Extremely Amazing Manufacturing Production Process Of Powerful Expeller Machines | part 1

[@HansFormerlyTraffer]

Every boy of 10 years should have to watch these videos and have someone explain the process to them. This is better than school.

[@mimechanics1019]

Thank you for your opinion ❤️👍

[@markb5803]

Two things you will never sell in Pakistan, PPE and workbenches.

[@mimechanics1019]

What is ppe ? Did you explain if you don’t mind ❤️👍

[@markb5803]

@@mimechanics1019 Personal Protective Equipment

[@wazzazone]

Personal Protective Equipment. Safety gear and apparel.

[@PedroPereira-jl3pi]

yes, it does not come in kids sizes.

[@Ilovegold]

Just some regular shoes would be nice

[@ВикторКурлов-ф8к]

Босоногий ВЕРТУОЗ ( с современным инструментом был бы СПЕЦИАЛИСТ ) спасибо Петру 1 что оставил вам кое что из инструмента

[@mimechanics1019]

Thanks for watching ❤️👍

[@Bighead-ut6sf]

Ядерная держава - Пакистан! На Вы, и шопотом.

[@horstmuller7512]

Good job! Yes, all tolerances are guaranteed less than 2 fingers.

[@mimechanics1019]

Thanks for watching and your support 👍❤️

[@petermoto409]

@@mimechanics1019 They re not supporting, they are making fun. This shit is comical.

[@mimechanics1019]

I understand peter thank you for your help ❤️

[@Sarge084]

Made mainly from the hull plates of the ships they run up onto the beaches for dismantling, you can still see the barnacles on them!

[@mimechanics1019]

You’re right 💯

[@masterQ20]

*Excellent man, thank you for sharing your work, God bless you*

[@mimechanics1019]

Thank you so much ❤️👍

[@mrMacGoover]

Yeah... closing your eyes just before striking an arc doesn't help that much, the ultra violet light still passes through your eye lids.

[@mimechanics1019]

Yes you are right 👍

[@alro2434]

Thanks! Getting the most out of everything available to the max: metal, machines, people, and design. That said, the shaper's clapper box is really getting a workout and never seen a welding cable with so many band-aids.

[@mimechanics1019]

Thanks for sharing your experience and thoughts 💭 on this stay safe and stay healthy ❤️👍

[@premiumcichlidfarm2201]

What is amazing. They are working with Stonehenge technology.

[@mimechanics1019]

Thanks for your kind information ❤️

[@shanejohanson1638]

I still can't tell. Is it machismo or laziness. Would it kill you to grind the torch cut pieces before the fit up? Those terrible welds would be quite a bit better with only 10 minutes more prep. These guys couldn't weld themselves out of a paper bag. Take some pride in your work man.

[@mimechanics1019]

Thanks for sharing your thoughts and experiences ❤️

[@christianvalenzuela225]

What skilled worker!😊 a treasure for his workshop....

[@mimechanics1019]

Thanks for appreciate ❤️

[@libertyman3729]

They all wear thoes safty flip-flops, Bless there hearts .

[@mimechanics1019]

Thanks for watching and sharing your thoughts ❤️

[@chakravarthyc2603]

Good workmanship. keep it up.

[@mimechanics1019]

Thank you so much ❤️

[@potterteksmith7548]

Hope they have a comprehensive workers compensation policy...

[@mimechanics1019]

Yes I personally visit there owners of this factory he is very good and compassion 👍❤️

[@potterteksmith7548]

@mimechanics1019 The workers are obviously highly skilled but it's the conditions they work in that would get the factory shut down immediately in this country. Safety being the major issue like handling molten metal with no protective clothing (even bare feet or open sandals!)

[@JOSEF7011]

20:00 The gentleman is very skilled. He would be better off working with a quality gauge. In this way, one only worries whether it will work out by the 2-3 hundredths of a mm or not. The Lord really can.

[@mimechanics1019]

Yeah you’re right sir thanks for your comment appreciate as well ❤️

[@williamcarter9380]

Without the proper work conditions, just wow.🎉🎉🎉

[@mimechanics1019]

We agree!

[@williampihahuna195]

Je suis admiratif de voir ces ouvriers travailler à même le sol, le confort de ces personnes n'est pas le cadet des soucis de la direction, ,je ne passerais pas ma journée accroupi ,il me faut absolument un établi, c'est la moindre des choses. les patrons ont de la chance d'avoir d'excellent ouvriers à leurs dispositions. Les tourneurs, les soudeurs, les jeunes apprentis bref les patrons ont de la main d'oeuvre à profusion a leur disposition merci quand même pour la très bonne vidéo ,que Dieu vous préserve des accidents

[@mimechanics1019]

@williampihahuna195 thank you so much for appreciating us im also a machinist in these shops I understand how this is difficult for you to spend some time here thanks a lot for appreciate us❤️👍

[@annechristiansen941]

good job guys.👍🤗👍🇸🇯

[@mimechanics1019]

Thank you so much 👍❤️

[@china-trip]

My best friend, Excellent video! Keep it up! I had to see the full video, as always, Keep it up! +thumb up3!

[@mimechanics1019]

Thank you so much my best viewer thank you for your support and appreciate always ❤️

[@matthewbolding5538]

It still amazes me how they are able to work like that in a pair of sandals and no gloves on!

[@mimechanics1019]

@matthewbolding5538 thank you so much sir for your appreciated response stay tuned for the second and complete part on Sunday ❤️

[@albinklein7680]

Those bone dry spindles and bearings on that roller bender make me sad. It absolutely amazes me that those people have machines that cost an absolute fortune in their country and treat them that bad.

[@mimechanics1019]

Thanks for sharing your thoughts and opinions stay safe and tuned ❤️👍

[@pekpks7347]

Beautiful welding in an unfavorable and dangerous environment

[@mimechanics1019]

Thanks for watching

[@phils4634]

They weld far better than I can, with all the "Western Goodies". Mind you, I'm not a Welder by trade (by any means), nevertheless . . . . .

[@dimitarangelov5758]

Голяма работа сте желая ви здраве поздрави от България

[@mimechanics1019]

Thank you so much for your kind and appreciated words i wish you healthy and happy greetings from pakistan❤️

[@carlosrodriguez2001]

Saludos desde México, excelente trabajo pero... Las condiciones de trabajo son muy malas, sin un buen lugar de trabajo, ni las condiciones adecuadas, ni el equipo personal de seguridad. Saludos 🤟🤟

[@mimechanics1019]

Thank you so much ❤️

[@xarkava9648]

Το highlights που αναβη και σβήνη συνεχως, είναι πάρα πολύ ενοχλητικό

[@mimechanics1019]

Ok

[@rocketman13f51]

How their eyes don’t get flash burns from the arc welder is a mystery. I got it once while watching my father weld a broken part. Of course I was told not to watch but of course as ten year old I ignored that. Amazingly my mother new how to fix my pain. She chopped up a raw potato into mush and then had me lay on my back.she put the mush on both of my closed eyes and within 30 minutes the pain was gone. I guess it was some kind of a chemical reaction with the potato juice on the skin of my eye lids and my actual eye balls!

[@mimechanics1019]

Ooh i agree with you because i am also suffer with this case because i am also a welder or machinist till now its my own channel you are right on this topic why they didn’t have safety equipments as they needed because of ownership they just want more money in few resources and never wanna lose money on these little issues only God can help them thank you so much for sharing your experience and thoughts very we’ll appreciate ❤️ stay tuned please

[@pennyturner8293]

Rust prevention and lick of paint on machinery would make things better including oil or grease

[@ivantaurua6735]

Asians are very skilled creative inventions in the steel fabrication industrial field they can replicate anything of enormous scale with relative ease like a precision machine product line in double time there seems to be no quality control whatsoever during each phase of development who am I to judge at their qualifications or capabilities still my view of this video is one of wonder and fascination 😊😊😊

[@mimechanics1019]

Thank you so much for your kind comment please stay well and tuned❤️

[@andyp9131]

No health and safety at all no boots no gourds on the machines no welding masks accidents waiting to happen if this was in the uk the company would shut down closed and fined. Omg

[@mimechanics1019]

Agree with you but some reasons behind this 👍

[@davidbryant5881]

They should be paid alot more than they get for the work they do

[@leandersmith6184]

Yeah you're right but willing to pay a bit more for those items, is another question.

[@JoseLuis-ob8bn]

Chapas de acero mabal , son de una caludad superior saludos desde Argentina Bahia Blanca 👍👍👍👍🇦🇷🇦🇷🇦🇷🇦🇷

[@mimechanics1019]

Thank you so much for your appreciations 👍❤️

[@JoseLuis-ob8bn]

@@mimechanics1019 👍👍👍👍🇦🇷🇦🇷🇦🇷

[@mimechanics1019]

@@JoseLuis-ob8bn stay healthy and tuned for more videos thank you so much 😊👍❤️

[@anthonyallwood593]

Very nice work much respect for you guys.

[@mimechanics1019]

Thank you so much sir❤️

[@treeguyable]

Always bend your welding rod, so you don't have to move your hand an inch😅.

[@mimechanics1019]

Great point!❤️👍

[@StephenHowton]

No safety boots or other personal protection equipment; working on machines with no guards to protect against injury; floors dangerously littered and many more safety hazards; risk of severe eye damage or blindness when welding with no eye protection. Whilst I understand the workers' need to support themselves and their families, I cannot countenance their employers' disgusting avarice.

[@mimechanics1019]

Thanks for your opinion and stay tuned please ❤️

[@mhamedalia4919]

Très belle finition merci

[@mimechanics1019]

Thank you so much

[@anthonygregory3022]

Sit down job are always the best

[@mimechanics1019]

Yeah you are correct 👍

[@richardchaney7473]

I noticed they never steam clean and/or use phosphoric acid on the metal before they prime (when they prime) and paint. I bet this stuff rusts like crazy.

[@mimechanics1019]

Agree

[@Jack-Fleming]

Can you explain the crack ? About at minute 18.

[@mimechanics1019]

That is not a crack that is tourch cutting mark on the ship scrap plate

[@65gtotrips]

What’s an ‘expeller machine’ ?

[@mimechanics1019]

Its making oil from natural seeds in this machine pressing the seeds for oil extraction ❤️

[@65gtotrips]

@@mimechanics1019 Ah…Thanks !

[@Sarge084]

I think extrusion machine might be a better description!

[@BrahimGourid]

J’ai jamais compris pourquoi vous travailler toujours par terre et pas sur un marbre qui serait plus confortable

[@mimechanics1019]

Because they use sledgehammers that’s why if they use on marble than you better know what happens ❤️👍

[@slimslaam560]

Why they did not use casting then machining instaed of welding all these parts together

[@mimechanics1019]

Because in this machine after long time use they could be open and repair again and again thats why thy using welding and folding system ❤️👍

[@manuterae9377]

Estos trabajadores cuanto tiempo alcanzan a vivir. Teniendo ese ambiente insalubre de trabajo y falta de reglas de seguridad y equipos de vestimenta de protección?😮

[@mimechanics1019]

Don’t worry they addicted work like that from beginning 👍

[@libertyman3729]

There is no retirement age in third world countries.

[@apakansaja8505]

*They know how to build the machine. They shud engage a University engineering student to build a machine that will automate the process. That shud be the next step. Automate every single components.*

[@mimechanics1019]

Thanks for watching and sharing your thoughts on this please stay tuned and stay safe and healthy greetings from us❤️👌

[@donaldhollingsworth3875]

There is nothing about safety & precession in these 3rd world countries. I can not fathom how they make the parts that they do. I just hope that these parts do not end up in the USA!

[@mimechanics1019]

Thanks for sharing your thoughts ❤️

[@javedhassan555]

The so called first world is a looters brigade

[@helsonjonathan]

Doesn't matter what you think this machine it's going to work

[@mimechanics1019]

Thank you for your support ❤️

[@chechnya]

​@@javedhassan555 So you're telling me Pakistan is a third world country?

[@ШавхалШавхалов-х3б]

В индии придумали новую професию токарь фрезировщик сварщик грузчик😂😅😢

[@mimechanics1019]

Thanks for your comment on this 👍

[@larryperdue508]

Would like to see 👀 the machine work to see what it does

[@mimechanics1019]

Yes i will show you complete process in 2nd & last part I hope you enjoy and thank you so much sir for appreciate 👍❤️

[@BalbirSingh-co3zb]

Thank you for our message reply iam so setcifid 🙏🙏🇮🇳

[@mimechanics1019]

You’re welcome 😇

[@KM-vc2yp]

Expeller machine?

[@mimechanics1019]

Yes it is a expeller machine

[@elektrical]

super , bravo

[@mimechanics1019]

Thank you so much ❤️👍

[@baldyoldfart5828]

Grease your machines people... it only takes minutes

[@mimechanics1019]

You are absolutely correct about this problem 👍❤️

[@mimechanics1019]

Thank you sir 👍❤️

[@petermoto409]

They do. They lubricate them with the oil soaked dirt that they throw all the freshly machined parts on.

[@Игорь-м6п8ы]

Молодец мужик .... на нашего Буншу похож ...

[@mimechanics1019]

Thanks for watching ❤️👍

[@roberthallas6964]

Good job ❤

[@mimechanics1019]

Thank you very much!❤️

[@swamisamarthchari932]

Very clean planned work by all . God bless you all dear. Love from India 🇮🇳 Goa..

[@mimechanics1019]

Thank you so much for appreciate us please stay tuned and also love from pakistan 🇵🇰 rawalpindi

[@petermoto409]

"Clean"???? Are you fucking serious??

[@garytelling397]

nice old school machining technique on the horizontal borer👍

[@mimechanics1019]

Thanks 👍

[@IsrarAhmed-p5t]

Wah

[@mimechanics1019]

Thank you ❤️

[@BalbirSingh-co3zb]

Paaji what is the size of oil mill round body 4 Bolt 🔩 or 6 Bolt 🔩 thank you good job ❤ love from East Punjab Kalanaur 🇮🇳🙏🙏

[@mimechanics1019]

Paaji love you greetings from north punjab from pakistan 🇵🇰❤️🥰🥰😘😘😘

[@mimechanics1019]

I don’t know exactly what is size of this machine i just make videos from different places and shops please never mind ❤️

[@pierpalumbo415]

...digo que a tecnica destes individuos, de permanecerem durante longos periodos, sentados no chão é algo a ser estudado melhor pelos cientistas da casa branca... a pergunta que fica é... quem pintou a casa branca??

[@mimechanics1019]

I don’t understand what you want to say sir but thanks for watching ❤️

[@KM-vc2yp]

Smoke some more crack

[@wazzazone]

Factory???

[@mimechanics1019]

Yes

[@PersMachinist]

Nice work

[@mimechanics1019]

Thank you so much sir 👍❤️

[@АРТЁМ101-м4х]

па пожарной АЦ УРАЛ, стоит ПН заказ made in India 👍

[@mimechanics1019]

Thanks for your information ❤️

[@warrior4christ777]

More bush league than precision Machining

[@mimechanics1019]

Thanks for your important words stay tuned please ❤️

[@usmanyousaf6834]

Good job bhai jann

[@mimechanics1019]

Thank you so much ❤️

[@assaneseye3199]

اللهم أنصردينك على سا ئرالأديانفي الحال ياربي وقدرقلةفي ةتابنا تلكريم إن تلدين عنك هوالإسلام أوكماقلتم وقدصدقت يامولانا كعادتك

[@mimechanics1019]

Ameen

[@warrior4christ777]

Save it infidel

[@grahammaloney3984]

goggles please

[@mimechanics1019]

Thank you so much sir also for good suggestions 👍❤️

[@podgee7507]

it.s maybe "Extremely Amazing Manufacturing" in this backwound country, but other country, this would be class as stone-age

[@mimechanics1019]

Yes you are right sir kindling please tell me where you from😊

[@podgee7507]

@@mimechanics1019 Australia

[@mimechanics1019]

Thank you so much ❤️👍

[@petermoto409]

Every weld is absolute garbage. How does anything stay together?

[@mimechanics1019]

They have to work with which facilities they available they are so happy with there work and make there families happy and save because they are addicted to work with these facilities and equipments

[@oxboustrophe1392]

Note the jigs and clamps used? None. Perhaps what you thought were welds were tacks. The process they use is: Build a template. Tack to the template. Align and tack with fixtures. Weld up parts. Remove fixtures and grind down tack welds. Only saw the weld up of one or two sides. Only one clamp that I saw and it was tacked on. Are you sure you saw any through welding or final welds? I thought the methodology was ingenious and efficient. May try it myself.

[@АРТЁМ101-м4х]

заЙцЫ это не пРо нИх.....😁

[@mimechanics1019]

Than what about that?

[@alfrescabanilla2504]

advance technology

[@mimechanics1019]

Thank you sir 👍❤️

[@thykoodamoilmill.churchroa9833]

Are you manufacturers ?? Give number

[@amvedin]

The pathetic working method from templates. No wonder Pakistan is in the stone age. What happened to the finished machine. Lost interest?

[@mimechanics1019]

Please don’t do hate speech

[@Чертёнок13-й7б]

Пакистан имеет ядерное оружие, это не каменный век, это выше многие стран мира.

[@mimechanics1019]

@@Чертёнок13-й7б Thank you so much sir for supporting us ❤️🇵🇰 greetings from pakistan ❤️

[@umanarayana4205]

​@@Чертёнок13-й7б they have only that no studies no modern tech

[@cuttersgoose]

The simplest way to build something is the best way....old school, made by hand products a are better than the crap plastic dog doo from China.

[@АРТЁМ101-м4х]

и,🤔,i🤔,???

[@mimechanics1019]

I don’t know what you want to explain ❤️

[@Wowmechanics1]

Absolutely awesome ❤❤❤ By Wow Mechanics1

[@mimechanics1019]

Thank you! Cheers!

[@julioacosta5592]

Skilled and SMART

[@mimechanics1019]

Thank you so much ❤️

[@АлексейфЕДОТОВ-о8ф]

молодцы

[@mimechanics1019]

Thank you so much ❤️

[@Wowmechanics1]

Nicely by Wow Mechanic1

[@mimechanics1019]

Thanks