons]

Awesome Carol, so glad to hear that you got it to work!

[@wendymatthews9975]

Very helpful. Love the visual how-to and more specific instructions than were offered with the GE filter. Thanks!

[@Housebarons]

Hi Wendy, we have encountered many products, especially tools and machines, that have terrible instruction booklets. So we spend a while figuring out how to use the item and make a video, figuring other people will probably also be trying to solve the riddles. Thanks so much for your comment, glad the video was helpful!

[@virginiafletcher6173]

Thanks a bunch. Very helpful. Wish the GE manual had described the process at all, much less as clearly as you have

[@Housebarons]

Hey Virginia, Thank you and thx for watching!

[@kathryn4695]

Thank you so much for the difference between the gray and blue holder as the manual did NOT mention that very important tip. It said to twist it and that would have broken something I am certain of which would really have annoyed me. Done, in and very happy. Great video, dumb design on GE’s part.

[@Housebarons]

Hi Kathryn, we agree, it doesn't make sense that a refrigerator manufacturer would have two different filters for the same model. Some people are saying the colors don't always correlate to what we were saying. So this is very confusing. We wonder how many people have broken their filters installing them the wrong way. Very glad yours went smoothly, thanks much for your comments!

[@speedlever]

Fwiw, I changed out the original filter on my 2020 cafe fridge yesterday. I have the gray filter connection. The original filter did not want to come out so I put some muscle into it and the filter popped out. It broke one of the tabs on the filter itself. I hope the gray connector is ok. I replaced the OEM filter with the factory plug because I have a whole house water filtration system. Anyway, no apparent leaks in the system. I have to agree this is a poor design for what will surely be an owner service vs having a shop come out to change the filter.

[@cherylbutler-adams6731]

A MILLION THANK YOUS! I almost put in a service call!

[@Housebarons]

Glad you didn’t have to make the call! Thx for watching!

[@wandagolden6666]

That was so helpful! I was having so much trouble with this water filter. Details matter 🙏🏽

[@Housebarons]

Glad it was helpful!

[@frnmcnichol6755]

Followed your instructions and it worked perfectly.

[@Housebarons]

Hey Frn, Great! Thx for letting us know and thx for watching!

[@lizarichardson9224]

Great job - we were able to replace the filter with no problem. Thanks~

[@Housebarons]

Hi Liza, awesome, good for you! It always feels great to do a job yourself and not have to pay labor costs. Thanks for your comment!

[@magazinhaberleri1209]

RPWFE 2 Pack Refrigerator Water Filter Amazon www.amazon.com/gp/product/B013E8CIRC/ref=as_li_tl?ie=UTF8&camp=1789&creative=9325&creativeASIN=B013E8CIRC&linkCode=as2&tag=pdf44-20&linkId=38d3081663561855c74d5eb3122edf30

[@Vincente_Guerrero]

You made it seem more complicated it's actually extremely easy you can do it blindfolded

[@cinnamonstah7415]

Thank you for this video, I destroyed a replacement filter before I found the video :/ lol

[@Housebarons]

Hi Cinnamonstah, so happy this helped! Sounds like a lot of people are having difficulty installing their filters. Glad yours worked!

[@karenratasky5127]

After trying to swing the new filter to the left into position, it was not fully seated. When swung back to the right, the top tab broke off the filter. We removed the broken filter,. However, the “notches” at the top and bottom of the white housing are not fully exposed to accept a new filter. How do I move/rotate the white housing to the right to accept the new filter? Trying to move right with my finger and a screwdriver were unsuccessful. Thanks for your time.

[@Housebarons]

Hi Karen, without being there to see exactly what you are referring to, this is difficult to advise about. There are two kinds of filters made for this refrigerator, one inserts and the other one twists in, so you have to make sure you have the correct type for your specific model. If the tabs break off the filter, the filter is probably no longer functional and you will need to get a new one. Below is a link to the info from GE where they explain how to remove the old filter and replace it with a new one: products.geappliances.com/appliance/gea-support-search-content?contentId=21284 Hope this helps, good luck!

[@adelinabrown44]

I have changed my filter twice before and it was not as easy as in your video. I am trying to change for the third time and it will not seat at all. Any ideas?

[@connieandres2882]

Info much appreciated. When we go to get water from the new filter we still get the message that says to change the filter. We have tried touching on the message but to no avail. Suggestions please.

[@Housebarons]

Hey Connie, I’d call GE. But here is a guess. I vaguely remember removing a filter and the area where it attaches had some moisture around it so installing the new filter didn’t register. Maybe something like that??? There has to be some kind of combination of buttons or the like to do a hard reset. GE should be able to give you a solution. Thx for watching.

[@enelradredoy7007]

Thanks

[@lindaquintero8781]

Good learning video

[@Housebarons]

Thank you 🤗

[@chrishernandez7298]

Leave it to GE to make something so simple so difficult!!!!!!

[@jamieingram5926]

I'm so frustrated with still trying to install mine!! Grrrrrr

[@dnelson812]

@@jamieingram5926DITTO!!!! Hate changing this filter. Last time we hired a repair person to install it. Hopefully this time I can do it myself!

[@claudinesportelli8171]

Thank you so much....the ge manual does NOT tell you the difference between the grey and blue clip!!! Thank you!

[@Housebarons]

Hey Claudine , Thx for watching!

[@markroyce9366]

I greatly appreciate the input you provide. I have a café refrigerator from GE and I have the RPWFE water filter. I removed the old one but I’m having a very hard time getting in the new one do you have any suggestions?

[@Housebarons]

Hey Mark, Are you sure you have the correct filter? I know they make at least 2 different kinds and they can’t be swapped. Thx for watching!

[@mikekennedy7805]

Thanks very easy

[@Housebarons]

You are welcome! Thx for watching!

[@zoekitty100]

Wow! Good details. That helped!

[@Housebarons]

Glad it helped!

[@gregsewell0]

Unscrew the inside wall where everyone is taping the chip to and pull that plastic inner wall part out. Behind that plastic part is the circuit board that senses the chip. There are three wires plugged into that board, a Purple wire, a Black/Red wire, and an Orange/Gray wire. Who here knows the correct combination to splice those wires together, to bypass the chip altogether?

[@cecynay7369]

I would love an answer to this too!

[@cameodove4928]

Just successfully changed my filter thanks to your helpful video but display still says “ replace.” Please advise. Thank you 😊

[@racemiami1]

Thanks. Got it in watching your video!

[@Housebarons]

Hey racemiami1, Thx for watching!

[@rimanandi8078]

Very helpful video! Thank you! 😃

[@Housebarons]

Hi Rima, glad it was helpful, thanks for your comment!

[@arthurleino]

Replaced with new filter. No leaks, but still say to replace filter.

[@carolayers162]

I noticed you had a bit of a hard time getting he filter in. You went off camera or paused the camera and then you got it in. I can’t get my new filter in. What did you do on paused filming

[@Housebarons]

Hi Carol, on paused filming I screamed and yelled because I broke the first filter and had to go out and buy another one. Every filter I have ever replaced screws in, but this one inserts. I broke it by trying to screw it in. That is the main reason I wanted people to watch this video, so they would be sure to install their filter correctly. I don't want to be responsible for you breaking your filter, so I will just say that when I inserted my filter I had to use some force, like I do when inserting a tamper resistant plug into an outlet. It should plug right in with some effort. Hope this helps!

[@Housebarons]

There are 2 ways to install a water filter, by screwing it in or by inserting it, so a person should check their owner's manual to find the correct procedure.

[@magazinhaberleri1209]

RPWFE 2 Pack Refrigerator Water Filter Amazon www.amazon.com/gp/product/B013E8CIRC/ref=as_li_tl?ie=UTF8&camp=1789&creative=9325&creativeASIN=B013E8CIRC&linkCode=as2&tag=pdf44-20&linkId=38d3081663561855c74d5eb3122edf30

[@virginiaspeciale8641]

I’m with you. I can’t get my new filter in either.

[@natashasouliere1786]

@@Housebarons Yes, as I have learned the hard way:)

[@suze2012]

Hello, thanks for the great video. Do you happen to know how to recycle these filters?

[@Housebarons]

No, sorry. Hut thx for watching!

[@msmith4183]

I am having a hard time getting the new filter in. I think I tried to pivot the new filter in place before it was fully seated, and it popped out, leaving the pivot part way over, and I can not get it to move back, to allow me to seat the new filter properly. Any suggestions? Thanks

[@terrymofmich]

Hey Rick, Maybe you could edit this a little and stress the back of the filter has to be tilted up. The new one goes in at a slight angle. !

[@Housebarons]

Hi Terry, we moved the filter around until it fit. Didn't know the exact trick. What you are saying makes sense. Thanks, we will pass your info on. Thanks for your comment!

[@kelliowens9288]

THIS HELPED!!! thank you

[@rosieabalos8219]

Very helpful.. Thank you 🙏🏿

[@Housebarons]

Hi Rosie, glad this video was helpful, thanks for your comment!

[@thomasboyd6242]

Ok now I have to go do this! 😂

[@wiseman3911]

Thank you for the video. Do we need to turn off the water supply valve before replacing the filter?

[@rasimhaciyev1644]

Thanks a lot for the video. I need to replace the filter housing .I bought the housing already but can't find any video how to replace it . If you have any information about that please share.

[@Housebarons]

Hey Rasim, Sorry - no video on that. Thx for watching!

[@susoeresia-eke6174]

great video but when I insert the filter in p[lace, it no longer turns back into its original position. What do you think we are doing wrong

[@Housebarons]

Hi Suso, quite honestly we just kept moving the new filter around until it fit. A viewer of ours, Terry M., has this to say: the back of the filter has to be tilted up. The new one goes in at slight angle. Hope this helps. Let us know how it works out.

[@utubepunk]

Thanks but was really hoping for the RFID bypass trick.

[@Housebarons]

Hi utubepunk, this refrigerator costs a small fortune. In our opinion modifying a filter to save a few dollars isn't worth the chance that it could cause a problem with the appliance. However, if that works for you, then you have saved money, which is always a plus. Thanks for your comment.

[@utubepunk]

@@Housebarons I need to save them dollars after having spent a small fortune on my refrigerator. 😄

[@carolburnett8372]

Yes, I have one of the very expensive ones, therefore I cannot afford the filters 50.00 each.......so I need to do this asap, I sure hope I do not tear it up

[@carolburnett8372]

@@Housebarons ... please tell us, this will not hurt our fridge

[@utubepunk]

@@carolburnett8372 There's some videos online, Carol, that walk you through it.

[@rogerkarstofsky9208]

After watching your video I installed new filter, purged system and water dispenser works but precise fill is no longer working, and it also isn’t counting cups or ounces. Water pressure is good. Have the exact Cafe as you do, with the Keurig. Any help would be greatly appreciated. Thanks in advance

[@sarahcano8484]

The video was very informative and easy to follow. I have a question I am hoping you can help with. When I replaced my filter the refrigerator began to display “leak detected” warning and disabled water dispensing. I was wondering if you have ever encountered this? I have replaced the filter with other new filters, have spoken with GE over the phone to troubleshoot and have had 2 repairman here to look at it and no one has been able to help. The filter is seemingly fine. There is no actual leak and I can only guess that it has to do with the way the filter is seating however one of the repairman who came to look at it told me there are no sensors in the fitting so can’t be this? I know this is a lot of information but just hoping to find the problem so we can fix it. Thanks!

[@jeffmaloney8701]

Sarah Cano Any luck? I have the same problem!

[@Housebarons]

Hi Sarah, the following video from GE says that the filter might not be properly installed:kzbin.info/www/bejne/f3uclXuJfZKYarM If that isn't the issue, I would do a factory reset, below are the instructions to do that: How do you reset a GE Cafe Refrigerator? Press and hold all four of the temperature adjustment buttons for three seconds and then release. When "0" flashes in the displays, the refrigerator is in the self-diagnostic mode. Press "1" and then "5" to completely reset the entire system. After the system resets, unplug the refrigerator and then restore power. If that doesn't fix the problem, then I would think that you really do have a leak and instead of calling a general repairman, call a GE Authorized repair person. They will know how to diagnose and fix this problem. Hope this helps, let us know how things work out!

[@sarahcano8484]

HouseBarons hello I saw this video before I posted and I agree somehow the filter is seating or installed incorrectly however 2 repairmen and O have installed various filters “correctly” and as instructed. It appears perfect but refrigerator still thinks there is a leak?

[@sarahcano8484]

Any tricks or suggestions

[@rosemaryb9658]

Got filter out and new one in no problem but digital read still shows "Did you know" comments and "dismiss", "remind later" and "connect" wont change to allow us to run water - help?

[@pn3940]

how long does the filter last? depending on how much water go through it or how long ago it was reset?

[@Housebarons]

Hi P N, the filter is supposed to be replaced every 6 months or after 170 gallons of water filter through it.

[@natashasouliere1786]

We've gone at least a year with no problems. I can't drink the tap water in our area with my medication. I just feel bad seeing the message that it over 99 days overdue:)

[@oliviarobinson6657]

Pushed the new filter without correctly placing it and now I’m unable to pull the new filter out without breaking it! Any suggestiins

[@seanquinton5975]

What about the filter maintenance alert screen? Does it clear when filter is replaced ? Ordered my filter should be here tomorrow, so I am wondering.. thanks for any help and the video.

[@rezahoudi4915]

Where should I buy the filter and how long for replace the next one 🙏

[@Housebarons]

Hi Rezahoudi4915, Home Depot usually carries the RPWFE water filter. Replacement time depends on how much water you use. The refrigerator should signal when it needs to be replaced.

[@rezahoudi4915]

@@Housebarons thanks for your reply 🙏😀

[@louinfeld7720]

My housing is gray but it does require turning to get it out and in. It was very hard to get the filter out. I had to use a wrench in order to turn the filter counter-clockwise. Putting a new one in was even harder. I broke one filter and finally got the second filter in but I still needed a wrench to turn it clockwise. The water started working correctly. However, the message that I need a new filter is still there. Is there a way to turn this message off or does the message indicate that there still is something wrong with the installation? I spent at least an hour on this "simple" replacement.

[@ingridandrews8605]

Perfect Help!!

[@lovvee121]

Is water supposed to be grey at first ? After your replace it

[@beanncanton1430]

Very helpful, but what happens if you can't the existing filter, in a gray housing, removed? We've pulled hard and it won't budge and are afraid that something will break.

[@Housebarons]

Hey BeAnn, Be sure and call customer service rather than risk breaking something. Maybe they have a “trick”…? Thx for watching!

[@calgarycuda]

Thankyou very good

[@peggymcintire2685]

We changed the filter. But the light still says we need to replace

[@tombrackbill5269]

After replacing the water filter, how do you purge the new system of air? If you don’t have a water dispenser on the refrigerator but only an icemaker?

[@marykelly2035]

Thank you!!! I am so happy!!

[@Housebarons]

Hey Mary, Glad it helped! Thx for watching!

[@Rakeshcool348]

Thank you so much 😊

[@Housebarons]

Hey Rakesh, Thx for watching!

[@suemarley1008]

I tried to replace the filter as you did. Water did not come out of my dispenser. I do not use the dispenser often . What could be the problem.

[@bigmelbigmel4449]

great job thank you

[@Housebarons]

Hey big, Thx for watching!

[@Aureej1]

I have read that the GE cafe refrigerator is very loud, do you have the same issue? Can you comment on the quality and experience so far?

[@Housebarons]

Hi Areej, no, we have not found the GE Cafe refrigerator to be loud at all. Actually, very quiet, not sure why people are saying it is loud. We will be doing a video review of this exact refrigerator soon. Cons: The icemaker gets stuck if you don't use it a lot. Sometimes the button for the crushed ice gets stuck. We got a counter depth fridge, it doesn't hold a large amount of items. They might have a larger version of this refrigerator. Pros: The counter depth looks slick because it aligns with everything in the kitchen. Provides both cold and hot water. Has a very nice display to show how many ounces of water it dispenses. Has cool blue light display. This refrigerator is definitely upscale. Top tier refrigerators can go for $7,000 or more. This one is less than half the cost, so for us it is a good value. Hope this helps, good luck with your purchase!

[@Aureej1]

HouseBarons thank you for your feedback... I really like the cafe line and wanted to start getting my entire kitchen... dishwasher had great reviews but the refrigerator was all over the place... looking forward to your video on the refrigerator. If you can answer below questions as part of the video that would be helpful to everyone trying to purchase this appliance. How long you had the refrigerator? Mention about the sound. How long it takes for the water to get hot. The measurements and model you have on hand. Storage issues, if any? Freezer quality. Any water leakage? Thank you!

[@marymadden9488]

I've changed the filter as instructed, however the filter maintenance alert is still on and water will not dispense. I've tried holding down the water and ice buttons as indicated in other searches with no luck.

[@Housebarons]

Hi Mary, it is very frustrating when you take the time to do a DIY project and it doesn't quite go smoothly. Here are some things to try. Unplug the refrigerator and then plug it back in, maybe it will reset. The water filter warning light or message is reset by pressing the Ice & Water pad on the control panel for three seconds. The filter light should turn green, and the filter status will show Good. Evidently this is pretty temperamental. If you hold it too long, it won't work. When the filter or bypass is correctly installed, the word "FRONT" will be showing. If "BACK" is showing, then reverse the filter or bypass and reinstall. Also, the air has to be purged from the line after the filter is changed. They want you to dispense water about 5 minutes. If none of this works, you may have to either install another filter or call a technician. Hope this helps, good luck!

[@natashasouliere1786]

It is also possible you broke it like I did:)

[@lilixi6295]

@@Housebarons HI, after i intalled it , the water poped out correctly.. But i didnt run for 5 mins and now now water out.. how to fix it?

[@Santosho5]

I have the same refrigerator.

[@geraldboardman2588]

If you twisted, all hope may not be lost. Unplug and the replug the fridge, take out the filter, make sure that the "FRONT" lable is visible and push in. Good luck!

[@Housebarons]

Hey Gerald, Thx for the input and for watching!

[@vivek4348]

Hi Dave. Thanks for the awesome video. Is there any way we can disable the cooling of the water from the filter. I want room temperature water when I dispense.. not cold water.

[@aneesashears]

you have to do that through the actual fridge the filter doesn’t affect that

[@debhughes7947]

I managed to twist and broke the old filters’ small tab. Of course now I can’t install the new one. Recommendations? I have the grey housing. Thanks

[@Housebarons]

Hi Deb, do you mean that part of the old filter tab is lodged in the refrigerator, or that you broke the tab on the new filter?

[@debhughes7947]

@@Housebarons The old filter tab was lodged BUT a savior neighbor was able to recover/reinstall new filter. Thanks!

[@natashasouliere1786]

@@debhughes7947 I need a savior neighbor! How did they recover/reinstall?

[@BlackSuccessPod]

So I have an issue. I replace the filter but still getting a notification that it’s overdue on the panel. How can I reset the panel on the outside?

[@Housebarons]

Hi BlackSuccessPod, we have had success resetting the GE Cafe refrigerator by unplugging it for a minute or so and then plugging it back in -- hope this helps!

[@brucethomas1602]

My frig has a gray mechanism. I followed directions to remove and insert the filters. But, when I swung the new filter into place I discovered that I apparently did not insert the new filter firmly in place. So, I removed the filter but the "seat" (my term) mechanism is locked in place as if there is a filter in place. I can't insert the filter while the seat is locked in place and the mechanism won't swing back out to allow me to attempt to insert the new filter more securely. Ideas on how to get the seat to swing back out?

[@Housebarons]

I’d want to know if that “seat “ spins in place or snaps in place ?? May have to call GE and get them to explain why it would be locked immovable in place.. there has to be a literal catch somewhere….

[@brucethomas1602]

@@Housebarons Thanks for the reply. I stumbled across a simple solution. I was the problem. I wasn't swinging the cover back far enough to allow the seat to turn. When I fully extended the cover I was able to get the seat to rotate by placing a wooden spoon into the seat and moving as if the spoon was the filter. My bad!

[@melodyjohnson1505]

I set my new filter down on the counter next to the old one and lost track of which one is old and which is new. Dumb, I know, but is there a way to tell which is used? Neither filter seems to rest the expired indicator on the touch acreen panel but one is heavier than the other so I’m hoping that’s a clue???

[@Housebarons]

Hey Melody, I would GUESS heavier is older. Maybe shake it - the opening facing the countertop?? Any drops of water come out? Try the other one… not sure if they water test them at the factory. If any water comes out of one and not the other - I’d guess the one with water is old. Hope that grips! Thx for wstching’

[@melodyjohnson1505]

@@Housebarons - thank you for the quick response!! And you were right. :)

[@melodyjohnson1505]

One additional thing I found helpful when removing, inserting, or swinging the apparatus open or closed is to lift up slightly on the end of the filter toward me. Much less resistance that way and it feels less like you’re breaking something. 🙂

[@JulietteFKerr]

I accidentally made the white receiver twist to the left too far, now I can’t fit it in. Any solution for moving the white receiver over to the right?

[@rick3300]

Put the handle of a wooden spoon in the hole in the white part and and push it left or right move it where you need to.

[@annmarie443]

Just to be clear if the gray on the inside connection of the fridge don't twist, not the blue on the replacement filter. I twisted and broke it.

[@annmarie443]

I think it will be okay though

[@Housebarons]

Hi Ann, in this video, the refrigerator that we are working on has a gray water filter housing. This type of filter will be removed by pulling it straight out, not twisting. Hope your replacement works out!

[@michaelcurl9817]

Can a old filter cause the ice maker to stop working? My filter hasn't been changed in 2 years.

[@debrajohnson6395]

How often does the filter need to be replaced? I have a Keurig coffee maker that needs decaying quite often. How will I address that issue with the refrigerator?

[@Housebarons]

Hi Debra, GE says the filter needs to be replaced every 6 months, or after dispensing 170 gallons of water. Your refrigerator should give you a notification when you need to replace the filter. Hope this helps!

[@debrajohnson6395]

@@Housebarons thanks❣

[@warwompit]

I replaced a filter with no problem, but when the dispenser stops there is a harsh thud or click. Any idea what that is? It happens every time I use the dispenser. Water and ice come out fine, but when the water stops it always stops with a thud coming from the upper left of the fridge. Have tried reducing the flow from the wall to the fridge and no difference.

[@Housebarons]

Hi Chris, sorry, we have not encountered this problem, so we can't advise on how to proceed. Hope you figure this out!

[@maryjackson353]

Hello. I had trouble removing the filter and now I cannot get the new filter installed. After watching your video, I think I didn’t swing the old filter out enough to be able to pull out easily. BTW, my holder is gray. I think my problem is the holder did not swing all the way out to be able to remove easy. Now, it’s not in the right position to easily insert and swing back into the correct position. Is there any help you can offer me at this point? I had 3 rotator cuff surgeries on that arm and I am in pain from my efforts. Thanks so much.

[@kelliowens9288]

same issue here. I can't get it to swing back

[@carolburnett8372]

I must be playing this at the same time in two different places.......double sounds a few seconds off....wow

[@Kashscooking]

hello, very useful video, but I have a GE profile french door, I just replaced this filter but I keep getting red alert that - FILTER REPLACEMENT in 5 days .....that means I did it wrong? Your help will be appreciated . Thank you.

[@Housebarons]

Hey Kash, See if this helps: After you change the filter, the RESET WATER FILTER must be pressed and held until the red light goes off. On some models, the light goes out, and others will turn green; either is considered normal. If you do not hold the pad in, the red light will stay on. Also, if you hold the pad in for a long period of time, the light will go off and then come back on. If this does not turn the red light off, having it checked by a service technician is recommended. Thx for viewing!

[@kelliowens9288]

I can't get it to swing back. I have tried multiple times

[@aldoh9035]

Question for you , what if for some reason the locking system that holds the filter is jamed and sits straight, is there any release key to fix this issure Thank you!

[@Housebarons]

Hey @aldoh9035 , check and make sure you have the correct filter. They make a couple DIFFERENT kinds. Thx for watching!

[@deejayleo510]

I replaced my filter and now water barely runs through before dripping and stopping completely. And it now makes a loud rumbling noise. I thought it was just an air bubble but it's been two days now! What can I do?

[@Housebarons]

Hey Brandon …, Sure sounds like sir to me. I’d call manufacturer. I’m just not sure.

[@natashasouliere1786]

I made the mistake of twisting the cartridge and I have the grey one. I have had this fridge for five years and love it. I am pretty handy and have fixed a few appliances around the house. It won't sense anything and the old filter doesn't work so I'm pretty sure I broke it. Any tips on fixing or replacing the part?

[@Housebarons]

Hey Natasha, Compare old filter to new one. Maybe call the manufacturer for help? Thx for watching!

[@MurielLanier]

cant seem to get the filter out

[@nareshseebalack8904]

My fridge is not dispensing ice or water from the dispenser dont know if my water filter needs changing

[@philtraywick]

The water obviously needs to be turned off before replacing the filter, correct?

[@Housebarons]

Hi Phil, we have not turned the water off to replace the filter and it has been fine. Good luck!

[@philtraywick]

HouseBarons Yeah, changed it easily without turning water off. No issues, took about 30 seconds. 😊

[@natashasouliere1786]

I have never turned the water off and have successfully replaced this cartridge.

[@tomjunck6563]

How do I reset the system after I install new filter?

[@joshdznyc]

Quick question: How long before you can drink the water because it’s blue at first

[@Housebarons]

Hi Josh, you have to run the water for about 5 minutes. After that you should be fine to drink the water. Here are notes from GE: Run 2 gallons of water through the cold water dispenser (about 5 minutes) to remove air from the system. A newly installed filter cartridge will cause water to spurt from the dispenser. Use a large pitcher or sports bottle to catch the water spray. NOTE: It is normal for water to appear discolored during the initial system flush. Water color will return to normal after the first few minutes of dispensing. Hope this helps!

[@joshdznyc]

@@Housebarons I also have the cheap version of that fridge without the LCD display

[@mollyjansen3820]

My filter will not fully Seat o the hole. I have a grey one. I already broke one🥴

[@Housebarons]

Hi Molly, just to be clear, when you say you have a grey one, you mean you purchased a grey RPWFE water filter, and the housing where it inserts in your refrigerator is also grey, correct? If so, all should go well, but it is a bit tricky to insert. You have to make sure the word "front" is on the front side of the filter when you insert it. Also, you will not twist the filter, just insert it into the housing. Line up the clips on the front of the filter with the slots in the housing. You could take a picture of the housing and blow it up so you can see exactly how you need to put it. Then maneuver it until the new filter seats correctly in the housing. Hope this helps, let us know how it works out. Good luck!

[@marypayne4752]

How do you replace a XWFE filter in a ge fridge?

[@laurawes101]

Replaced filter just as you did the display keeps saying replace filter and water does not work at all

[@Housebarons]

Hey Laura, Obviously, something isn’t right? Double check and make sure you have the exact right filter - I think they have different kinds and aren’t all comparable. Thx for watching!

[@ahsanhabib6717]

Hi: I replaced my filter following your instruction. The water that came out first looked light greenish/grayish. Can you please explain the reason? Is it safe to drink the water when it becomes clear? Thank you for your answer. Ahsan Habib

[@edscottaz]

GE recommends running 2 gallons thru the new filter before drinking the water.

[@barbaravollaro5681]

8pm. I twisted the filter on a grey housing and now I can't get a filter to line up. ?

[@Housebarons]

Hey @barbaravollaro5681, Double check the filter type. I know they make a couple different kinds which is confusing. Maybe call customer service...gotta be something simple...hopefully. Thx for watching!

[@carlaburgess5063]

hi my filter is inside the door. I can't get it back in, What am I doing wrong

[@Housebarons]

Hey Carla, See if you can get the old one back in. Are they exactly the same size in every way? If the old one won’t go in - which was already in, then something is in the way. If the old one does go back in then you may have a sizing issue. I’ve heard there are a couple of designs - they don’t make it easy. Hope that helps

[@nancyl.johnson225]

I had black stuff come out when I replaced it at first

[@Housebarons]

Hey Nancy, That may be charcoal from the filter?? ( if that’s what they use to filter) Thx for watching!

[@Robdpd]

How many times did you edit the times you took to put it back in. This isn’t working at all.

[@Housebarons]

Hey Rob, Lol!!!! We totally get it. Don’t know why they make it so hard. Make sure you have the right filter. They make multiple kinds! Thx for watching!

[@markluera4347]

Thanks!!!

[@Housebarons]

Hi Mark, certainly, hope you were able to replace your GE Cafe filter!

[@markluera4347]

I was, thanks to the video worked out easy