Rare Whiskey Hip Flask Restoration - World War II

Restoration of a rare whiskey hip flask from World War 2 - The hip flask has 2 bullet holes and is probably from the World War 2 and belonged to a soldier from RAF Royal Air Force. The Flask was found near the battlefields of Reims in France by a metal detector guy who is subscribed to my channel.
About the whiskey hip flask
I got this rare whiskey hip flask from a French subscriber who do metal detecting around all the old battlefields from World War 1 and 2 in France, Belgium and Holland. Its most likely from World War 2 considering the location where it was found near Reims and all the other relics it was found together with like ammunition, coins and kitchen equipment with US and British stamps.
There was a very cool RAF badge (The British Royal Air Force) attached to the whiskey hip and the flask has a simple but yet cool eagle (I think) and the words “Per Ardua Surgo” which means Through difficulties I arise. There were also 2 bullet holes on both sides.
The hip flask was in very poor condition when I started the restoration. And there were still a lot of dents, marks and signs of use when I was finished with the repair. The brand name was still readable “Hutton. Sheffield - 0322 - 2” in the bottom.
It is made of pewter and the RAF Royal Air Force badge was made of brass both known to last thousands of years buried.
The restoration process
I started the restoration process by removing the thick layer of dirt, dust and corrosion with a semi soft vinyl brush. Then I removed the RAF Badge gently using heat.
I had a little difficulty removing the screw cap but finally after many hours of work I managed to carefully get it off.
I washed the flask in regular water with alcohol and carefully straightened out a few dents with a special tool I’ve made to do this repair.
I cleaned and straightened out the bullet holes and then I casted new pewter into the bullet holes to make the whiskey hip flask whole and usable again.
After the casting process I grinded and removed the excess material but unfortunately the old pewter was rotten and collapsed into an even bigger hole.
So I was forced to do a new repair and cast pewter into an even bigger hole now. This repair did go very well though, so after a few hours of grinding the flask was whole.
I gave the flask a quick polish (not too much) I wanted to keep the patina from WWII so therefore I left a lot of dents, marks and scratches. I also cleaned the inside with 2000 miniature metal balls. I attached the RAF - The British Royal Air Force badge and filled it with whiskey.
I really loved this restoration and the video turned out to be very good. Please subscribe if you want to see more cool upcoming projects 🙂 And DON’T FORGET TO SEE some of my other World War restoration: • WORLD WAR RESTORATIONS
Thanks for watching my channel. See you soon.
Best wishes and stay safe ❤ Martin.

[@AwesomeRestorations]

In this video i restore a rare whiskey hip flask from World War 2 - please see video description for more info - Enjoy :) SEE all my other World War restoration 👉kzbin.info/aero/PLQTERokpOFqgwUszTf7CBnRvNNrp3TDYm👈 Thanks for watching my channel. See you soon. Best wishes and stay safe ❤ Martin.

[@RaxaPKXD]

My first thought, keeping the holes by soldering in pipes! 😁👍

[@CL-we8tn]

That definitely was an awesome restoration.

[@thomassykowski9455]

durch harte Dinge stehe ich auf= per ardua surgo👍

[@thesquirrelchroniclesakare7808]

I was thinking that if you had repaired the holes with clear epoxy resin they would still have the cool factor !

[@IR-nq4qv]

@@RaxaPKXD That would have been one good way to go. With all that lead, it's probably not healthy to drink from it. Me personally, I would have just left the holes cleaned it up and presented the flask as a history and conversation piece.

[@derandere4965]

It is a Royal Air Force cap badge, hence the letters „RAF“. It was worn with the beret, usually by NCOs. The badge shows the „King‘s Crown“ indicating it was produced between 1919 and 1952, as the RAF was not formed until 1918. So basically it is very likely the badge dates back to WW II. From 1952 (?) onwards the cap would show the „Queen‘s Crown“, which everyone will understand. 😊 The seagull is the RAF‘s official heraldic symbol, the Royal Seagull of the Empire. 😂 The writing „PER ARDUA SURGO“ (I rise through hard (times)) is 45 Squadron‘s motto, a British unit of tactical bomber planes. This is a bit strange as during WW II 45 Squadron was deployed in Africa and Asia, but never in France. It took part in WW I though. This, however, does not explain how the flask got to France as the cap badge was not produced before 1919. Hm. Maybe my research yielded the wrong results.

[@galaktikvapay77]

Thanks!!

[@kusokk]

I found the same results as you, and asked my husband who is a history nerd, and he said that this was correkt. But perhaps this one ended up in france because a son had taken his fathers flask with him, as a memento? I think thats plausible.

[@Idle_Hands]

@@kusokk That's my thinking.

[@sthenzel]

It may also be, that one serviceman changed units, as after the axis left Africa, there was not that much need for bombers there.

[@derandere4965]

@@sthenzel, and way before the Axis left Africa the Squadron did. But of course, you may be right.

[@Canned_Beef]

RAF is the Royal Air Force. The badge is from WWI. Could’ve been a family item that a soldier put on their flask.

[@benedictoneill6369]

During the first world war wasn't it the royal flying corps?

[@derandere4965]

The badge cannot be from WW I. Production of this specific badge did not start before 1919.

[@circattle]

@@benedictoneill6369Yes. The RFC or “the 15 minuters” for the Blackadder IV fans.

[@Poorselipitanov]

Also the motto on the back is "per ardua surgo", in English "I rise through difficult things". However, the official RAF motto is "per ardua ad astra" which means "towards the stards". I did some research and found out that this is the Number 45 Squadron's of the Royal Air Force motto. It's their badge which motto is different. They fought in Italy and in North Africa, so perhaps it was found somewhere around here.

[@danceswithaardvarks3284]

Great job. I liked that you fixed the bullet holes because it was an interesting process, but it did lose the coolness factor of having bullet holes.

[@Skybaby79]

[[[ Ghost taps him on the shoulder ]]] "Been looking for that, cheers mate!"

[@danceswithaardvarks3284]

hahaha

[@nancymills1884]

True, the bullet holes told the story of events.

[@NotFranksPlanet]

I kept watching hoping the holes would be filled with a different metal - like a brass or something - to keep it's history. The restore is still great and I like that he kept a lot of the wear - it honors whoever dropped it.

[@Hailon]

Don't worry, they were not even real bullet holes anyway. Clearly drilled for theatrical reasons, but still a nice job of the repair...

[@junis-7445]

good job! But The two gun holes should be kept and lined inside, so as to preserve the historical information of the item and restore its function.

[@HivisoftheScale]

I don't know why, but I've always liked the "squeak squeak pop" sound effect of the bottles being opened! 😂 You are very good at your repairs. It's always good to see these old artifacts returned to their original glory!

[@AwesomeRestorations]

thanks so much. I also like these pops 😊

[@shereebarnes4158]

It was a great restoration 😊 I wish there was a way to have kept the bullet holes that would have been a really great history piece 😊

[@AwesomeRestorations]

thank you so much. For me it made sense to fix the holes but I respect that you think otherwise :)

[@stop8738]

@@AwesomeRestorationsI think you did a good job filling in the holes, it’s restoration for a reason lol. Not half job oration😂. If you read this I love your work!❤

[@johnbernarddavis5137]

45th Squadron Royal Air Force. Translation on back is Through difficulties I arise.

[@AwesomeRestorations]

thanks for info 😊👍

[@China1323]

it kinda looked like a RAR to me which I think would be rich and rare.

[@andrewcoates6641]

Where is the indication of 45 Sqn.? And your translation of the Inscription isn’t quite correct, Ad Astra would be the actual Latin that should have been written ie the inscription in Latin should read “ Per Ardua, Ad Astra” which is the motto of the Royal Air Force meaning “ through difficulties to the stars”. The engraving at the top of the flask shows an eagle in flight and I suspect that the numerals beneath the makers name denote the date of production of the flask, so 0722 indicates that it was initially manufactured or sold to a retailer in July 1922. The engraving and the addition of the RAF cap badge would have taken place probably much later, more than likely during the Second World War, possibly as a gift from a loved one or special friend. In the video the badge appears to be chromed leading me to believe it might have been owned by an officer, as an ordinary rank and file airman or NCO would have been issued with a brass or bronze badge.

[@rixxroxxk1620]

Martin, you are catching all kinds of flack for restoring this to original condition. I have to say you did the right thing. There is no person associated with this flask. No history. No story. You restored it to original condition for all of us to see. Thank you. You always put your heart and soul into your work and I can’t give you enough accolades.❤️

[@klintharder2155]

No history? It's a 100 year old Flask assigned to a specific unknown RAF solder near a famous battlefield in France. I am sure it just caught a couple stray bullets as it fell from the sky on an uneventful sunny day...

[@caliblu-hair7639]

It takes a sorry lack of humanity to say no person is associated with this bullet ridden flask. “No person. No history. No story.”

[@tiffanycoleman1855]

That's like saying the Tomb of the Unknown Soldier has no history or story.

[@rixxroxxk1620]

@@klintharder2155yeah. Ok.

[@rixxroxxk1620]

@@tiffanycoleman1855those soldiers were pulled from a battlefield with facts they passed in battle, unlike a flask with ZERO history and a few target holes in it. PROVE it was in battle, and I’ll change my mind.

[@JohnnyBRad]

I too was a bit mixed on the fixing of the bullet holes as a few have mentioned but that wouldn’t make this an awesome restorations! Plus id much rather know this flask was restored and made awesome once again rather than still being buried and forgotten somewhere in France

[@AwesomeRestorations]

thanks for your comment 😊👍

[@ltjimmynz]

'Per ardua surgo' (meaning 'Through difficulties I arise') was the motto of No. 45 Squadron RAF which was based in France during the First World War but not the Second

[@AwesomeRestorations]

thanks so much for info :)

[@zekeriyakazanci9509]

I always admire your works. Is it only me who think that those bullet holes should be kept? You could just clean the flask but keep the holes as the indication of how fierce is the war.

[@AwesomeRestorations]

I respect your opinion. But how on earth should I pour whiskey in it with these holes? 😊 just kidding, I get what you mean

[@zekeriyakazanci9509]

@@AwesomeRestorations Thank you very much for your understanding respond. 🙂👍

[@grahamturner5963]

A lovely restoration, Martin 👍 I think you were right to fill in holes - a flask full of whiskey is better than a flask full of air 😂

[@AwesomeRestorations]

Thanks 😉👍i thought so too 🍻

[@loupiscanis9449]

Thank you , Martin . The Winged Camel symbolises the fact that the Squadron flew Camel Aircraft during World War I. It also symbolise the long period the Squadron was stationed in the Middle East. The Motto translates as "Through difficulties I arise". The badge was granted in October 1936. 🐺 Loupis Canis .

[@AwesomeRestorations]

Thanks for sharing your knowledge and always leave nice comments. I really appreciate it 😉 👍have a great day, cheers

[@loupiscanis9449]

@@AwesomeRestorations My Pleasure , Martin .

[@user-mu6iy1iq9q]

Ну брат, ты конечно молодец, воскресить из не бытия прошлое, нет слов, смотреть на творения мастера это волшебство, с замиранием сердца, твори и дальше всего тебе самого светлого и наилучшего

[@AwesomeRestorations]

thank you so much for your kind words 😊

[@user-mu6iy1iq9q]

@@AwesomeRestorations

[@user-wo1kc9jw5r]

Удивительное превращение из старой никому не нужной вещи, в прекрасное изделие, знающщее себе цену, ❤❤❤ Мастеру - почёт и уважение! ❤❤❤

[@wolfwillhendy7965]

I appreciate the restoration but personally I find that repairing the flask if the battle damage is very disrespectful to both the soldier and their memory however it was an amazing restoration just in bad taste I'm afraid

[@AwesomeRestorations]

I respect you opinion even though I disagree 😊

[@60gregma]

You have no idea how those bullet holes got there. To me, this looks as if it could have been used for target practice. Since it was in such terrible condition, obviously no one cared for it in any way. It's now a show peice.

[@CantoraMask]

I really like your of use of your unique tool and the zip tie. Those pliers was genius. Not sure why I've never thought of using the zip tie. Brilliant. Personally though I think it would have been better with the bullet holes left in and used as a show piece rather than repairing it

[@AwesomeRestorations]

thanks for your comment, I also respect your opinion about the bullet holes 😊

[@dangeary2134]

Steve Lehto found a Confederate belt buckle many years ago. He did the research on it. Quite a few experts said it was a re-pop. He finally got hold of one expert that heard where he found it, and when, and made an offer that Steve couldn’t refuse. Lehto’s Law Archive, right here on YT

[@nomad090]

While I would have preferred to keep the bullet holes it's not mine to ask. Truly an amazing job.

[@davidenorbedo5555]

For anyone wondering, "per ardua surgo" is latin and means: "trough difficult/unpleasant situations I rise"

[@AwesomeRestorations]

👍👍 thanks

[@univeralbeing1330]

I think the bullet holes meant a lot, however; I love the restoration!!

[@Mr.0s]

What about the chain? it could have been cool looking to see the flask having its chain back but l can understand if the flask is very fragile so risk of adding it back might have break it even more like in 9:57-10:03 but still very amazing looking :)

[@AwesomeRestorations]

the chain was beyond repari so I would have had to attach a new chain but I think that would not have been correct to do 😊

[@Mr.0s]

fair enough, l can respect that choice but still, it looks amazing, keep up the good work!

[@GuyPipili]

Nice job as usual! When the pewter got too hot, it was fortunate that it didn't collapse in on itself. But you had the ability to fill in the hloe. It wasn't a complete failure, it was a challenge that you accepted and conquered!😊

[@AwesomeRestorations]

thanks - glad you liked it. Yes could have gone much worse - glad I was able to repair it 😊👍

[@kevinbacon5142]

A beautiful restoration, sir. How cool would it have been, though, if you could have solidified the inside of the flask while leaving the bullet holes in their places. Like putting a sheet of metal BEHiND the holes. Love your work.

[@Velsbasketcase]

Clear epoxy.

[@AwesomeRestorations]

thanks a lot for your comment 😊

[@eastcoastandloveit3857]

So glad to see this restored . We need to honor the woman and Men who faught for our freedom . True heros .

[@AwesomeRestorations]

thank you so much. Yes you are right 😊

[@UncleLesterCam]

LOVE THIS ONE! While we didn't get any sand blasting, we get a nice not to the favorite libation of Captain Lewis Nixon (Vat 69). Thank you for always keeping us entertained with your incredible talent.

[@AwesomeRestorations]

Glad you enjoyed it, thanks for watching. Also glad that you caught the Nixon reference 😊👍

[@russellgilbertdecastro7031]

Only the finest for Mrs. Nixon's baby boy

[@robertwalker9625]

A wonderful restoration of the flask Martin. I'm not sure of the RAR medallion, but Per Ardua Surgo means "Through difficulties I arise." Question: although it could not be a flask again, but did give thought of keeping the bullet holes in the flask? I'm toasting your video with a Blackstone St. Charles Porter. I hope you and yours are healthy and in good spirits. Cheers from this old retired coot who just celebrated our 51st Wedding Anniversary, living the dream in Tennessee.

[@AwesomeRestorations]

Well congratulations Robert, and thanks for watching, chers from sweden 🍻

[@mendel5106]

The crickets in the background at 2am does it for me.

[@czifear]

Не ошибается только тот, кто ничего не делает! У тебя руки золотые, бро! Отличное видео! Спасибо!

[@AwesomeRestorations]

thank you so much 😊

[@masstrapper7645]

I rather liked the bullet holes but all the same this was another awesome restoration. You’ve done the boys of the RAF proud I have no doubt. 👍👍

[@AwesomeRestorations]

thank you so much glad you liked it 😊

[@patpeters6331]

Impressive that you created a tool to help fixing some dents from the inside of the flask. My goodness, is there anything that you can't do? Much respect for your talent and knowledge

[@AwesomeRestorations]

thank you so much for your kind word 😊

[@samanthadean1083]

Turned out lovely, though I would have also reattached the chain, but it’s your restoration! Awesome job!!! 👍🏻👍🏻👍🏻❤️❤️❤️

[@AwesomeRestorations]

Thank you! 😊 The chain was so fragile that it crumbles apart. So I could not use it and I did not think that a new chain would fit the old flask very well. Cheers :)

[@samanthadean1083]

@@AwesomeRestorations Perfectly understandable! Thanks for replying!!!

[@bikikit]

Всегда приятно смотреть на работу настоящего мастера. Мартин, вы супер❤

[@AwesomeRestorations]

Thanks for your kind words I really appreciate it 👍🙂 cheers buddy ❤

[@76Russian_medved.]

Это мой самый любимый канал,всегда что то новое и интересное,браво мастеру золотые руки👏👏👏👍👍👍

[@AwesomeRestorations]

thank you so much 😊

[@Mamiluz]

This one actually made me a little emotional. I was transported back in time and formulating a scenario in my mind as to the battle which transpired to cause the bullet holes and the soldier who quite possibly lost his life. This was a beautiful piece. I believe it may have belonged to a high ranking officer. The monogram and the marking tell a story 👏🏽👏🏽👏🏽🥰

[@markbeaumont3292]

And the evidence of that aircrew member possibly losing their life was lost forever when the bullet holes were filled in - destroying the history

[@ALPHASASYLUM]

Excellent repair and restoration. The badge is a RAF (Royal Air Force) Cap Badge. Information on the flask is minimal. There was a Sheffield-based silversmith and plating company called William Hutton & Sons. William Hutton & Sons acquired Creswick & Co in 1902 and began to use their crossed arrows marks. William Hutton & Sons was absorbed by James Dixon & Sons in 1930. Awesome work on the repair of the bullet holes. Keep up the good work Martin

[@derandere4965]

Yes, but from what I read, Dixon & Sons kept using the eight crossed arrows and the trademark „Hutton Sheffield“.

[@AwesomeRestorations]

Thanks for watching and for sharing your knowledge I really appreciate it 👍 cheers 🙂

[@ALPHASASYLUM]

@@AwesomeRestorations You are very welcome.

[@jerrycomo2736]

I agree with others that keeping the bullet holes would be cool. Maybe instead of solder to plug the holes, use clear epoxy? That way the holes are plugged, but still visible.

[@AwesomeRestorations]

Thanks Jerry - That was actually a very creative idea to plug the wholes with clear epoxy 👊😉 cheers buddy 💖

[@rohitshukla9756]

Dear Martin, This restoration was very tough but this time you proved yourself again. Precision work. Loved watching.

[@AwesomeRestorations]

many thanks Rohit. Wishing you a lovely day 😊❤

[@briantayler1230]

This is a war artifact. It was worth more money and had more historical value with the bullet holes left in it.

[@tonyk438]

My initial thoughts, too. After thinking about it, though, what are the odds 2 bullets that close in battle? My guess is it was used for target practice by someone.

[@lucamalatesta1370]

​@@tonyk438i think it's a rose of pellets

[@rixxroxxk1620]

If it was known who it belonged to (name, serial number, initials) your statement would stand true. However, none of that is known. There is no story that came with this item. It’s a flask with holes in it.

[@CannonCountry]

Thats 2 different calibers... not likely target practice either... unless it was just 1 shot with 2 different guns. Those are most likely real shots. This never should have been restored. It was an artifact deserving a museum

[@t12121]

Without some kind of connection to a name from ww2, it's just a flask with holes in it from that era.

[@dragonluvrcatluvr9689]

I feel like whomever this flask belonged to would have loved the repair and appreciated the time you took to fix it

[@AwesomeRestorations]

thanks, I am glad you think so 😊

[@Asker____01]

I won't stop saying this, you have golden hands, thanks for the video brother

[@AwesomeRestorations]

Haha, thank you so much 😉👍

[@veraduarte1117]

Ficou simplesmente magnífico. Parabéns!!!!!!!!!!!!!!!!!!!!!!!

[@AwesomeRestorations]

muito obrigado 😊

[@RuthlessGaming5849]

I absolutely love this channel 👍

[@AwesomeRestorations]

thank you so much 😊❤

[@John_McDonnell_76]

What I love about your channel, that other channels DO NOT do, is take the time to fix the dents in the metal in the projects. It really takes your stuff to the next level.

[@AwesomeRestorations]

thank you so much for your kind words I really appreciate it ❤😊

[@Luissanchezisunza]

Well, it is a process called life, in which we all messed up, but the real flavor in life is when we know how to fix our own mistakes!!! Another masterpiece from "el maestro".

[@AwesomeRestorations]

thank you so much Luis 😊

[@risingphoenixrl]

Amazing work on this video, as always so enjoyable to watch!

[@AwesomeRestorations]

Thank you so much! I really appreciate it 😉 cheers 👍

[@nala_rein]

I liked with the bullet holes, it allowed to imagine the story that is hidden behind this flask 😊

[@AwesomeRestorations]

I respect your opinion 😊👍

[@d.sauron]

I feel so rewarded, after doing homework, watching your work. 😊

[@AwesomeRestorations]

Enjoy!

[@reginamatheus9499]

Olá do Brasil 🇧🇷, impossível não deixar um like, seu trabalho tem história e o resultado sempre perfeito 👍👏👏👏😘

[@adammoray9378]

My brother, you've outdone yourself once again. I wonder what the history is on that flask. Such amazing work and craftsmanship as always.

[@AwesomeRestorations]

thanks so much. Yes would be nice to know to whom it belonged :)

[@ricardow9281]

Asked GPT-4 what everything might mean, it gave the following explanation: "The flask you found near Reims, France with the letters "RAF" and the King's Crown on it likely belonged to a member of the Royal Air Force (RAF). The RAF is the United Kingdom's air force, founded in 1918. The inscription "PER ARDUA SURGO" is a Latin phrase that means "I rise through difficulties" or "I rise through adversity." This motto is not the official motto of the RAF, which is "Per Ardua Ad Astra" ("Through adversity to the stars"), but it is a similar phrase that emphasizes overcoming challenges. The words "Hutton.Sheffield" and the numbers "0322" and "2" on the bottom of the flask suggest that it was made by the Hutton company in Sheffield, England. Sheffield has a long history of metalworking and cutlery manufacturing, and Hutton is a company associated with the city. The numbers could be a product or batch number. It is quite possible that the flask belonged to a British airman who served in the RAF during one of the World Wars or in a subsequent conflict. The location near Reims is interesting, as Reims is located in northeastern France and saw significant military activity during both World Wars. If the flask was indeed used by an RAF airman, it could have been dropped or lost during a mission or campaign in that area. It's always fascinating to uncover objects with historical significance, and this flask could potentially offer a glimpse into the past and the experiences of the individuals who once owned and used it."

[@AwesomeRestorations]

Thanks you so much for watching and for sharing your knowledge about this relic. I really appreciate it 👍 Yes a few guys who saw it IRL actually did tell me that I could be pre WW2. Very interesting and awesome to be able to get my hand on these very rare story telling items. :) Have a great day. Cheers my friend

[@ricardow9281]

@@AwesomeRestorations You as well! Love watching these video's, keep it up

[@una_papa777]

I don't care that in Mexico It's 3 in the morning, Martin's videos are worth it ♥️♥️

[@AwesomeRestorations]

thank you so much ❤❤

[@Gmcworrior1]

I myself enjoy all of the service related things you restore. I love that you love it too. Please keep all your content coming. :)

[@AwesomeRestorations]

thanks a lot. I also have a thing for these things so you can be sure that there will be more of this in the future 😊

[@DenisTkachenko]

Спасибо большое за Ваши видео и труд, очень мощно !!! Продолжайте дальше реставрировать вещи, очень интересно смотреть как делаете казалось бы невозможное !!!

[@tok1214]

fala portugues irmao

[@DenisTkachenko]

@@tok1214 Eu escrevi em russo: "muito obrigado por seus vídeos e trabalho, muito poderoso !!! Continue restaurando as coisas, é muito interessante ver como você faz o que parece impossível !!!"

[@raziel3726]

Amazing Restoration 👍🏻👍👍🏽

[@AwesomeRestorations]

thank you so much 😊

[@ManoelJunior]

Congratulations Martin on another successful restoration job, the result was perfect and we have yet another piece of history recovered. Thank you.

[@AwesomeRestorations]

thank you so much Manoel, glad you liked it 😊

[@DenisTkachenko]

Ваш труд и видео не только эстетичные, удивительные, а ещё и просветительные, очень много интересной и полезной информации !!!

[@tok1214]

nada a ve parceiro

[@DenisTkachenko]

@@tok1214 É muito bom que, com habilidades e ferramentas apropriadas, uma pessoa dê uma segunda vida às coisas !!!

[@mikeregnier5390]

Good job❤

[@AwesomeRestorations]

Thank you so much 😀

[@cmcc1971]

I can’t believe you fixed the bullet holes. Dang. You took away so much significance that can never be replaced.

[@AwesomeRestorations]

sorry you feel that

[@RoudyRittern]

В какой-то момент испугался что фляга сломалась именно на месте с надписью "Per ardua surgo". Подумал что очень обидно, но в конце выдохнул😂 Очень нравятся твои ролики и твоя работа, друг, выпускай ролики чаще, по возможности😊

[@AwesomeRestorations]

thank you so much I will try to publish more often 😊

[@user-xf5ic8oo1b]

Скорей всего эта фляга для коньяка 😃😃👍👍👍

[@AwesomeRestorations]

maybe 😊

[@kevinhampton2068]

For me, repairing the bullet holes removed the history of the flask. Unforgivable that such an interesting item with so much history was reduced to a novelty.

[@AwesomeRestorations]

sorry to hear that you feel that but I respect your opinion

[@TapscottJ]

Great job, the idea of using the balls to clean the inside was…awesome!

[@diegoboffa9134]

A huge pleasure as always Martin. Congratulations once again for a beautiful restoration my friend! Cheers and hope to see you soon again!

[@AwesomeRestorations]

Thank you! Cheers!

[@Miguel_ON65]

Nice my friend, great job. You must be proud of repair something with a lot of history on it. Congratulations

[@AwesomeRestorations]

Thank you very much!

[@LayAnn]

In case anyone is curious, the inscription Per Arduo Surgo at the bottom of the bottle means "Though I rise Steeply".

[@AwesomeRestorations]

👍👍 thanks for info

[@SalvageRestore]

This is wonderful! I recently dreamed that I was on a tour of your workshop)

[@AwesomeRestorations]

glad you liked it. How funny 😊

[@arturmessi1482]

В процессе реставрации была утеряна цепь и некоторое количество виски... Но в дальнейшей эксплуатации фляга была наполнена не раз и ответственно давала своему владельцу 🥃 в нужный момент. Спасибо Мартин! U R ze best!!!

[@AwesomeRestorations]

thank you so much I really appreciate it 😊❤

[@claudetechiarello3538]

Mais uma restauração incrível!

[@TheBubbaClemson]

Can't believe you repaired the one , well two, things that gave this greater value, collect ability and character... The bullet holes.

[@AwesomeRestorations]

sorry you are dissapointed

[@TheBubbaClemson]

@@AwesomeRestorations just a note on collectability ... But seriously, it's an awesome restoration

[@chandarussell]

A Royal Air Force hip flask. My uncle had one. He flew Lancaster bombers during WW2. Nice job on this flask.

[@AwesomeRestorations]

thanks a lot for info - cool 👍

[@Skybaby79]

The bullet holes make this a very haunting piece.

[@AwesomeRestorations]

😉👍

[@mirtacastelli8224]

Eres lo ¡MAXIMO! ,en restauraciones, y en sorprender con tu tecnica de trabajo sino además en la calidad muy cuidada de tu video. Gracias por compartir tu pasión. Desde Salta Argentina cariños Mirta.❤

[@user-rr6jn5yq5u]

Seriously, your video is the best regarding restoration 😊

[@AwesomeRestorations]

Thank you so much 😉👍

[@marcezs08]

Awesome job giving this piece a new life so that it may get used again and be a part of living history instead of staying buried and forgotten

[@AwesomeRestorations]

Yes I think so to. Thanks for watching I really appreciate it 👍❤

[@SarahAdamsVoice]

Your talent for giving new life to these relics astounds me. Such a cool little flask, and it really makes you wonder about the story of the soldier who had it.

[@AwesomeRestorations]

thank you so much I appreciate it. Yes it would be cool to know the history and the owner of the flask 😊

[@ludmilabevan3283]

RAF stands for Royal Air Force. This flask belonged to a British pilot. My farther - in - Law was in RAF during WWII serving in Burma. I still have his badge. Great restoration as always but you should have left the holes. Without them it is just another flask like many. With them it is a part of history.

[@AwesomeRestorations]

Thanks for sharing your story, i really enjoy reading peoples stories. Respect to your father🫡

[@ludmilabevan3283]

@@AwesomeRestorations Thank you! ❤

[@brianchester4218]

The Seagull as most are aware is an Albatross and the RAF cap badge is still worn to this day, nice job looks great

[@GenjiAttala.L]

I always watch awsome restoration videos while eating, all the processes in the video are very satisfying

[@AwesomeRestorations]

thanks glad you liked it

[@Mordrag01]

I have huge respect for such findings, the last person who drank from it may have been killed through these two bullet holes.

[@g1bs0n60]

I had to go back to actually see if that scrub daddy blinked at me 😂 great video. Soon as I seen the RAF I was deep in this video 👌

[@AwesomeRestorations]

Glad you enjoyed

[@randall1959]

I sure hope the poor chap didn't die. Another fantastic restoration 👍

[@AwesomeRestorations]

I hope so too. Thanks a lot ❤

[@Einherjar_17]

Beautiful video as always Martin, thank you very much for sharing it, I send you a big hug from southern Argentina.

[@AwesomeRestorations]

Glad you enjoyed it

[@Tatiana-vrn]

Очень редкая вещь. Спасибо, что отнеслись с уважением к этой реликвии.❤ Мой прадед участвовал в Первой мировой войне в чине штабс- капитана, 49-й Брестский гвардейский пехотный полк его Императорского Величества Великого князя Михаила. Но в 1917 году произошла революция и история страны изменилась.

[@AwesomeRestorations]

thank you so much for your comment 😊

[@mskayla7747]

I do so enjoy the care you put into war relics restorations. 👍

[@AwesomeRestorations]

thanks, very happy to hear that 😊

[@SilverSniper75]

Because i am a collector of antique pieces I personally would never have closed the holes, I prefer it original but different strokes for different folks. Non the less, great job

[@RestoreMore]

That flask really deserved a Scottish single malt at the end but the VAT 69 will do 😂Great restoration buddy!

[@AwesomeRestorations]

😊😊 VAT is a salute to Nixon from Band of Brothers

[@RestoreMore]

@@AwesomeRestorations I missed that reference! Good thinking Brother 😎😎

[@travwilson7827]

Ingenious repair. Thinking of the RAF airman who may have lost his life to those bullets.

[@AwesomeRestorations]

❤❤

[@pnm5533]

I am a subscriber to the channel and I do not lose a video, I am learning how to restore. I suggest that the materials used be informed. Good job!

[@AwesomeRestorations]

thanks for watching and subbing. I still have to have some secrets so I can't reveal everything :)

[@evan_walsh]

I wish you kept the bullet holes. That flask had a story to tell!

[@AwesomeRestorations]

Thanks for your input 😊

[@victorlimabusologo]

Royal Air Force ❤ Great Job Martin! You're the best

[@AwesomeRestorations]

Thanks viktor 😉👍

[@soldaat-van-oranje]

Man do you understand that any project you do is awesome/amazing 🙏 you make it look easy but some real craftsman stuff love it always

[@AwesomeRestorations]

thank you so much for your kind words I really appreciate it 😊

[@rodrigosa1978]

Realmente o valor de uma peça ,mesmo nesse estado , é imensurável. Mas o seu trabalho, dedicação e detalhamento na restauração, merece palmas . Parabéns pelo seu trabalho.

[@AwesomeRestorations]

muito obrigado 😊

[@user-ml7qy9vt7x]

Обожаю этот канал ❤ обожаю этого мастера😊 получаю просто эстетическое удовольствие от его работы! Нравится уханье совы, животные с проволокой, и всякие баночки, бутылочки, инструменты) и нравится сам мастер👍 производит впечатление очень доброго человека, с отличным чувством юмора😉

[@AwesomeRestorations]

Thank you so much for watching, and for your kind comment! i really try to make it as relaxing as possible, so seeing these comments make my day 😉👍 Cheers from sweden 🍻

[@alexbeita]

Great restoration. I would have loved it more if you would have kept the bullet holes by adding 2 tubes inside them and sealing them, so you could have still see through the holes and the liquid would not leak

[@AwesomeRestorations]

Wait, thats actually a good idea 🤔

[@bigtgamer9680]

I was kinda hoping for either a glass or resin fix for the bullet holes. Leaves the great story while also repairing the item

[@AwesomeRestorations]

thanks for input 👍

[@alexmeza392]

The state in which it was left is impressive. Accidents only help us improve and here it was evident. One more video of detail and your great technique. The crickets are watching you closely. Thank you!

[@AwesomeRestorations]

ha ha thanks Alex - glad that you liked this on as well :) have a great day 💖😉

[@tradeMark182]

So happy for a new video i will watch it at home later🎉

[@AwesomeRestorations]

thanks a lot hope you will enjoy it 😊

[@tradeMark182]

Came back for this and it was a banger thank you AR

[@rutikuiwa7133]

Man you are simply the best restoration people

[@AwesomeRestorations]

thanks so much I really appreciate it 😊

[@luckydogs89]

Yes Royal Air Force Kings Crown Badge. Great job

[@AwesomeRestorations]

thanks a lot 👍

[@ianwalls4976]

Amazing transformation Martin thankyou for the episode 👏

[@AwesomeRestorations]

No problem, thansk for watching 😉👍